Es muy placentero poner la creatividad en marcha y más cuando hacemos cosas simples pero funcionales con nuestras propias manos, se acercan las clases y las lista de útiles absorben gran parte del presupuesto en casa. Entonces si podemos crear algunos útiles escolares fáciles y reproducirlos en docenas para darle a los niños que no tienen, será mucho más genial.
Mi proyecto creativo de hoy es un compás escolar hecho en madera, hace tiempo hice un prototipo pero no me sirvió para círculos pequeños, estuve buscando en la web algo fácil que no me quitara mucho tiempo para hacer varios durante los días libres, me agrada que observes el siguiente paso a paso...
My creative project today is a school compass made of wood, a while ago I made a prototype but it didn't work for small circles, I was looking on the web for something easy that wouldn't take up a lot of my time to make several during my free days, I like that Watch the following step by step...
1 PASO
Éste compás escolar consta de dos partes o brazos, la primera es realizar el brazo o soporte del lápiz que marcará las circunferencias, para ésto tomé un recorte de un palo de escoba y le hice un orificio del diámetro de un lápiz ✏️, luego con el cúter y el dremel le di forma de un clavo con cabeza.
Sus medidas son de 5 centímetros de diámetro la cabeza y el cuerpo del soporte de 1.5 centímetros.
1 STEP
This school compass consists of two parts or arms, the first is to make the arm or support of the pencil that will mark the circumferences, for this I took a cutout of a broomstick and made a hole the diameter of a pencil ✏️, then with the cutter and the dremel I shaped it into a nail with a head.
Its measurements are 5 centimeters in diameter, the head and the body of the support 1.5 centimeters.
PASO 2
La segunda parte consiste en elaborar la el brazo que contiene la puya filosa que se incrusta en el papel o elemento donde se va a trazar la escritura diametral.
La siguiente imagen muestra la forma en la que se realizó éste brazo, con la ayuda de un cúter, el dremel y lijas números 120 y 240 le di un acabado más prolijo.
STEP 2
The second part consists of making the arm that contains the sharp spike that is embedded in the paper or element where the diametric writing is going to be drawn.
The following image shows the way in which this arm was made, with the help of a cutter, the dremel and sandpaper numbers 120 and 240 I gave it a neater finish.
PASO 3
En éste paso le hice un diseño redondo con una fresa y el dremel a la cabeza del soporte del lápiz en la parte superior, seguidamente le coloque un clavo delgado en la punta inferior del brazo para anclar el compás a la hora de girar para hacer las circunferencias.
STEP 3
In this step I made a round design with a milling cutter and the dremel to the head of the pencil holder at the top, then I placed a thin nail on the lower tip of the arm to anchor the compass when turning to make the circumferences.
MATERIALES
✓ Madera
✓ palo de escoba
✓ lijas
✓ sierra manual
✓ dremel
✓ clavo
✓ taladro
✓ lapiz
✓ cuter
✓ escuadra
✓ regla
MATERIALS
✓ Wood
✓ broomstick
✓ sandpaper
✓ manual saw
✓ dremel
✓ clove
✓ drill
✓ pencil
✓ cutter
✓ square
✓ rule
Fotografías finales/ final photographs
Espero les haya gustado y muchas gracias por visitar ésta publicación, nos vemos en los comentarios o en la próxima entrada. Éxitos!
I hope you liked it and thank you very much for visiting this publication, see you in the comments or in the next entry. Successes!
Todas las fotos son de mi propiedad, tomadas con la cámara de mi teléfono 📱 Bison 11 .
Traductor utilizado: Google Traductor.
Los gif fueron editados con la app Creador y editor de GiF
Las imágenes fueron comprimidas con la app photo compresor.
Duración aproximada de trabajo: 2:00 horas
All photos are my property, taken with my phone camera 📱 Bison 11 .
Translator used: Google Translator.
The gifs were edited with the GiF Creator and Editor app
The images were compressed with the photo compressor app.
Approximate duration of work: 2:00 hours