¡Bienvenidos una vez más a mi blog, queridos amigos que forman parte de esta hermosa comunidad como #hivediy y a todos los que compartimos casi siempre nuestros trabajos hecho a manos. Es un deleite y pasión hacerlos.Espero que les guste. Dios les bendiga.
El día de hoy quiero mostrar como elaborar una hermosa pulsera de hilo chino , piedras preciosas, aros chatos con brillantes por los bordes y mostacillas.
Esta pulsera es especial para llevarla en cualquiera ocasión, cuando sea luce bonita y muy coqueta, además de estar a la moda, las jóvenes siempre la eligen por su belleza.
La regalaré a mi tía Lila ,le gustan esas pulseras y mi tía siempre se conserva bien linda. Por lo tanto la escogí para obsequiarle este lindo presente y tambien por que se aproxima su cumpleaños.
Los materiales para la elaboración de la pulsera ,son los siguientes:
- 9 piedras preciosas en forma de rombo, color anaranjada.
- 2 mostacillas grande de dos colores: marrón y beige.
- 15 aros chatos palteados con brillante por los bordes.
- 2 palitos para adorno color plateado.
- 1 metro de hilo chino de color negro.
- Tijera.
- Yesquero.
- Regla.
Paso a paso para la realización de la hermosa pulsera de hilo chino y piedras preciosas:
Primer paso:
- Con una regla medimos 40 centímetros , que será el largo de la pulsera.
- Luego con el yesquero quemamos las puntas para que se facilite cuando vayamos a introducir por el hilo las piedras.
- Colocamos la primera piedra , que es la mostacilla marrón con beige,dentro del hilo chino , dejando 12 centímetros desde la punta del hilo.Donde comienzan los 12 centímetros hacer varios nudos sencillos.Esto es para que no se ruede la mostacilla.
Segundo paso:
- Después de haber introducido dentro del hilo la mostacilla, introducimos un aro chato, luego la piedra en forma de rombo color anaranjada , otro aro chato y el accesorio en forma de palo plateado .
- Aquí tenemos la primera parte de la pulsera.
Tercer paso:
- Seguidamente introducimos por el hilo chino negro otro aro chato, una piedra anaranjada , un aro chato, ahora hacemos varios nudos sencillos.
Cuarto paso:
- Luego introducimos otro aro , una piedra , un aro, hacemos nuevamente varios nudos sencillos, un aro, una piedra , un aro, una piedra, un aro , ahora corresponde colocar el accesorio en forma de palo plateado.
- Para completar la pulsera introducir una aro, una piedra anaranjada , un aro y por último una mostacilla marrón con beige.
Quinto paso:
- Solo faltan introducir las piedras y los accesorios que van en la parte de abajo.
- En cada punta introducir un aro, una piedra y un aro, Hacer un nudo .
- Ahora para realizar el nudo corredizo que va en la parte de abajo, que va a permitir que la pulsera abra y cierre.
- Tomamos un pedazo de hilo chino negro de 20 centímetros,
- colocamos las puntas de la pulsera a cada lado , ponemos en el medio el pedazo de hilo para hacer 4 nudos planos.
sexto paso:
Los nudos planos se hacen de la siguientes maneras: colocar el hilo por la mitad , el hilo de la derecha pasarlo por sobre el hilo central y el de la izquierda pasarlo sobre el hilo de la derecha y ese hilo meterlo dentro del hueco que forma el hilo derecho y sacarlo por arriba, así realizamos el nudo plano, pero primero tomamos el derecho y luego el izquierdo, en total hacemos 4 nudos planos.
- Teniendo todas las piedras y los accesorios dentro del hilo chino procedemos a recortar los excedentes y quemar con el yesquero las puntas.
Aquí el resultado final de la linda pulsera en hilo chino con piedras preciosas.
Espero que les guste , gracias por su apoyo , hasta la próxima , muchas bendiciones.
Las fotos son mías tomadas con teléfono Infinix,editadas con incollage y traducidas con DEEPL.
ESPAÑOL
Welcome once again to my blog, dear friends who are part of this beautiful community as #hivediy and to all of us who share almost always our handmade works. It is a delight and passion to make them, I hope you like them. God bless you.
Today I want to show you how to make a beautiful bracelet of Chinese thread, precious stones, flat rings with rhinestones around the edges and beads.
This bracelet is special to wear on any occasion, whenever it looks pretty and very flirtatious, besides being fashionable, young girls always choose it for its beauty.
I will give it to my aunt Lila, she likes these bracelets and my aunt always looks very pretty. So I chose her to give her this nice present and also because her birthday is coming up.
The materials for the elaboration of the bracelet ,are the following:
- 9 rhombus-shaped gemstones, orange color.
- 2 big beads in two colors: brown and beige.
- 15 flat earrings with shiny edges.
- 2 sticks for silver-colored ornaments.
- 1 meter of black Chinese thread.
- Scissors.
- Tinder.
- Ruler.
Step by step for the realization of the beautiful bracelet of Chinese thread and precious stones:
First step:.
- With a ruler we measure 40 centimeters , which will be the length of the bracelet.
- Then with the tinder we burn the tips to make it easier when we are going to introduce the stones through the thread.
- We place the first stone, which is the brown and beige beads, inside the Chinese thread, leaving 12 centimeters from the tip of the thread.where the 12 centimeters begin to make several simple knots.this is so that the beads do not roll.
Second step:
- After inserting the bead into the thread, we insert a flat ring, then the orange diamond-shaped stone, another flat ring and the silver stick accessory.
- Here we have the first part of the bracelet.
Third step:
- Next we introduce through the black Chinese thread another flat ring, an orange stone, a flat ring, now we make several simple knots.
Fourth step:
- Then we introduce another hoop, a stone, a hoop, we again make several simple knots, a hoop, a stone, a hoop, a stone, a hoop, now it is time to place the accessory in the form of silver stick.
- To complete the bracelet insert a hoop, an orange stone, a hoop and finally a brown beige bead.
Fifth step:
- All that remains is to insert the stones and the accessories that go on the bottom.
- On each end insert a ring, a stone and a ring, make a knot.
- Now to make the slip knot that goes at the bottom, which will allow the bracelet to open and close.
- We take a piece of black Chinese thread of 20 centimeters,
- place the ends of the bracelet on each side, put in the middle the piece of thread to make 4 flat knots.
sixth step:
The flat knots are made in the following ways: place the thread in half, the thread on the right pass it over the central thread and the thread on the left pass it over the thread on the right and that thread put it inside the hole formed by the right thread and remove it from above, so we make the flat knot, but first we take the right and then the left, in total we make 4 flat knots.
- Having all the stones and accessories inside the Chinese thread we proceed to trim the excess and burn with the tinder the tips.
Here the final result of the pretty bracelet in Chinese thread with precious stones.
I hope you like it , thanks for your support , until next time , many blessings.
The photos are mine taken with Infinix phone,edited with incollage and translated with DEEPL.