Hola amigos de esta comunidad
Feliz día a todos los padres, espero su día haya sido especial.
Les doy la bienvenida a todos los que me visitan.
Ahora te invito a que me acompañes a ver y aprender!.
| Cartón | Telas | Foami |
|---|---|---|
| Adorno dorado | Aros plásticos | Piedra |
| Guata | Hilo dorado | Tijera |
| Pinturas | Pinceles | Lápiz |
| Regla | Tizas | Palito de madera |
| Mdf | Cola blanca | plancha eléctrica |
| Pañito | Mod podge | Silicón |
| Cuchilla | Dibujo |
Comencemos:
Paso 1:
Recortar y armar estructura.
- Recorta y Marca la silueta de la mujer sobre el cartón o cartulina y recorta 2 piezas, luego mide el contorno de la figura y traza en cartulina 2 tiras de 3cms de ancho por el largo de la figura, divide cada una en centímetros y recorta las pestañas sacando triángulos para que sean más fácil pegar.
- Ahora aplica silicón en el borde la figura y comienza a pegar las pestañas y deja secar, luego repite el procedimiento con la tapa hasta armar la estructura del busto de la mujer.
Paso 2:
Transferir al foami.
- Remarca el dibujo y transfiere frotando sobre el foami con la ayuda de la tijera y recorta por la orilla.
- Luego comienza a sombrear con el pincel angular por todas las líneas de la cara.
- Aparte pinta los ojos rellenando primero con blanco, deja secar y luego moja la punta trasera de un pincel y pinta con verde el centro del ojo, y mientras seca, pinta cejas y delinea con negro la naríz y ojos.
Paso 3:
Delinear y maquillar rostro.
Repasa las cejas y pinta los párpados con un tono rosa y luego con un pincel pon un poco de claridad en la naríz y párpados justo debajo de las cejas aplica silicón y pega sobre la base de cartón.
Paso 4:
Forrar base y recortar turbante.
- Luego mide el ancho de la figura y recorta con una cuchilla, una o dos tiras en foami y pega.
- Aparte recorta y pedazo de tela calculando cubra la cabeza y a los lados pega pedazos de guata para que no se vea el filo del cartón y después aplica silicón en la parte trasera de la cabeza y pegar la tela.
Paso 5:
Pegar turbante.
- Toma un extremo de la tela y dobla como se vé en la foto, aplica silicón y pega, luego sigue haciendo pliegues y vas pegando cada uno con silicón y repites igual en el otro lado tratando que los pliegues queden en el centro.
- Aparte recorta un pedazo de tela en forma de hoja y haz un nudo en el centro y pega para tapar la unión de los pliegues del centro.
- Luego recorta una tira de 1cm de ancho en lamé dorado y forra las argollas, y cuando sequen, pasar un hilo dorado por toda la argolla.
Paso 6:
Boca y argollas.
- Ahora recorta en foami rosado la boca, pinta y coloca sobre la plancha eléctrica para que tome forma, luego aplica silicón por la parte trasera y pega a la cara.
- Nuevamente aplica silicón en la parte de abajo del cartón y pega la tela de la blusa, pegando a ambos lados.
-Después aplica silicón y pega el adorno dorado en el cuello y pega la piedra roja en el centro.
¿Qué te ha parecido hasta los momentos?
Paso 7:
Detalles.
- Aplica el brillo dimensional en los ojos y boca, se deja secar de 6 a 12 horas, también le puedes aplicar brillo de uñas.
- Luego corta tiras de foami negro de 1milímetro y enrolla en un palito de madera y pasa por la plancha caliente sin soltar las puntas, deja enfriar y te quedarán unos bonitos rulos y pega en la frente 2 y dos justo donde pegaste las argollas.
- Así queda lista esta hermosa africana.
Paso 8:
Pintar el mdf.
- En un recorte de mdf, haz un orificio y pega un palito de madera, luego pinta con pintura acrílica color vainilla y pasa dos o tres manos dejando secar entre cada aplicación.
- Aparte toma con un pincel pega blanca en cantidad y aplica sobre la tabla pintada y deja secar bien.
- EL otro pedazo de mdf pintalo en marrón oscuro.
Paso 9:
- Ahora pasa una capa de pintura marrón sobre la vainilla y sin dejar secar bien, humedece un pañito y pasa retirando la pintura esto lo harás hasta el color deseado, yo la quise bien clara para que le diera claridad a la figura.
- Deja secar bien y pega sobre la base marrón.
- Por último aplica silicón al palito de madera y haz un pequeño orificio en la base del busto de la africana e inserta para pegar y terminar este trabajo.
Fuente:
https://www.pinterest.es/pin/344806915230602278/
Espero te guste y animes a realizarlo.
Mi publicación la edité con etiquetas HTML
Traducida con DeepL.
Las fotos capturadas con mi Teléfono Blu G5.
Editadas con Pic Collage.
Ahora me despido agradecida de tu visita y compañía, esperando sea de tu agrado y deseando te animes y hagas una.
Muchas gracias por tu apoyo y si te gustó deja un comentario, me encantará verlo.
Saludos..
Ingles:
Hello friends of this community.
Happy day to all the fathers, I hope your day was special.
I welcome all of you who visit me.
The structure of this figure is made with cardboard, lined with foami and decorated with fabric scraps and the base is made of leftover mdf.
Now I invite you to join me to watch and learn!
| Cardboard | Fabrics | Foami |
|---|---|---|
| Golden ornament | Plastic hoops | Stone |
| Wadding | Golden thread | Scissors |
| Paints | Paintbrushes | Pencil |
| Ruler | Chalks | Wooden stick |
| Mdf | White glue | electric iron |
| Mod podge | Silicone | |
| Knife | Drawing |
Let's get started:
Step 1:
Cut out and assemble structure.
- Cut out and mark the silhouette of the woman on the cardboard or cardboard and cut out 2 pieces, then measure the outline of the figure and draw on cardboard 2 strips of 3cms wide by the length of the figure, divide each one in centimeters and cut out the tabs taking out triangles to make them easier to glue.
- Now apply silicone on the edge of the figure and start gluing the tabs and let dry, then repeat the procedure with the lid to assemble the structure of the bust of the woman.
Step 2:
Transfer to foami.
- Outline the drawing and transfer by rubbing on the foami with the help of the scissors and cut along the edge.
- Then start shading with the angled brush along all the lines of the face.
- Then paint the eyes filling first with white, let dry and then wet the back tip of a brush and paint with green the center of the eye, and while it dries, paint eyebrows and outline with black the nose and eyes.
Step 3:
Outline and make up face.
Go over the eyebrows and paint the eyelids with a pink tone and then with a brush put some clarity on the nose and eyelids just below the eyebrows apply silicone and glue on the cardboard base.
Step 4:
Line the base and cut out the turban.
- Then measure the width of the figure and cut with a knife, one or two strips of foami and glue.
- Then cut out a piece of fabric to cover the head and glue pieces of wadding on the sides so that the edge of the cardboard is not visible and then apply silicone on the back of the head and glue the fabric.
Step 5:
Glue turban.
- Take one end of the fabric and fold as shown in the picture, apply silicone and glue, then continue making folds and glue each one with silicone and repeat the same on the other side trying to keep the folds in the center.
- Separately cut a piece of fabric in the shape of a leaf and make a knot in the center and glue to cover the union of the folds in the center.
- Then cut a 1cm wide strip of gold lamé and line the rings, and when dry, run a gold thread through the whole ring.
Step 6:
Mouth and rings.
- Now cut out the mouth in pink foami, paint it and place it on the electric iron to take shape, then apply silicone on the back and glue it to the face.
- Again apply silicone on the bottom of the cardboard and glue the fabric of the blouse, gluing on both sides.
-Then apply silicone and glue the gold ornament on the neck and glue the red stone in the center.
What do you think so far?
Step 7:
Details.
- Apply the dimensional glitter on the eyes and mouth, let it dry for 6 to 12 hours, you can also apply nail polish.
- Then cut black foami strips of 1milimeter and roll on a wooden stick and pass through the hot iron without releasing the ends, let cool and you will have beautiful curls and glue on the forehead 2 and two just where you glued the rings.
- This way this beautiful African is ready.
Step 8:
Paint the mdf.
- In a cutout of mdf, make a hole and glue a wooden stick, then paint with acrylic paint vanilla color and spend two or three coats, letting dry between each application.
- Then use a brush to apply white glue in quantity and apply it on the painted board and let it dry well.
- The other piece of mdf paint it in dark brown.
Step 9:
- Now pass a coat of brown paint on the vanilla and without letting it dry well, moisten a cloth and pass removing the paint this you will do it until the desired color, I wanted it very clear to give clarity to the figure.
- Let it dry well and paste over the brown base.
- Finally apply silicone to the wooden stick and make a small hole at the base of the bust of the African and insert it to glue and finish this job.
Source:
https://www.pinterest.es/pin/344806915230602278/
I hope you like it and encourage you to do it.
I edited my publication with HTML tags.
Translated with DeepL.
The photos captured with my Blu G5 Phone.
Edited with Pic Collage.
Now I say goodbye grateful for your visit and company, hoping it is to your liking and wishing you cheer up and make one.
Thank you very much for your support and if you liked it leave a comment, I will love to see it.
Greetings...