Hola a todos los amigos que visitan mi Blog.
Entonces espero disfrutes de este paso a paso!
Comencemos:
| Cinta de papel | Cartulinas |
|---|---|
| Foami | Pinturas y pinceles |
| Cola blanca | Silicón |
| Escarcha | Tiza |
| Lápiz | Tijeras |
| Plancha eléctrica | Moldes de pétalos y hojas |
¿Listos los materiales?
Entonces acompáñame y aprende
Paso 1:
Recortar pétalos y pintar.
- Dibuja los moldes de las flores, sino no lo sabes hacer imprime o calca 3 pétalos, pequeño 3,5cm, mediano 4,0cm y grande 4,5cm, luego abre o desenrolla la cinta de papel y coloca el molde sobre la cinta y recorta 6 pétalos de cada tamaño.
- Luego haz una bolita de algodón y frota sobre una tiza roja y comienza a pintar los 18 pétalos.
- Ahora frota el algodón sobre la tiza negra y matiza pintando la base del los 6 pétalos más pequeños.
- Aparte recorta dos círculos pequeños de 1,5 y 2,5cm, pasa pintura o tiza por la orilla y calienta la plancha a temperatura media, luego coloca los círculos para que tomen forma y recorta 2 círculos de 3,5cms de cartulina aproximadamente.
Paso 2
Rizar y Pegar pétalos.
- Marca la circunferencia roja sobre la cartulina y comienza a pegar los 6 pétalos grandes por todo el contorno marcado, y con un marcador o tijera dá forma a los pétalos, luego aplica nuevamente silicón y pega los pétalos medianos y vuelve a repetir los pasos anteriores y pega los pétalos pequeños.
Paso 3:
Pintar y armar las flores.
- Después de pegar los pétalos, pinta con delineador unos pistilos, deja secar, luego recorta dos círculos en foami negro y pega de base en el centro de la flor, luego pega el centro rojo.
- Ahora toca recortar, pintar y armar media flor, repitiendo todos los pasos anteriores.
Como puedes ver son muy sencillos y fáciles estos pasos.
Y así quedarán de hermosas estas flores!.
Paso 4:
Dibujar y recortar hojas:
- Dibuja la forma de hojas que prefieras, marca en cartulina verde, recorta y dobla por la mitad.
- Liga o une pintura verde y marrón y con un delineador pinta los nervios de las hojas y luego delinea por las orillas con pintura verde o tiza.
Paso 5:
Marco de Cuadro:
- Marca en cartulina, tiras de 1,5 o 2cms de grueso por el largo que necesites.
- Luego recorta con cuchilla las 4 tiras, arma el marco y pega sobre cartón, cartulina o el material que tengas de base para tu cuadro.
Paso 6:
Figuras con cola blanca.
- Ahora con la cola escolar haz arabescos, figuras con pega y luego rocía con escarcha, deja secar y por último pega las flores, hojas y ramitas.
- Si quieres guindar, sólo marca el centro en la parte posterior y pega un pedacito de cinta.
Así queda listo este Hermoso Cuadro.
Paso 7:
- Esta también es otra forma de exhibir tu hermoso cuadro, es en este paral hecho en mdf, que más adelante les enseñaré como hacer.
- Puedes colocar en cualquier parte de manera vertical u horizontal. Todo es cuestión de gusto.
Así que espero te guste mi tutorial y te animes a hacerlo para que decores cualquier espacio.
Te dejaré fotos para que mires lo bonitas que se ven las flores sobre el cuadro.
Mi tutorial esta editado con DeepL
Editado con etiquetas HTML
Y las fotos tomadas con mi Blu G5 y editadas con Pic Collage.
Ahora me despido agradeciendo tu visita, apoyo y si te gustó me encantará leer tu comentario.
Cuídense mucho.
Saludos, se les quiere y espero mi tutorial les sea útil.
Ingles:
Hello to all my friends who visit my Blog.
So I hope you will enjoy this step by step!
Let's get started:
| Paper Tape | Cardboards |
|---|---|
| Foami | Paints and brushes |
| White glue | Silicone |
| Schalk | Chalk |
| Pencil | Scissors |
| Electric iron | Petal and leaf molds |
Are the materials ready?
Then join me and learn!
Step 1.
Cut out petals and paint.
- Draw flower molds, if you don't know how to do this print or trace 3 petals, small 3.5cm, medium 4.0cm and large 4.5cm, then open or unroll the paper tape and place the mold over the tape and cut out 6 petals of each size.
- Next, make a cotton ball and rub over a red chalk and start painting the 18 petals.
- Now rub the cotton ball over the black chalk and shade by painting the base of the 6 smaller petals.
- Cut out two small circles of 1.5 and 2.5 cm, run paint or chalk around the edge and heat the iron over medium heat, then place the circles to take shape and cut out 2 circles of about 3.5 cm from cardboard.
Step 2
Curl and glue petals.
- Mark the red circumference on the cardboard and start gluing the 6 large petals all around the marked outline, and with a marker or scissors shape the petals, then apply silicone again and glue the medium petals and repeat the previous steps and glue the small petals.
Step 3.
Paint and assemble the flowers.
- After gluing the petals, paint some pistils with eyeliner, let them dry, then cut out two circles in black foami and glue the base in the center of the flower, then glue the red center.
- Now it's time to cut out, paint and assemble half a flower, repeating all the previous steps.
As you can see these steps are very simple and easy.
**And this is how beautiful these flowers will look!
Step 4: **Draw and cut out leaves.
Draw and cut out leaves:
- Draw the leaf shape of your choice, mark on green cardstock, cut out and fold in half.
- Bind or attach green and brown paint and with an eyeliner paint the veins of the leaves and then outline around the edges with green paint or chalk.
Step 5:.
Picture Frame:
- Mark on cardboard, strips of 1.5 or 2cms thick by the length you need.
- Then cut the 4 strips with a knife, assemble the frame and glue on cardboard, cardboard or whatever material you have as a base for your picture.
Step 6.
Figures with white glue.
- Now with the school glue make arabesques, glue figures and then sprinkle with frosting, let dry and finally glue the flowers, leaves and twigs.
- If you want to hang, just mark the center on the back and glue a piece of ribbon.
This is how this beautiful picture is ready.
Step 7.
- This is also another way to display your beautiful picture, it is in this parallel made in mdf, which later I will show you how to make.
- You can place it anywhere vertically or horizontally. It's all a matter of taste.
So I hope you like my tutorial and I encourage you to do it to decorate any space.
I will leave you pictures so you can see how beautiful the flowers look on the picture.
My tutorial is edited with DeepL
Edited with HTML tags
And the pictures taken with my Blu G5 and edited with Pic Collage.
Now I say goodbye thanking you for your visit, support and if you liked it I will love to read your comment.
Take care of yourselves.
Greetings, you are loved and I hope my tutorial will be useful to you.