Buenas tardes mis queridos amigos, espero y deseo que disfruten este fin de semana largo y puedan pasarla bien junto a su familia.
Y si quieres aprender, entonces esta es tu oportunidad.
Como algunos amigos saben, me encantan las manualidades y si es primera vez que entras a mi blog, bueno ahora lo sabes jajajaja... y hacer cajas es una de las manualidades que siempre realizo.
Así que te invito a que me acompañes a ver como la hago, prometo que te va a gustar y vas a aprender.
Los materiales que vas a necesitar son:
| Cartulina corrugada y doble faz | Recortes de Foami |
|---|---|
| Cartulina escolar blanca | Pinturas y pinceles |
| Palito de madera | Tijera |
| Silicón líquido | Cartón reciclado |
| Lápiz | Plancha eléctrica |
| Dibujo o impresión |
Ya ubicaste los materiales?
Entonces comencemos:
Paso 1:
Base de la Caja.
Dibujar, recortar y armar:
- Lo primero que harás será dibujar sobre la cartulina doble faz una circunferencia del tamaño que necesites, puede ser con un compás, tapa plato, etc. luego recorta 1,5 o 2 cms más grande (pestaña).
- Pasa la punta de la tijera por el contorno de la circunferencia, y recorta sacando triángulos para que al doblar hacia arriba no peguen unos con otros.
- Aparte mide el contorno de la circunferencia y dibuja en la cartulina corrugada una tira con esas medidas y le vas a aumentar 2 ó 3 cm al largo y le pondrás la altura que desees, recorta y luego aplica silicón por una orilla, pega a la base, cierra la tira hasta que seque bien.
Paso 2:
Tapa de la caja.
Dibujar, recortar y armar:
- Coloca la base que acabamos de realizar sobre la cartulina y marca por todo el borde, y aumenta 1 ó 2 milímetros para que no te quede apretada la tapa y aumenta 1,5 cms de pestaña y luego repite el mismo procedimiento que hiciste en el paso 1. (Ah y se me olvidó, antes de cerrar la tira de la tapa, pon la tapa a la caja y termina de pegar la tira para que no tengas problema al colocar la tapa.) y para rematar la base y la tapa, recorta y pega una tira de cartulina de 2 ó 2,5cm para tapar la pestaña que queda por dentro.
Paso 3:
- El paso 1 y 2 los realicé en miniatura para que aprecies bien el procedimiento y aquí te muestro el resultado de la caja elaborada.
Paso 4:
Figuras de Foami:
- Remarca el dibujo con lápiz de mina blanda, empieza a transferir las piezas al foami colocando el dibujo remarcado sobre el foami y frota con las orejas de la tijera, cada pieza de la figura en el color correspondiente y recorta recuerda que hay piezas que recortarás al ras,(nariz y parte blanca de la cola) estas son las que irán arriba, y a las que van debajo debes dejar un borde.
En un próximo tutorial les explicaré este paso a paso a los amigos que no saben trabajar con foami.
Paso 5:
Ahora rellena primero la parte blanca de los ojos, deja secar y luego pinta el iris.
Luego moja en agua el pincel angular, pasa por un paño y quita el exceso de agua dejando húmedo, y moja la punta del pincel en pintura canela y comienza a pasar por las líneas del dibujo, pasa primero por las más largas, deja secar y luego por las cortas.
Lava el pincel y repite el procedimiento con cada color, para dar más profundidad, pasa con marrón oscuro. y luego pinta con la parte redonda del pincel las huellas de las paticas y deja secar.
Ahora aplica silicón en el bigote y comienza a pegar armando la cabeza.
Paso 6:
- Delinea los ojos y pinta pestañas y boca con marcador punta fina o con pincel, pega la nariz y pinta puntos de luz en los ojitos.
- Pega las piezas y arma la figura, luego aplica silicón en la parte posterior y pega a la cartulina blanca haciendo un poco de presión.
- Recorta por todo el contorno de la figura dejando 2 ó 3 milímetros de borde.
Así queda terminada la figura principal para colocar en la caja.
- Ahora recorta y pinta hojas tropicales de distintos modelos.
Paso 7:
- Seguimos... dibuja o marca sobre el foami flores, recorta y haz en el centro un orificio con un palito de madera.
- Con un retazo de foami, recorta y haz pistilos e introduce en las flores.
- Ahora recorta un rectángulo pequeño de cartón de caja y enrolla para dar forma de tronco, aplica silicón, pega y deja secar.
- Para tapar las puntas, aplica silicón, pega a un pedacito de cartón y recorta.
- Aplica pintura marrón oscuro y luego matiza con color beige, semejando madera y deja secar.
Paso 8:
- Introduce 2 palitos de madera en cada patica de afuera de la figura y marca en el tronco para hacer los orificios con algo punzante.
- Aplica silicón en los palitos y mete en los orificios, luego aplica silicón en la base del tronco y pega en el centro de la tapa de la caja.
- Comienza a decorar pegando las hojas y las flores en forma armoniosa, tratando de no tapar la figura principal.
Paso 9:
- Al terminar de decorar con las flores y hojas, recorta una tira de 1/2 cms y pega a la base de la caja justo en el borde de la tapa, verás que le da un toque muy lindo a esta caja.
Así quedó terminada esta Linda Caja que le podrás dar la utilidad que desees ya sea como caja de regalo, cotillón, para lazos, en fin para lo que la necesites.
Fuentes:
https://www.shutterstock.com/es/image-vector/cute-cartoon-fox-flowers-on-striped-1616412958
https://www.shutterstock.com/ru/image-vector/cute-cartoon-fox-on-blue-background-407649844?src=Nqw7qmpqifrkdcK_qSXcqQ-3-30
Esta publicación la traduje usando DeepL, editada con etiquetas HTLM, y las fotos editadas con Pic Collage y capturadas con mi Blu G5.
Me despido esperando te guste mi tutorial y deseando me leas en la próxima publicación. Gracias por tu visita, apoyo y si fué de tu agrado, me encantará ver tu comentario.
Saludos.
English
Buenas tardes mis queridos amigos, espero y deseo que disfruten este fin de semana largo y puedan pasarla bien junto a su familia.
Y si quieres aprender, entonces esta es tu oportunidad.
Como algunos amigos saben, me encantan las manualidades y si es primera vez que entras a mi blog, bueno ahora lo sabes jajajaja... y hacer cajas es una de las manualidades que siempre realizo.
Así que te invito a que me acompañes a ver como la hago, prometo que te va a gustar y vas a aprender.
Los materiales que vas a necesitar son:
| Cartulina corrugada y doble faz | Recortes de Foami |
|---|---|
| Cartulina escolar blanca | Pinturas y pinceles |
| Wooden stick | Scissors |
| Liquid Silicone | Recycled cardboard |
| Pencil | Electric iron |
Have you located the materials yet?
Then let's get started:
Step 1:
Base of the Box.
Draw, cut out and assemble:
- The first thing you will do is draw on the double sided cardboard a circumference of the size you need, it can be with a compass, plate cover, etc. then cut out 1.5 or 2 cm larger (tab).
- Pass the tip of the scissors along the outline of the circumference, and cut out triangles so that when folded upwards they do not stick to each other.
- Measure the contour of the circumference and draw on the corrugated cardboard a strip with those measurements and you will increase the length by 2 or 3 cm and put the height you want, cut and then apply silicone on one edge, glue to the base, close the strip until it dries well.
Step 2:
Lid of the box.
Draw, cut out and assemble:
- Place the base we just made on the cardboard and mark all around the edge, and increase 1 or 2 millimeters so you don't get a tight fit on the lid and increase 1.5 cms of flange and then repeat the same procedure you did in step 1. (Oh and I forgot, before closing the strip of the lid, put the lid on the box and finish gluing the strip so you don't have a problem when placing the lid) and to finish off the base and the lid, cut and glue a 2 or 2.5cm strip of cardboard to cover the flange that is left inside.
Step 3:
- I made step 1 and 2 in miniature so that you can see the procedure well and here I show you the result of the elaborated box.
Step 4:
Foami figures:
- Outline the drawing with a soft lead pencil, start transferring the pieces to the foami placing the drawing outlined on the foami and rub with the ears of the scissors, each piece of the figure in the corresponding color and cut out, remember that there are pieces that you will cut flush, (nose and white part of the tail) these are the ones that will go on top, and those that go below you must leave a border.
In a next tutorial I will explain this step by step to my friends who do not know how to work with foami.
Step 5:
Now fill in the white part of the eyes first, let it dry and then paint the iris.
Then dip the angled brush in water, pass through a cloth and remove the excess water leaving it wet, and dip the tip of the brush in cinnamon paint and begin to pass through the lines of the drawing, first pass through the longest ones, let dry and then through the short ones.
Wash the brush and repeat the procedure with each color, to give more depth, pass with dark brown, and then paint with the round part of the brush the paw prints and let dry.
Now apply silicone on the mustache and start gluing the head together.
Step 6:
- Outline the eyes and paint eyelashes and mouth with a fine tip marker or brush, glue the nose and paint light spots on the eyes.
- Glue the pieces together and assemble the figure, then apply silicone on the back and glue to the white cardboard with a little pressure.
- Cut out all around the figure leaving 2 or 3 millimeters of border.
**This is how the main figure is finished to place in the box.
- Now cut out and paint tropical leaves of different models.
Step 7:
- We continue... draw or mark on the foami flowers, cut out and make a hole in the center with a wooden stick.
- With a piece of foami, cut out and make pistils and insert them into the flowers.
- Now cut out a small rectangle of cardboard box and roll it to give it the shape of a trunk, apply silicone, glue and let it dry.
- To cover the tips, apply silicone, glue to a small piece of cardboard and cut out.
- Apply dark brown paint and then shade with beige, resembling wood, and let dry.
Step 8:
- Insert 2 wooden sticks in each side of the figure and mark on the trunk to make the holes with something sharp.
- Apply silicone to the sticks and insert into the holes, then apply silicone to the base of the log and glue in the center of the box lid.
- Start decorating by gluing the leaves and flowers in a harmonious way, trying not to cover the main figure.
Step 9:
- When you finish decorating with the flowers and leaves, cut a 1/2 cm strip and glue it to the base of the box right on the edge of the lid, you will see that it will give a very nice touch to this box.
This is how this cute box is finished, you can use it as a gift box, cotillion, for bows, whatever you need it for.
Sources:
https://www.shutterstock.com/es/image-vector/cute-cartoon-fox-flowers-on-striped-1616412958
https://www.shutterstock.com/ru/image-vector/cute-cartoon-fox-on-blue-background-407649844?src=Nqw7qmpqifrkdcK_qSXcqQ-3-30
This publication was translated using DeepL, edited with HTLM tags, and the photos were edited with Pic Collage and captured with my Blu G5.
I say goodbye hoping you like my tutorial and looking forward to reading my next post. Thanks for your visit, support and if you liked it, I will love to see your comment.
Greetings.