Hello my dear readers, I hope you are well and that you have or have had an excellent and wonderful day.
In my previous posts, I have given you some decorating ideas for every corner of the house and refrigerators are one of those things you can not forget to decorate. So here I want to share with you, how to make some ornaments ideal to place on the fridge or also serve to give them as a gift to someone, paste them on a wall, on a door, the truth is that there are many places where you can place them.
STEP BY STEP:
I will start by cutting out of cardboard, two circles of approximately 15 cm in diameter. In one of the circles I will open a hole in the center of approximately 3 cm in diameter.
I am going to make the Grinch first and for this I will take the circle that is complete. As I have strips of green fabric (remember to make the most of any recycled material), I will glue them horizontally to line the entire circle, as shown in the image.
With the cardboard I will cut out a circle of 4 cm in diameter which I will cut in half and with them I will make the eyes.
Once I have cut the circle in half, I will line them with the yellow fabric. I will take the opportunity to cut in the black fabric, a circle of about 1.5 cm, and two strips of 1 x 4 cm to make the tabs and I will make some cuts on one side of the strip as shown in the image. I also cut two small circles in red fabric of 1 cm and a long strip in black fabric about 5 mm wide.
Once all the pieces are cut out, I proceed to place each one in its place, as you can see in the image.
I already have my face ready and I just have to decorate it with a Christmas hat, I made it with a strip of cardboard of 7 x 1.5 cm approximately, which I will line with white fabric. And then I will glue it to a cone that I cut out of red fabric, as you can see in the image.
I will cut a long strip of white fabric of 4 x 20 cm and I will make some cuts as if they were bangs. Then I will make a fold at the tip of the hat and I will glue the white strip at the tip.
Once everything is finished, I will put some silicone on the tassel of the hat and glue it to the white strip, so it will be fixed and will not fall off completely. And now I have my Grinch ready!
I will now work on the other circle, so I will take a red strip and glue it all around the circle making folds as shown in the image.
Now with the black fabric, I will cut a strip of 3 x 20 cm and a square in yellow fabric of 3 x 3 cm, to this I will cut a square in the center 2 x 2 cm.
I will glue the black strip in the center so that it looks like a belt and I will glue in the center of the black strip the yellow square that will be the buckle.
I will make another Christmas hat with the same procedure as the previous one. Then I will glue it as shown in the picture and I have my Santa wreath ready.
Now that I have everything finished, I glued a magnet on the back so that it can be attached to any metal surface. Remember that if you make it, you can use it as you like, you can even put a thread on it and hang it on the Christmas tree. The important thing is to decorate and let your imagination fly.
I hope you liked it. I say goodbye as always, but not before thanking you for dedicating a little of your valuable time to me. I hope to see you in my next publication, be good and take care of yourselves.
Original creation content:
馃尣 All photos are my own taken and edited with my Alcatel cell phone.
馃巺 The cover image was made with Canva application and edited by me.
馃尣 The divider images were taken from the Canva page and edited by me in Paint.
馃巺 The English translation was done with the help of DeepL.
馃尣 The letters indicating the languages were taken from the Cooltext page.
Hola mis queridos lectores, espero que se encuentren bien y que tengan o hayan tenido un excelente y maravilloso d铆a.
En mis publicaciones anteriores, les he dado algunas ideas de decoraci贸n para cada rinc贸n de la casa y las neveras son unas de esas cosas que no se pueden olvidar decorar. As铆 que aqu铆 les quiero compartir, como realice unos adornos ideal para colocar en la nevera o tambi茅n les servir谩 para obsequi谩rselos a alguien, pegarlos en una pared, en una puerta, la verdad es que son muchos los lugares donde se puede colocar.
PASO A PASO:
Empezare recortando en cart贸n, dos c铆rculos de aproximadamente 15 cm de di谩metro. A uno de los c铆rculos le abrir茅 un hueco en el centro de aproximadamente 3 cm de di谩metro,
Voy a realizar el Grinch primero y para ello tomar茅 el c铆rculo que es completo. Como lo que tengo son tiras de tela en color verde, (recuerden que hay que aprovechar al m谩ximo cualquier material reciclado), las pegare en horizontal para as铆 forrar todo el c铆rculo, tal como se muestra en la imagen.
Con el cart贸n recortare un circulo de 4 cm de di谩metro el cual cortare por la mitad y con ellos hare los ojos.
Una vez que haya cortado el circulo por la mitad, los forrare con la tela amarilla. Aprovechare para cortar en la tela negra, un circulo como de 1.5 cm, y dos tiras de 1 x 4 cm para hacer las pesta帽as y le hare unos cortes de un solo lada de la tira tal como se aprecia en la imagen. Tambi茅n recorte dos c铆rculos peque帽os en tela roja de 1 cm y una tira larga en tela negra como de 5 mm de ancho.
Ya con todas las piezas recortadas, procedo a colocarlas cada una en su lugar, tal como pueden apreciar en la imagen.
Ya tengo mi carita lista y solo me queda decorar con un gorro navide帽o, este lo realice con una tira de cart贸n de 7 x 1.5 cm aproximadamente, el cual forrare con la tela blanca. Y luego la pegare a un cono que recorte en tela roja, como pueden ver en la imagen.
Cortare una tira larga en tela blanca de 4 x 20 cm y hare unos cortes como si fueran unos flecos. Luego hare en la punta del gorro, un pliegue e ir茅 pegando la tira blanca en la punta.
Una vez finalizado todo, le colocare un poco de silic贸n en la borla del gorro y la pegare a la tira blanca, as铆 quedara fijo y no se caer谩 por completo. Y ya tengo mi Grinch listo!
Trabajare ahora en el otro circulo, as铆 que tomare una tira en color rojo y la pegare por todo el alrededor del circulo haciendo pliegues como se muestra en la imagen.
Ahora con la tela negra, recortare una tira de 3 x 20 cm y un cuadrado en tela de color amarillo de 3 x 3 cm, a este le recortare un cuadrado en el centro 2 x 2 cm.
La tira negra la pegare en el centro para que me quede como un cintur贸n y le pegare en el centro de la tira negra el cuadrado amarillo que ser谩 la hebilla.
Hare otro gorro navide帽o con el mismo procedimiento del anterior. Luego lo pegare tal como se muestra en la imagen y ya tengo listo mi corona de Santa.
Ahora si ya tengo todo terminado, le pegue por la parte de atr谩s un im谩n para que se pueda pegar a cualquier superficie de metal. Recuerden que si ustedes lo realizan le pueden dar el uso que mas les guste, hasta se le puede colocar un hilo y colgarlo en el 谩rbol de navidad. Lo importante es decorar y echar a volar la imaginaci贸n.
Espero que les haya gustado. Me despido como siempre, no sin antes agradecerles, por dedicarme un poquito de su valioso tiempo. Los espero en mi pr贸xima publicaci贸n, p贸rtense bien y cu铆dense mucho.
Contenido de creaci贸n original:
馃尣 Todas las fotos son de mi propiedad tomada y editadas con mi celular Alcatel.
馃巺 La imagen de portada fue realizada con la aplicaci贸n Canva y editada por mi.
馃尣 Las imagenes del separador fueron tomadas de la p谩gina Canva y editado por m铆 en Paint.
馃巺 La traducci贸n al idioma ingl茅s fue realizada con ayuda de DeepL.
馃尣 Las letras de indicaci贸n de los idiomas, fueron tomadas de la p谩gina Cooltext.