¡Hola, amigos de Hive! Hoy quiero mostrarles como realice estas preciosas rosas de cartulina.🌷
Hello Hive friends! Today I want to show you how to make these beautiful cardboard roses.🌷
💜💜💜💜💜💜
Como les comente en mi anterior post, hay diversas formas de realizar flores con papel, cartulina, etc. Son súper fáciles de hacer, y muy útiles para decorar; y le aseguro, que si no son muy buenos con las manualidades, seguro les saldrán estas flores.
As I told you in my previous post, there are different ways to make flowers with paper, cardboard, etc. They are super easy to make, and very useful to decorate; and I assure you, if you are not very good with crafts, these flowers will surely come out.
Cabe destacar, que todas las medidas que les he dado son específicamente para flores de topper. Pero, fácilmente ustedes pueden ajustarlas dependiendo de tamaño que deseen, por supuesto, siempre guiándose de su creatividad y del acabado que mas les guste.
It should be noted that all the measurements that I have given are specifically for topper flowers. But, you can easily adjust them depending on the size you want, of course, always guided by your creativity and the finish that you like the most.
¡Ahora sí! Esto es lo que necesitamos para hacer estas hermosas rosas
Now yes! This is what we need to make these beautiful roses
Materiales:
- 3 cuadros de cartulina de 10x10cm C/U
- Unas tijeras
- Pegamento
- Un palillo de altura
Materials:
- 3 cardboard squares of 10x10cm E / U
- Scissors
- Glue
- A tall toothpick
Paso 1✨
Tomamos uno de los cuadros y lo doblamos a la mitad, en diagonal, creando de ese un pequeño triangulito. Lo doblamos de ese modo 2 veces más, hasta que quede este pequeño triangulo. Repetimos este procedimiento con los otros dos cuadros de cartulina, hasta tener 3 triángulos iguales.
Step 1
We take one of the squares and fold it in half, diagonally, creating a small triangle from it. We fold it that way 2 more times, until this small triangle remains. We repeat this procedure with the other two cardboard squares, until we have 3 equal triangles.
Paso 2✨
Ya que tengamos los 3 triángulos, procedemos a hacer lo que serán los pétalos de nuestra rosa. En nuestros dedos, vamos a posicionar el triángulo como si fuera un cono de helado y con la ayuda de nuestra tijera vamos a cortar de forma ovalada la parte más ancha del triángulo; ya que lo hayamos hecho, cortaremos un poco el pico de la parte inferior, de modo que al abrir el triángulo quede un pequeño orificio en el centro.
Hacemos el mismo procedimiento con los otros triángulos.
Step 2
Once we have the 3 triangles, we proceed to make what will be the petals of our rose. In our fingers, we are going to position the triangle as if it were an ice cream cone and with the help of our scissors we are going to cut the widest part of the triangle into an oval shape; Now that we have done it, we will cut the peak at the bottom a little, so that when the triangle is opened there is a small hole in thecenter
We do the same procedure with the other triangles.
Paso 3✨
Al desdoblar nuestros triangulitos, podemos darnos cuenta de que cada uno tomó la forma de una flor. Para poder armar nuestra rosa, debemos tener 6 piezas de diferentes tamaños, por ende, debemos recortar una parte de cada flor para sacar cada una de las piezas restante. ¿Cómo lo haremos? Pues, en forma de escala cortaremos 1, 2 y 3 pétalos de cada flor, es decir, a una le vamos a recortar un pétalo, a la siguiente 2 y a ultima 3, hasta que nos queden de este modo.
Step 3
By unfolding our triangles, we can see that each one took the shape of a flower. In order to assemble our rose, we must have 6 pieces of different sizes, therefore, we must cut a part of each flower to remove each of the remaining pieces. How will we do it? Well, in the form of a scale we will cut 1, 2 and 3 petals of each flower, that is, we are going to cut a petal from one, the next 2 and the last 3, until we have them in this way.
Paso 4✨
Ya que tenemos las 6 piezas, nos falta darles forma. Todas las piezas deben verse como unos conos, de modo que se puedan armar uno sobre otro. En el caso de las flores más grandes, se pegara un pétalo sobre otro y tomara la forma que deseamos; en cuanto a las piezas que recortamos, con la ayuda de un palillo doblamos un poco unos de los extremos hasta que parezca una pestaña, y así podamos pegar ambos lados de la pieza.
Step 4
Since we have the 6 pieces, we need to shape them. All the pieces should look like cones, so that they can be put together one on top of the other. In the case of larger flowers, one petal will be glued on top of another and it will take the shape we want; As for the pieces that we cut, with the help of a toothpick we bend one of the ends a little until it looks like a tab, so we can glue both sides of the piece.
Paso 5✨
Ahora, pegaremos todas las piezas que tenemos. Agregamos un poco de pegamento en la punta del cono, y vamos apilando uno por uno del más grande al más pequeño. Aquí nos ayudara el orificio que hicimos en cada flor, ya que al juntarlas se incrustara uno sobre otro y tendrá la estabilidad para que no se desarme la rosa, quedando de este modo.
Step 5
Now, we will glue all the pieces that we have. We add a little glue to the tip of the cone, and we are stacking one by one from the largest to the smallest. Here the hole we made in each flower will help us, since when they are put together they will be embedded one on top of the other and will have the stability so that the rose does not disarm, remaining in this way.
Paso 6✨
Por último, tomamos el palillo por la parte externa de cada pétalo y doblamos hacia afuera, esto hará que cada pétalo tome una forma diferente y le dará más vista a cada rosa.
Step 6
Finally, we take the toothpick from the outside of each petal and fold it outwards, this will make each petal take a different shape and give each rose more view.
¡Y así de fácil esta nuestra rosa!, en lo personal, a mí me encanta como se ve😍
💖Espero que les haya gustado💖
💜💜💜