¡Saludos abejitas creativas! | ¡Greetings creative bees!
Ya les había comentado en un post anterior que hace unos días fue el cumpleaños de mi amiga Génesis, por lo que para celebrar nos reunimos en su casa y organizamos una pequeña reunión, para decorar un poco elaboré un banderín para ella con su nombre y fue parte de su regalo, la verdad que quedó muy lindo y la combinación de colores me gustó mucho, sin duda es algo que tengo que compartir con ustedes y aquí se los traigo, sin más, ¡manos a la obra!
I had already told you in a previous post that a few days ago it was my friend Genesis's birthday, so to celebrate we met at her house and organized a small meeting, to decorate a little I made a pennant for her with her name and it was part of his gift, the truth is that it was very nice and I liked the color combination a lot, without a doubt it is something that I have to share with you and here I bring it to you, without further ado, let's get to work!
❥ Cartulina escolar rosada.
❥ Foami escarchado negro.
❥ Estambre negro.
❥ Tijera.
❥ Lápiz.
❥ Regla.
❥ Silicón caliente.
❥ Hoja de papel.
❥ Abre huecos.
❥ Pink school cardboard.
❥ Black frosted foami.
❥ Black yarn.
❥ Scissor.
❥ Pencil.
❥ Rule.
❥ Hot silicone.
❥ Sheet of paper.
❥ Opens holes.
❥ PASO 1. Lo primero que debemos hacer es seleccionar la frase que vamos a colocar en el banderín, en mi caso fue "HBD Génesis" , luego debemos elegir una fuente para las letras, yo suelo utilizar la página Dafont y de allí elegí la que más me gustó para esta manualidad, solo debemos escribir la frase en esa fuente y pasarla a la hoja de papel, lo cual será nuestro molde para trabajar, además de las letras también necesitamos un molde de la forma que queremos que tenga el banderín, hay muchas para escoger y a mí me gustó esta.
❥ STEP 1. The first thing we must do is select the phrase that we are going to place on the pennant, in my case it was "HBD Genesis" , then we must choose a font for the letters, I usually use the page Dafont and from there I chose the one that I liked the most for this craft, we only have to write the phrase in that font and transfer it to the sheet of paper, which It will be our mold to work with, in addition to the letters we also need a mold of the shape we want the pennant to have, there are many to choose from and I liked this one.
❥ PASO 2. Una vez que ya tengamos las letras en la hoja de papel procedemos a transferirlas al foami escarchado negro y recortamos cuidadosamente.
❥ STEP 2. Once we have the letters on the sheet of paper, we proceed to transfer them to the black frosted foami and carefully cut them out.
❥ PASO 3. Ahora debemos transferir a la cartulina escolar rosada la forma que elegimos para nuestro banderín, necesitaremos uno por cada letra, en mi caso serán 10, luego las recortamos.
❥ STEP 3. Now we must transfer the shape we chose for our pennant to the pink school cardboard, we will need one for each letter, in my case it will be 10, then we cut them out.
❥ PASO 4. Luego de tener todas las piezas les vamos a abrir un agujero en cada esquina superior con ayuda del abre huecos.
❥ STEP 4. After having all the pieces we are going to open a hole in each upper corner with the help of the hole punch.
❥ PASO 5. Aplicamos silicón caliente en la parte trasera de las letras y vamos pegando una a una sobre las piezas de cartulina rosada.
❥ STEP 5. We apply hot silicone on the back of the letters and stick them one by one on the pieces of pink cardboard.
❥ PASO 6. Por último, cortamos una tira de estambre negro que sea un poco más larga que el tamaño del banderín, en mi caso, lo dividiré en 2 partes , uno para HBD y otro para Génesis, así que recortaré 2 tiras de estambre, luego vamos a pasar una de las puntas por el primer agujero de la primera pieza de cartulina y la sacamos por el otro agujero, quedando la mayor parte del estambre en la parte trasera del banderín y de esta manera ya lo hemos armado por completo.
❥ STEP 6. Finally, we cut a strip of black yarn that is a little longer than the size of the pennant, in my case, I will divide it into 2 parts, one for HBD and one for Genesis, so I will cut 2 strips of yarn, then we are going to pass one of the ends through the first hole of the first piece of cardboard and take it out through the other hole, leaving most of the yarn on the back of the pennant and in this way we have already fully armed.
¡Y listo! Así de sencillo elaboré este lindo banderín de cumpleaños para mi amiga Génesis, con los colores que quería para decorar y aunque es simple queda muy bien, a los banderines también podemos agregarles detalles como coronas de foami, mariposas, corazones o lo que más nos guste y eso les da un toque más llamativo, espero que les haya gustado este pequeño tutorial y les sirva para elaborar sus banderines de cumpleaños en casa, nos vemos en un siguiente post con una nueva idea creativa.
¡And ready! So simple I made this cute birthday pennant for my friend Genesis, with the colors she wanted to decorate and although it is simple it looks great, we can also add details to the pennants such as foam crowns, butterflies, hearts or whatever we like the most and that gives them a more striking touch, I hope you liked this little tutorial and it helps you to make your birthday pennants at home, see you in a next post with a new creative idea.
Todas las fotografías son de mi propiedad.
Fotografías capturadas con mi Samsung Galaxy A12
Separador de texto elaborado en Canva.
Nos vemos en mi próxima publicación.
¡Tengan un feliz día!
All photographs are my property.
Photos captured with my Samsung Galaxy A12
Text separator made in Canva.
See you in my next post.
¡Have a happy day!