Muchos saludos y bendiciones a toda esta hermosa comunidad, amigos creativos hoy voy a compartir con todos ustedes, un porta cubierto de tela, espero les guste y le sea de mucha utilidad.
Many greetings and blessings to all this beautiful community, creative friends today I will share with all of you, a fabric cover holder, I hope you like it and it will be very useful.
Español:
Materiales:
- Dos retazo de tela, 1 Beige y el otro estampado. ( Pueden usar el de su preferencia ).
- Cinta decorativa dorada.
- Aguja de coser.
- Hilo.
- Tijera.
- Lápiz.
- Regla.
- silicon en barra.
- 1piedrita decorativa, con el diseño de una fresa.
English:
Materials:
- Two scraps of fabric, 1 Beige and the other printed ( You can use the one of your preference ).
- Gold decorative ribbon.
- Sewing needle.
- Thread.
- Scissors.
- Pencil.
- Ruler.
- Silicone stick.
- Decorative stone, with the design of a strawberry.
Español:
Paso 1:
- Marcamos y recortamos la tela beige con una medida de 42 cm x 15 cm, luego cortamos dos más, de 15 x 15 cm uno beige y el otro estampado, después colocamos el cuadrado beige del lado al revés en una de las puntas de la otra tela, comenzamos a coser por todo el borde del cuadrado dejando sin coser la parte de abajo, para cuando tengamos que voltear la tela al derecho.
English:
Step 1:
- We mark and cut the beige fabric with a size of 42 cm x 15 cm, then we cut two more, of 15 x 15 cm, one beige and the other printed, then we place the beige square on the wrong side on one of the ends of the other fabric, we begin to sew around the edge of the square leaving the bottom unsewn, for when we have to turn the fabric right side out.
Español:
Paso 2:
- Después de coser el cuadrado beige colocamos la tela estampada, pero del otro lado de la tela dejándola al derecho, luego la cosemos de igual forma que la anterior por todos los bordes; seguidamente procedemos a voltear el cuadrado beige al derecho, para terminar de coser en ambos lados haciendo un dobles hacia arriba dejando un espacio de 5 cm de la otra punta, quedando la tela estampada hacia dentro, luego hacemos un dobles hacia fuera quedando una pestaña con la tela estampada.
English:
Step 2:
- After sewing the beige square we place the printed fabric, but on the other side of the fabric leaving it to the right, then we sew it in the same way as the previous one along all edges; then we proceed to turn the beige square to the right, to finish sewing on both sides making a double upwards leaving a space of 5 cm from the other end, leaving the printed fabric inside, then we make a double outwards leaving a flange with the printed fabric.
Español:
Paso 3:
- Ahora decoramos nuestro porta cubierto con la cinta dorada, la colocamos pegándola con silicon caliente por el borde de arriba de la tela estampada, luego hacemos un lazito con la misma cinta y pegamos, terminando pegando la fresita decorativa al lazo.
English:
Step 3:
- Now we decorate our covered holder with the golden ribbon, we place it by gluing it with hot silicone on the top edge of the printed fabric, then we make a bow with the same ribbon and glue it, finishing by gluing the decorative strawberry to the ribbon.
Este es mi resultado final, nos vemos en el próximo post.
This is my final result, see you in the next post.
Todas las fotos son de mi autoria y editadas con Canva. Traductor: DeepL Translate.
All photos are my own and edited with Canva. Translator: DeepL Translate.