Hola mis queridos amigos, cómo están?
Por aquí deseando que este fin de semana sea provechoso para todos.
Necesitarás:
| Fomi verde | Pinturas y pinceles |
|---|---|
| Tijera | Cuchilla |
| Porrón o maceta | Icopor |
| Palillos | Lápiz |
| Molde | Silicón |
| Adorno | Musgo |
| Plancha eléctrica |
Comencemos:
Paso 1:
- Dibuja en un papel tres (3) tamaños de hojas y recorta, luego coloca sobre una lámina de foami verde y marca todo el contorno de cada hoja marcando cuantas piezas quieras, en mi caso (7) y luego recorta.
- Ahora con un pincel punta fina, comienza a pintar en forma horizontal trazos subiendo y bajando con pintura verde hasta completar la hoja y deja secar. (ver foto).
- Repite este procedimiento con todas las hojas, luego con pintura blanca pasa una línea con pintura blanca por todo el borde de las hojas (base), deja secar y luego mezcla pintura blanca y amarilla y vuelve a pintar el contorno.
Paso 2:
- Pintadas y secas todas las piezas, calienta la plancha y coloca a calentar para darle la forma que quieras.
- Aparte recorta con la cuchilla el trozo de icopor tomando la medida de la boca de la maceta y pinta en marrón.
Paso 3:
- Aplica silicón en la orilla del icopor e inserta dentro de la maseta, luego aplica silicón sobre el icopor y pega el musgo rellenando todo la pieza y deja secar.
- Pega en la parte de atrás de las hojas unos pequeños palillos y vas insertando en la maceta.
Paso 4:
- Después de insertar todas las piezas (hojas)aplica silicón en el adorno y pega en el contorno de la maceta para decorar, así de fácil queda listo esta hermosa planta.
En versión natural purifica el aire!
Fuente:
https://g.co/kgs/sPLWPo
Y llegó la hora de despedirme no sin antes mencionar el traductor utilizado para esta publicación es DeepL, las etiquetas HTML y las fotos capturadas con mi teléfono Blu G5 y editadas con Pic Collage.
Espero te guste mi tutorial y agradezco mucho tu visita y apoyo.
English:
Hello my dear friends, how are you?
Here wishing you all a profitable weekend.
You will need:
| Green Foami | Paints and paintbrushes |
|---|---|
| Scissors | Blade |
| Pot or pot | Icopor |
| Sticks | Pencil |
| Mold | Silicone |
| Flame | Moss |
| Electric iron |
Let's get started:
Step 1:
- Draw three (3) sizes of leaves on a piece of paper and cut them out, then place on a sheet of green foami and mark all the outline of each leaf marking as many pieces as you want, in my case (7) and then cut them out.
- Now with a fine tip brush, start painting horizontally up and down strokes with green paint to complete the leaf and let dry (see photo).
- Repeat this procedure with all the leaves, then with white paint pass a line with white paint around the edge of the leaves (base), let dry and then mix white and yellow paint and repaint the outline.
Step 2:
- Once all the pieces are painted and dry, heat the iron and place to heat to give it the shape you want.
- Cut with the knife the piece of Styrofoam taking the measure of the mouth of the pot and paint it in brown.
Step 3:
- Apply silicone on the edge of the foam and insert inside the pot, then apply silicone on the foam and glue the moss filling the whole piece and let it dry.
- Glue some small sticks on the back of the leaves and insert them into the pot.
Step 4:
- After inserting all the pieces (leaves) apply silicone on the ornament and glue on the contour of the pot to decorate, so easy is ready this beautiful plant.
In natural version purifies the air !
Source:
https://g.co/kgs/sPLWPo
And it's time to say goodbye not without mentioning the translator used for this publication is DeepL, the HTML tags and the photos captured with my Blu G5 phone and edited with Pic Collage.
I hope you like my tutorial and thank you very much for your visit and support.