Saludos queridos amigos de la comunidad Hive Diy, sean bienvenidos a mi espacio de creatividad una vez más, espero se encuentren bien y que esta semana sea de buenas noticias para todos nosotros, y parece mentira pero ya casi que se termina el mes de Marzo. Hoy les quiero compartir unos lindos llaveritos que estuve realizando como pedidos.
Greetings, dear friends of the Hive DIY community! Welcome back to my creative space. I hope you're all doing well and that this week brings good news for everyone. It's hard to believe, but March is almost over! Today I want to share some cute keychains I've been making as custom orders.
Saben que una de las flores que me parece difícil de realizar es el tulipán, se requiere de paciencia y de práctica para obtener un bonito resultado, quiero que vean mi proceso con los tulipanes aquí los primeros que hice para Llavero los hice para mí, pero no aún no se veía tan bien para emprender, pero continúe practicando y descubriendo la técnica.
You know that one of the flowers I find difficult to make is the tulip. It requires patience and practice to get a nice result. I want you to see my process with the tulips. Here are the first ones I made for Keychain. I made them for myself, but they didn't look good enough to start a business yet, but I kept practicing and discovering the technique.
Algo que me llamó mucho la atención es que el resultado también va a depender del tipo de limpiapipas que utilices, descubrí que hay limpiapipas semi - premium y premium que es un poco más grueso, si textura es más sedosa y esponjosa, ya he comprado varios paquetes y me encantan lastima que vienen de otro estado porque en Barquisimeto no los venden así.
Something that really caught my attention is that the result will also depend on the type of pipe cleaner you use. I discovered that there are semi-premium and premium pipe cleaners, the latter being a bit thicker and having a silkier, fluffier texture. I've already bought several packs and I love them; it's a shame they come from another state because they don't sell them like that in Barquisimeto.
Esta semana me pidieron varios tulipanes de llavero y aproveché de realizarlos con el nuevo limpiapipas y es muy diferente el resultado, les dejo el tutorial a continuación.
This week I was asked for several tulip keychains and I took the opportunity to make them with the new pipe cleaner and the result is very different, I leave you the tutorial below.
| Materiales | Materials |
|---|---|
| Limpiapipas fucsia, verde, morado | Fuchsia, green, and purple pipe cleaners |
| Tijera, silicón | Scissors, silicone |
| Cinta métrica | Measuring tape |
| Aro para llavero | Keychain ring |
| Sombra de ojos | eye shadow |
Paso a paso / Step by step
El primer paso que voy a realizar será seleccionar los limpiapipas color fucsia, luefo cortamos con una medida de 20 cm. Doblamos en la mitad y medimos 4 cm, así mismos giramos dos veces.
Las dos puntas sobrantes laterales las vamos a unir en la parte inferior introduciendo por el centro del limpiapipas, giramos el sobrante y doblamos hacia dentro.
The first step I'm going to take is to select the fuchsia pipe cleaners, then cut them to a length of 20 cm. Fold them in half and measure 4 cm, then twist them twice.
We'll join the two excess ends at the bottom by inserting them through the center of the pipe cleaner, twisting the excess and folding it inwards.
Con ayuda de los dedos damos forma a la punta y terminamos de formar el pétalo, este mismo paso lo realicé para los 4 tulipanes, solo que uno solo será de color morado. Cada tulipán lleva 4 pétalos.
Using our fingers, we shape the tip and finish forming the petal. I repeated this same step for all four tulips, except that one will be purple. Each tulip has four petals.
Ahora vamos a realizar el tallo y la hoja, tomaré un limpiapipas verde, cortamos en la mitad, tomaré una medida de 2 cm y unimos como realicé con el pétalo. Para cada tulipán dos hojas.
Procedemos a pegar 3 pétalos pero antes de pegar el último en el centro voy a colocar un limpiapipas completo para que sostenga realicé un pequeño circulo que quedará en el centro, ahora sí pegamos el último pétalo.
Now we'll make the stem and leaf. I'll take a green pipe cleaner, cut it in half, measure 2 cm, and join it as I did with the petal. Two leaves for each tulip.
Next, we'll glue on three petals, but before gluing the last one in the center, I'll place a full pipe cleaner in a small circle to hold it in place. Now we can glue on the last petal.
Luego voy a doblar el limpiapipas en la mitad, sacamos la punta hacia un lado y pegamos las hojas, con el limpiapipas sobrante cubrimos hasta la punta para fijar las hojitas.
Next, I'm going to fold the pipe cleaner in half, pull the tip to one side and glue the leaves on. With the remaining pipe cleaner, we cover up to the tip to secure the leaves.
Por último colocamos el aro con llavero, para el limpiapipas morado aplique sombra de color morado en las puntas. Y listo, de esta forma terminé estos llaveros, espero les haya gustado el resultado, muchas gracias por el apoyo y por visitar mi publicación. Nos vemos en una próxima oportunidad con más ideas creativas.
Finally, we attached the keyring. For the purple pipe cleaner, I applied purple eyeshadow to the ends. And that's it! That's how I finished these keyrings. I hope you liked the result. Thank you so much for your support and for visiting my post. See you next time with more creative ideas!
Más del resultado final:
More on the final result: