Greetings to all, fellow craft lovers. You may remember that relatively recently, in one of the editions of HiveDIY Magazine, I showed you briefly how to make small corn cobs with plasticine.
Well, thinking of a way to expand that tutorial a bit, I got to work and made a Señor Avocado.
Español
Saludos a todos, compañeros amantes de las manualidades. Quizás recuerden que hace relativamente poco, en una de las ediciones de HiveDIY Magazine, les enseñé de manera breve cómo hacer pequeñas mazorcas de maíz con plastilina.
Pues bien, pensando en una manera de expandir un poco dicho tutorial, puse manos a la obra e hice un Señor Aguacate.
I would like to share with you the step by step of this figure, so join me!
Step by step
The materials used for this sculpture were as follows:
Wire
Cardboard
Glue
Paper
Plasticine
I used the wire to create the support for the hands and feet of the figure. The cardboard to make the base shape of the character.
Me gustaría compartir con ustedes el paso a paso de esta figura, ¡así que acompáñenme!
Paso a paso
Los materiales utilizados para esta escultura fueron los siguientes:
Alambre
Cartulina
Pegamento
Papel
Plastilina
El alambre lo usé para crear el soporte para manos y pies de la figura. La cartulina para hacer la forma base del personaje.
I glued all these pieces together, creating a cardboard base for the avocado's feet; I also crumpled up some paper and placed it on the back of the base to give volume to the skeleton and not use too much plasticine, which would make the figure heavier.
Todas estas piezas las uní con pegamento, creando una base de cartulina en los pies del aguacate; además, arrugué papel y lo coloqué en la parte trasera de la base para dar volumen al esqueleto y no usar demasiada plastilina, la cual haría que la figura fuese más pesada.
That was the base shape I used for the figure; on the other hand, the colors of plasticine I used were the same as a normal avocado would have, green and yellow (mixed with some green).
Below you can see the skeleton of the figure and the two colors of plasticine to use.
Esa fue la forma base que utilicé para la figura; por otra parte, los colores de plastilina que usé fueron los mismos que tendría un aguacate normal, verde y amarillo (mezclado con algo de verde).
Abajo pueden ver el esqueleto de la figura y los dos colores de plastilina a utilizar.
Well, the first thing I did was to place the yellow on the front of the avocado, which would be the face of our friendly character. I didn't use too much clay for this area, but I did try to spread it out as best I could so that there was a thin layer of clay on the front.
Bien, lo primero que hice fue colocar el amarillo en la parte frontal del aguacate, que vendría a ser la cara de nuestro simpático personaje. No usé demasiada plastilina para esta área, pero sí traté de extenderla lo mejor que pude para que quedase una delgada capa de plastilina al frente.
The other color I started to include in the border of the yellow areas. First I made a long strip of green plasticine and then I spread it all around the yellow color.
El otro color lo empecé a incluir en el borde de las áreas amarillas. Primero hice una larga tira de plastilina verde y luego la extendí por todo el alrededor del color amarillo.
The back of the avocado was green, so this would be the color I would use to cover the rest of the character's body. I used the plasticine to cover the whole area without following any pattern, I would just smooth the surface once it was completely covered by the material.
La parte trasera del aguacate era verde, así que este sería el color que usaría para cubrir el resto del cuerpo del personaje. Usé la plastilina para cubrir toda el área sin seguir ningún patrón, solo alisaría la superficie una vez que esta estuviese completamente cubierta por el material.
After finishing smoothing the green surface, I made small cylinders of black plasticine to cover the wire that serves as support for the arms and legs.
Después de terminar de alisar la superficie verde, hice pequeños cilindros de plastilina de color negro para cubrir el alambre que sirve como soporte en brazos y piernas.
Precisely, for the hands I used a white plasticine. The hands of the character were quite simple to make. Each one had the same shape of the gloves of the old cartoons, giving a cartoonish look to the character.
Precisamente, para las manos usé una plastilina blanca. Las manos del personaje eran bastante sencillas de hacer. Cada uno tenía la misma forma de los guantes de las antiguas caricaturas, dando una apariencia caricaturesca al personaje.
To simulate the avocado seed, I took a piece of brown plasticine and made a heart. I placed this heart in the center of the front area of the avocado.
Para simular la semilla del aguacate, tomé un trozo de plastilina marrón e hice un corazón. Este corazón lo coloqué en el centro del área frontal del aguacate.
For the face I started with the mouth. I placed it just above the heart-shaped seed. I made it thin and smiling, something that goes very well with this charming character.
Then I placed the eyes using two small black plasticine spheres, with two slightly smaller white dots.
Para el rostro comencé por la boca. La coloqué justo por encima de la semilla con forma de corazón. La hice delgada y sonriente, algo que va mu bien con este encantador personaje.
Después le coloqué los ojos usando dos pequeñas esferas de plastilina negra, con dos puntos blancos un poco más pequeños.
To differentiate it a bit from Mrs. Avocado, a sculpture I will show you later, I made a small blue bow on top of the heart-shaped seed, something that might resemble the bow of a bow tie.
Para diferenciarlo un poco de la Señora Aguacate, una escultura que les mostraré más adelante, le hice un pequeño moño de color azul encima de la semilla con forma de corazón, algo que podría asemejarse al moño de un corbatín.
Another accessory that would serve to identify Mr. Avocado would be his hat, which I made with a thin circumference of plasticine. Below you can see the shapes and pieces I made to create the hat.
Otro accesorio que serviría para identificar al Señor Aguacate sería su sombrero, el cual hice con una circunferencia delgada de plastilina. Abajo pueden ver las formas y piezas que hice hasta crear el sombrero.
Finally I added the last detail to the sculpture, a pair of shoes at the base of the legs. Below you can see how she looks with her new shoes.
Finalmente le coloqué el último detalle a la escultura, un par de zapatos en la base de las piernas. Abajo pueden ver cómo quedó con sus zapatos nuevos.
Well, this is how the sculpture of Mr. Avocado was finished.
This is quite a charming and interesting piece. Here are some pictures of the final result:
Bien, de esta manera quedó terminada la escultura del Señor aguacate.
Esta es una pieza bastante encantadora e interesante. A continuación dejo fotografías del resultado final:
And that's all for now. I sincerely hope you liked my sculpture. I invite you to leave your opinions below in the comments, as always I will be happy to read them.
I appreciate very much that you took the time to read me. With nothing more to add, I'll say goodbye then...
See you next time!
Y esto ha sido todo por ahora. Espero de corazón que mi escultura les haya gustado. Los invito a dejar sus opiniones abajo en los comentarios, como siempre estaré encantado de leerlos.
Agradezco mucho que se tomaran el tiempo de leerme. Sin más que agregar, me despido entonces...
¡Hasta la próxima!