Hola queridos amigos.
Nuevamente feliz de estar compartiendo con ustedes en esta linda noche.
Hoy les mostraré un paso a paso fácil de hacer, es una linda Tarjeta de Navidad, hecha con cartulinas, foami y escarcha tiene forma de Bambalina, la puedes regalar a alguien con un lindo mensaje, también puedes colgar para decorar el arbolito o mejor, da el uso que prefieras.
Ahora te invito a buscar los materiales para hacerla.
| Cartulina escolar roja y blanca | Foami escarchado |
|---|---|
| Escarcha | Pintura y pinceles |
| Pega blanca y silicón | Tijeras |
| Lápiz | Papel carbón |
| Lápiz | Dibujo o impresión |
Comenzamos el Procedimiento:
Verás que es muy fácil!
- Primero recorta el dibujo o impresión, transfiere a la cartulina (2 piezas rojas) y recorta.
- Luego marca dos piezas pero, en cartulina blanca y coloca una de las piezas de la bambalina y recorta con tijera de ondas dejando un borde de 3 o 4 milímetros.
-Ahora sobre una de las piezas blancas coloca el papel carbón, el molde y remarca el escrito y comienza a pintar con color rojo las letras.
- Termina de pintar el escrito y deja secar.
- Aparte repite igual procedimiento para transferir el dibujo del frente de la tarjeta (1 pieza roja).
- Ahora con la ayuda de un pincel delgado, aplica pega blanca en una pequeña zona del dibujo y con la pega húmeda comienza a rociar la escarcha, y así continúas hasta que todo el dibujo esté recubierto de escarcha y deja secar.
Nota: Si al retirar la escarcha queda algún espacio sin cubrir, deja secar y luego aplica pega y vuelve a rociar escarcha.
- Listas y pegadas las cuatro piezas, ahora haz el molde de un lazo, recorta un rectángulo aproximado de 15 cms de largo por 5 de ancho, dobla a la mitad y traza una guía.
- Dobla un extremo hacia adentro y dibuja en forma de v dejando en el centro un espacio aproximado de 1cm y recorta en ambos lados (ver fotos).
- Luego marca esta pieza (lazo) en foami escarchado, recorta y pega en el medio.
- Aplica silicón en la punta superior de la bambalina y pega una tirita de foami o si prefieres cinta o hilo dorado y pega la pieza blanca sin el escrito y deja secar.
- Luego aplica nuevamente silicón y pega la pieza con el escrito.
- Aparte recorta las colitas del lazo y da forma calentando con la plancha eléctrica.
_ Solo queda pegar el lazo y quedará terminada esta linda Tarjeta con forma de Bambalina.
Lista para que plasmes tus buenos deseos en esta Navidad.
Mi publicación está traducida con DeepL, editada con etiqueta HTML y las fotos tomadas por mi, con un teléfono Blu G5 y editadas con Pic Collage.
Espero que sea de tu agrado este lindo tutorial hecho con mucho cariño para tí y me despido no sin antes agradecerte la visita, apoyo y comentario.
Hasta mañana.
English:
Hello dear friends.
Again happy to be sharing with you on this beautiful evening.
Today I will show you a step by step easy to make, it is a cute Christmas Card, made with cardboard, foami and frosting is shaped Bambalina, you can give it to someone with a nice message, you can also hang to decorate the tree or better, give the use you prefer...
Now I invite you to look for the materials to make it.
| Red and white school cardboard | Frosted Foami |
|---|---|
| Frosted frosting | Paint and brushes |
| White glue and silicone | Scissors |
| Pencil | Charcoal paper |
| Drawing or print |
Let's start the Procedure:
You will see how easy it is!
- First cut out the drawing or print, transfer to cardstock (2 red pieces) and cut out.
- Then mark two pieces but, on white cardboard and place one of the pieces of the scenery and cut with wave scissors leaving a border of 3 or 4 millimeters.
-Now on one of the white pieces place the carbon paper, the mold and mark the writing and start painting the letters with red color.
- Finish painting the writing and let it dry.
- Repeat the same procedure to transfer the drawing on the front of the card (1 red piece).
- Now with the help of a thin brush, apply white glue on a small area of the drawing and with the wet glue start spraying the frosting, and so continue until the whole drawing is covered with frosting and let it dry.
Note: If when removing the frosting there is any space left uncovered, let it dry and then apply glue and sprinkle frosting again.
- Ready and glued the four pieces, now make the mold of a bow, cut a rectangle approximately 15 cm long by 5 cm wide, fold in half and draw a guide.
- Fold one end inward and draw a v-shape, leaving a space of approximately 1 cm in the center and cut out both sides (see photos).
- Then mark this piece (bow) in frosted foami, cut out and glue in the middle.
- Apply silicone on the upper end of the bamboo and glue a strip of foami or if you prefer gold ribbon or thread and glue the white piece without the writing and let it dry.
- Then apply silicone again and glue the piece with the writing.
- Cut out the tails of the ribbon and shape it by heating with an electric iron.
All you have to do is glue the ribbon and this cute Bambalina card will be finished.
Ready for you to express your good wishes this Christmas.
My publication is translated with DeepL, edited with HTML tag and the photos taken by me, with a Blu G5 phone and edited with Pic Collage.
I hope you like this nice tutorial made with love for you and I say goodbye before thanking you for your visit, support and comment.
See you tomorrow.