(
[ENG/ESP]Acompáñame a hacer un lacito con cintas 🎀/Join me to make a bow with ribbons 🎀/
🎀✨🎀✨🎀✨🎀✨🎀✨🎀✨🎀✨🎀✨🎀
Hola comunidad de #hivediy ! Y artesanos ! El día de hoy les traigo por acá un Tutorial de un accesorio para el cabello para niñas , para complementar un lindo peinado, un par de Lazos hechos con distintas cintas para las más pequeñas de la casa 🏡 ✨
Materiales
🎀Cinta gross
🎀 Cinta de organza estampada
🎀Cintas de raso cero
🎀Hilo y aguja
🎀 Retazos de foami blanco escarchado y dorado.
(Dónde colocar los lacitos caimanes o dos colitas)
✨Manos a la obra✨
English Version
🎀✨🎀✨🎀✨🎀✨🎀✨🎀✨🎀✨🎀✨🎀
Hello #hivediy community! And artisans! Today I bring you here a Tutorial of a hair accessory for girls, To complement a cute hairstyle, a couple of Bows made with different ribbons for the little ones in the house 🏡 ✨
Materials
🎀Gross tape
🎀 Printed organza ribbon
🎀Zero satin ribbons
🎀Thread and needle
🎀 Scraps of frosty white and gold foami.
(Where to place the alligator bows or two little tails)
✨Let's get to work✨
#1 Para hacer estos lacitos busqué cintas que tuviera (retazos ) ya que no tenía mucha variedad, escogí estás que tenían suficiente de largo como para hacer los dos pares de lazos, aprovechando está cinta Gross con estampado de mariposa en tonos naranjas y tierra , y una de organza con estampado de sandías rojas y fondo melón pensé que podía ser buena combinación, para cada lazo con la cinta de mariposa use unos 45 cm de largo x 2,5cm de ancho aproximadamente para hacer el lazo, como ven en las imágenes lo hice sin cortar dejando los extremos del mismo tamaño que cada "orejita" del lazo , doblé ➿ enfrentando la cinta y pase la cinta hacia el lado opuesto en forma diagonal para hacer la orejita del el otro lazo inferior dejando también el extremo fuera con una longitud parecida al cuerpo de cada orejita ,describirlo es un poco complicado que por las imágenes es bastante fácil,la idea es ir haciendo una forma de X para con cuatro orejitas para el lazo y que sobre un extremo apuntando hacia arriba y otro hacia abajo, con un hilo y aguja 🪡 🧵 dí puntadas a través del lazo para fruncirlo y asegurarlo dando varias vueltas de hilo en el medio del lazo.
English Version
#1 To make these bows I looked for ribbons that I had (scraps) since I didn't have much variety, I chose these that were long enough to make the two pairs of bows, taking advantage of this Gross ribbon with a butterfly print in orange and earth tones, and an organza one with a red watermelon print and a melon background I thought it could be a good combination, for each bow with the butterfly ribbon I used about 45 cm long x 2.5 cm wide approximately to make the bow, as you can see in the images I did it without cutting leaving the ends the same size as each "ear" of the bow, I folded ➿ facing the ribbon and passed the ribbon to the opposite side diagonally to make the ear of the other lower bow also leaving the end out with a length similar to the body of each ear, describing it is a bit complicated but from the images it is quite easy, the idea is to make an X shape with four ears for the bow and that on one end pointing up and another down, with a thread and needle 🪡 🧵 I stitched through the bow to gather it and secure it by making several turns of thread in the middle of the bow.
English Version
#2
For the organza bow I used the patterned organza ribbon with temples, about 20 CM long x 2.5 cm wide, with this I made a traditional bow with its two little ears and its ends sticking out, with thread and needle I made stitches and gathered it to give it the shape of the bow 🎀, I also cut the ends diagonally to make it look prettier and sealed the ends with a tinderbox so it wouldn't fray. Using the needle I sewed the organza bow to the larger bow and secured it well by giving it a few turns with the thread.
English Version
#3 I used two size zero satin ribbons (the thinnest ones), combining melon and orange colors, I cut 21 CM of each and with the two together I made a traditional bow 🎀, sewing the middle to secure it well, and then I sewed this little bow in the middle of my large bow to make it stand out more, I secured it by making several turns in the middle of the bow.
English Version
#4 To make the center of the bow, I thought about making it with foam with scraps that I had, I made two circles in golden foam of about 3cm, and from there I got the shape of a flower with 6 petals, with frosted white foam I also made two more circles but about 2.5cm and I got a flower with 6 petals but much smaller, with thread I also sewed both of them giving it a few stitches to join them, the good thing about Foam is that it can also be sewn.
English Version
#5 Using scraps of the satin ribbon, I cut a strip of about 3cm and began to knot it by making three knots, with a tinderbox I heated the remaining ends and when it began to melt I molded them so that they had the shape of a ball to use. I also secured the center of the flower with a few stitches, trying to hide the burnt side, once finished I sewed the flower in the center securing it with stitches so that they could not be seen, also, at each end I added a little detail of a green flower appliqué with a delicate stitch.
✨Espero que les gustará, muchas gracias por leerme!✨
Fotos tomadas por mi en equipo redmi note 12, editadas en pics art y gifs creados en app creador de gifs, texto traducido en Google traductor (una disculpa hay algunos errores de traducción en el idioma ingles debido al uso del traductor).
English Version
And that's it!!! This would be the result! I really liked how it turned out because I didn't have that many materials and those ribbons didn't seem to go well with other bows, but the colors with the satin ribbons and the combination of 🌈 finally came to light, also the little flower gives it life and draws attention. It was a challenge because I didn't use any silicone but just sewing, which I think is how the details are saved (and cough cough I ran out of silicone 🫢).
I made a couple, you can glue a little alligator/clip on it with silicone or sew it to some ponytails! It's a beautiful detail for the princesses of the house, it's all in the combination of ribbons of various sizes and textures to make them look prettier! I had a lot of fun and de-stressed doing it.
✨I hope you like it, thank you very much for reading me!✨
Photos taken by me on a redmi note 12 device, edited in pics art and gifs created in the gif creator app, text translated in Google Translate (I apologize, there are some translation errors in the English language due to the use of the translator).