English
Friends, nice to be with you again!
This time I bring you a very useful project, it is a pen decorated with some beads that I use in jewelry, that is this art applied to a pen, because it usually happens especially in workplaces where pens are confused and even lost.
In that sense with this project what I want is that you have a nice pencil and you can also identify it among many others, in my case I always try to make my things something different, because being a teacher, school supplies are often confused with those of other colleagues, especially if we meet to do work together so that by having your things well differentiated you will not have major problems or confusion with the material of each.
For this project I used only a few elements, I will detail them below:
- 60 cm of 24 gauge bijouterie wire.
- 1 mother-of-pearl butterfly
- 1 small leaf of mother-of-pearl
- 1 blue cube
- 2 little spheres
- 1 cat's eye heart
- 1 heart
Procedure
The first thing we must take into account is the pen cap, we must place it in the opposite direction, that is to say in such a way that we position it as if we were going to use the pen, this to have an idea of from which space we are going to start working, since the cap can be used and not lose it.
That said, we place the lid and verify where we start from.
I use to work with the wire directly from the coil, so I must introduce the beads before starting the work and in the order in which I want them to be, now if you work with the 60 cm of wire you can coil the wire first and then introduce the beads.
After inserting the beads, I put the butterfly last, which is the one I want to leave at the top, then I roll the wire over the pencil, fixing it very well and leaving a 5 cm border.
Then I place the butterfly, fixing it well, turning the wire under it.
Then I place the rest of the beads.
On the last bead, I roll but pass the wire over the turns of wire so that it is fixed to the pencil.
At this point I will cut the wire leaving a wire surplus of about 5 cm approximately, with the round nose pliers I will make a spiral to decorate and not leave sharp points exposed that can hurt us.
I do the same with the other end.
And this is how my cute decorated pen looks like.
I hope you liked this project and I hope you find it useful so that you don't confuse your pen anymore and also give a touch of color and dynamism to your work items.
Thanks for reading me!
Photos by
Translated with www.DeepL.com/Translator (free version)
Español
Amigos un gusto estar de nuevo con ustedes!
En esta oportunidad les traigo un proyecto bastante útil, se trata de un bolígrafo decorado con algunas cuentas de las que uso en bisutería, es decir se trata de este arte aplicado a un lapicero, en vista de que suele pasar sobre todo en lugares de trabajo en donde los bolígrafos se confunden e incluso se pierden.
En tal sentido con este proyecto lo que se quiere es que tengas un lindo lápiz y que ademas puedas identificarlo entre otros muchos, en mi caso siempre trato de hacer de mis cosas algo diferente, porque siendo docente, los útiles escolares se suelen confundir con los de otras compañeras, sobre todo si nos reunimos para hacer trabajos juntas de forma que al tener tus cosas bien diferenciadas no tendrás mayores problemas ni confusiones con el material de cada una.
Para este proyecto use pocos elementos a continuación se los detallare:
- 60 cm de alambre de bisutería cal 24
- 1 mariposa de nácar
- 1 hojita de nácar
- 1 cubo azul
- 2 esferitas
- 1 corazón de ojo de gato
- 1 corazón
Procedimiento
Lo primero que debemos tomar en cuenta es la tapa del bolígrafo, la misma debemos colocarla en el sentido contrario, es decir de manera que la posicionemos como si fuésemos a usar el bolígrafo, esto para tener idea de a partir de que espacio vamos a comenzar a trabajar, puesto que la tapa pueda ser usada y no perder la misma.
Dicho esto, colocamos la tapa y verificamos a partir de donde comenzamos.
Yo acostumbro a trabajar con el alambre directo del rollo, por lo que debo introducir las cuentas antes de iniciar el trabajo y en el orden en el que quiero que queden, ahora bien si usted trabaja con los 60 cm de alambre puede enrollar primero el alambre y luego introduce las cuentas.
Después de introducir las cuentas, dejo de ultimo la mariposa que es la que quiero dejar en la parte superior, luego enrollo el alambre sobre el lápiz, fijándolo muy bien y dejando un borde de 5 cm.
Luego posiciono la mariposa, fijándola bien, girando el alambre por debajo de la misma.
Seguidamente coloco el resto de las cuentas.
En la ultima cuenta, enrollo pero paso el alambre sobre las vueltas de alambre esto con el fin de que quede fija al lápiz.
Para ese momento cortare el alambre dejando un excedente de alambre de unos 5 cm aproximadamente, con la pinza de punta redondo haré un espiral para que decore y no queden puntas filosas al descubierto que nos puedan hacer daño.
Realizo lo mismo con el otro extremo.
Y así es como queda mi lindo bolígrafo decorado.
Espero les haya gustado este proyecto y les sea útil para que no confunda mas su bolígrafo y ademas le de un toque de color y dinamismo a sus artículos de trabajo.