English Version
Materials
1 meter of cotton fabric
Model of the robe that we are going to trace
Scissors
Unpicker
White thread
Sewing needle no. 12
Conventional needle
Sewing machine
Pins
Recyclable sheet to make the collar pattern
Measuring tape.
Steps
The first step is to place the fabric to the thread, that is to say where the fabric stretches, there the width is located, then the fabric is folded in half to the size of the pattern that in this case is the robe that we want to replicate, pins are placed in order to hold the fabric so that it does not roll, we proceed to cut the front part.
Afterwards, the fabric is folded in two again just as we folded the model robe and the back part is cut leaving one centimeter more which will be the sewing centimeter.
Join the back of the fabric of the front and the back and sew the edges of the shoulders and each side of the robe with straight stitching and go over the seam again with zigzag stitching.
The desired length is taken, the hem is picked up and sewn with straight stitching and then in zigzag stitching.
To make the selvage of the neck and shoulders, take the sheet, measure the cut of the neck and shoulders and make the pattern with a width of 7 cm using the measuring tape. The fabric is cut following the pattern of both selvedges, the fabric is placed upside down and is manually basted using the needle to fix the fabric so that it does not roll, then the edges are reviewed with the sewing machine. Finally, the baste thread is removed with the thread trimmer to complete the project.
|
And so we have our design ready, ideal for sleeping as it is a comfortable and loose garment.
Well friends this is all for my part, see you in a next craft project in this nice community of Hive Diy, blessings to all.
All photographs are my property.
Photos edited in Canva
Canva text separator
Traslate in deepl
Version en Español
Buenos días, tardes o noche según sea tu zona horaria, espero se encuentren bien. En esta oportunidad quieros mostrarles el paso a paso de un proyecto de costura como lo es una bata de dormir, Este es un diseño muy cómodo y sencillo que todos podemos realizar fácilmente.
Para este lindo proyecto vamos a ocupar los siguientes materiales que a continuación te muestro.
Materiales
1 metro de Tela de algodón
Modelo de bata que vamos a calcar
Tijera
Desbaratador
Hilo blanco
Aguja de coser nro. 12
Aguja convencional
Máquina de coser
Alfileres
Hoja reciclable para realizar el patrón del cuello
Cinta métrica.
Pasos
El primer paso es colocar la tela al hilo, es decir donde estira la tela, allí se se ubica el ancho, luego se dobla la tela a la mitad a la medida del patrón que en este caso es la bata que queremos replicar, se le coloca alfileres con el fin sujetar la tela para que no se ruede, se procede a cortar la parte delantera.
Posteriormente se vuelve a doblar la tela en dos al igual que doblamos la bata modelo y se recorta la parte trasera dejando un centímetro más que será el centímetro de costura.
Se une el detrás de la tela de la parte delantera y la parte posterior y se cose las orillas de la parte de los hombros y cada lado de la bata con costura recta y se vuelve a repasar la costura con costura de zigzag.
Se toma el largo deseado, se coge el ruedo y se cose con costura recta y luego en costura de zigzag.
Para hacer el orillo del cuello y de los hombros se toma la hoja, se mide el corte del cuello y los hombros haciéndose el patrón con un ancho de 7 cm para ello usamos la cinta métrica. Se recorta la tela siguiendo el patrón de ambos orillos, se coloca la tela al revés y se bastea manualmente usando la aguja para fijar la tela y que no se ruede, posteriormente se repasa las orillas con la máquina de coser. Para finalizar se quita con el desbaratador el hilo basteado para así culminar el proyecto.
|
Y asi nos queda nuestro diseño listo, ideal para dormir ya que es una prenda cómoda y holgada.
Bueno amigos esto es todo por mi parte, nos vemos en un próximo proyecto de manualidad en esta linda comunidad de Hive Diy, bendiciones a todos.
Todas las fotografías son de mi propiedad.
Fotos editadas en Canva
Separador de texto en Canva
Traslación en deepl