
Hola amigos de #hive, espero que se encuentren bien, y que su fin de semana haya estado cargado de mucha #web3, pero sobre todo que hayan disfrutado muchísimo creando contenidos maravilloso como los que se presentan acá en esta comunidad tan linda llamada #hive diy.
Hace días pude ver por allí que estaba en curso una iniciativa motivado al regreso a clase donde debíamos crear una cartuchera, y me dije que yo no podía faltar a esta iniciativa, así que sin más aquí estoy para traerles mi participación en este concurso, que lleva por nombre: " Regreso a clases con diy- Cartucheras, espero que les guste la que les traigo, aprovechando que estamos en el mes de halloween y que este personaje es uno de mis favoritos, junte todo y este es el resultado, disfrútenlo.
💀LISTA DE MATERIALES 💀

💀 Foami de color negro.
💀 Foami de color blanco.
💀 Silicón líquido.
💀 Plumilla.
💀 Pintura al frío blanca.
💀 Pincel fino.
💀 Tijera.
💀 Regla.
Ahora sí vamos a comenzar con el proceso creativo, que está bien sencillo y fácil de hacer, todos listos, así que manos a la obra.
💀 Pasos del proceso creativo💀
💀Paso 1💀:

Tome la pieza de foami de color negro, y dividí en tres partes iguales, luego le marque en uno de los extremos unos arcos, los cuales, luego recorté, yo utilice una lámina de Foami tipo carta.
💀 Paso 2💀:

Recorté dos tiras bien delgadas de foami, que van a ser mi hilo, después con el saca huecos perfore el foami tres veces en cada lado, asegurándose que el agujero salga por ambos lados del foami.
Luego introduje la línea de foami negro que recorté y fui metiendo de hueco en hueco como se aprecia en la fotografía, luego recorté los sobrantes ycon un poco de silicón líquido sello bien los remates.
💀Paso 3💀:

Ahora recorté dos piezas del foami negro una de unos 6 cm de largo x 1,5 cm de ancho y el otro de 4 cm de largo x medio centímetro.
Tome la pieza pequeña y le aplicó un poco de silicón líquido en ambos extremos y lo pegamos en la parte de abajo y dejamos secar bien, mientras la otra pieza la larga, a esa le aplicó silicón en solo uno de los extremos y pegamos y dejamos secar bien.
💀 Paso 4 💀:

Ahora tome el foami de color blanco y marque y recorte un círculo, luego de recortarle aplicó el silicón líquido y procedimos a pegarlo en la tapa de en frente de mi cartuchera.
💀 Paso 5 💀:

También recorte del foami negro estás dos piezas pequeñas con foma de lágrimas que van a ser los ojos, y recorte otras dos más pequeñas aún que serán la nariz de nuestro Jack.
Cuando tenemos las cuatro piezas procedemos a pegarlas y dejamos secar.
💀 Paso 6 💀:

Ahora tome la plumilla y dibuje la sonrisa característica de este personaje, así como también unas líneas de expresión alrededor de los ojos.
💀 Paso 7 💀:

En el foami negro dibuje y recorte la corbata de Jack que es bien particular, luego le coloque silicón líquido y pegamos.
💀 Paso 8 💀:

Tome el pincel y la pintura al frío blanca y dibuje algunos puntos, así como también le dibuje algunas líneas en la corbata y listo, hemos terminado.
Cómo pueden ver este trabajo es bien fácil de elaborar, práctico y sobretodo bien económico y claro a eso se le suma el agregado que fue creado por nosotros mismos, aquí abajo les muestro como quedó el trabajo finalizado.
💀 RESULTADO FINAL💀









📷 Todas las fotos fueron tomadas con mi teléfono Xiaomi redmi 9T y son de mi propiedad utilizando el programa polish y el traductor Deepl.
por ahora es todo, solo queda despedirse hasta el siguiente trabajo, saludos a todos y a cuidarse.



Hello #hive friends, I hope you are well, and that your weekend has been filled with lots of #web3, but most of all that you have enjoyed creating wonderful content like the ones presented here in this beautiful community called #hive diy.
A few days ago I saw that there was an initiative underway motivated by the back to school where we had to create a pencil case, and I said to myself that I could not miss this initiative, so without further ado here I am to bring you my participation in this contest, which is called: "Back to school with diy- Pencil cases, I hope you like the one I bring you, taking advantage that we are in the month of halloween and that this character is one of my favorites, put everything together and this is the result, enjoy it.
💀LIST OF MATERIALS 💀

💀 Foami black colour
.
💀 White coloured Foami.
💀 Liquid silicone. 💀 White coloured foami.
💀 Nib. 💀 Liquid silicone.
💀 White cold paint.
💀 Fine paintbrush.
💀Scissors.
💀Ruler.
Now let's get started with the creative process, which is very simple and easy to do, everybody ready, so let's get to work.
💀 Steps of the creative process💀
💀Step 1💀:

I took the piece of black foami, and divided it into three equal parts, then I marked on one of the ends some arches, which I cut out, I used a sheet of Foami letter type.
💀 Step 2💀:

I cut two very thin strips of foami, which are going to be my thread, then with the hole puncher pierce the foami three times on each side, making sure that the hole comes out from both sides of the foami.
Then I inserted the line of black foami that I cut out and I went from hole to hole as you can see in the picture, then I cut out the excess and with a little liquid silicone I sealed the ends well.
💀Step 3💀:

Now I cut out two pieces of the black foami, one about 6 cm long x 1.5 cm wide and the other about 4 cm long x half a centimetre.
Take the small piece and apply some liquid silicone on both ends and glue it on the bottom and let it dry well, while the other piece, the long one, we applied silicone on only one of the ends and glue it and let it dry well.
💀 Step 4 💀:

Now take the white foami and mark and cut out a circle, after cutting it out I applied the liquid silicone and proceeded to glue it on the lid of the front of my pencil case.
💀 Step 5 💀:

I also cut out of the black foami these two small tear-shaped pieces that will be the eyes, and cut out two smaller ones that will be our Jack's nose.
When we have the four pieces we proceed to glue them together and let them dry.
💀 Step 6 💀:

Now take the pen and draw the characteristic smile of this character, as well as some expression lines around the eyes.
💀 Step 7 💀:

On the black foami draw and cut out Jack's tie, which is quite unique, then apply liquid silicone and glue it on.
💀 Step 8 💀:

Take the brush and the white cold paint and draw some dots, as well as draw some lines on the tie and that's it, we're done.
How you can see this work is very easy to elaborate, practical and above all very economical and of course the addition that was created by ourselves, here below I show you how the work was finished.
💀 FINAL RESULT💀









📷 All photos were taken with my Xiaomi redmi 9T phone and are my own using polish and the Deepl translator.
that's all for now, just say goodbye until the next job, greetings to all and take care of yourself.
