FULL ENGLISH VERSION
Greetings, lovely people of #HiveDIY. Today I'm getting back to my 💜 Hearts 💜 art. This time I wanted to make one with a 3D effect, but it didn't turn out as expected. I got my inspiration from a Pinterest video, where the popping heart effect looks even better. Of course, they also used light or dark colors and markers that I don't have on hand, so I was forced to improvise.
𝐒𝐭𝐞𝐩-𝐛𝐲-𝐒𝐭𝐞𝐩
The first thing I did was draw a large freehand heart as symmetrical as possible. That is, both the top center and bottom center were on the same line.
Then I highlighted in black and erased the pencil lines.
Now I made a small frame around it to highlight the edge of the drawing with one of my favorite colors that can't be missing in any of my drawings: black.
With the heart frame now highlighted in black, I begin drawing lines with two grids of space between each one. First vertically, then horizontally. It's worth noting that when drawing these lines, I skip over the inside of the heart.
| Horizontal | Vertical |
|---|---|
Now it's time to draw the lines inside the heart, and I start by drawing a cross across the middle, taking into account the vertical and horizontal centers:
Now I draw curved lines with a pencil, using the points where the outer lines ended as a guide. I start vertically on the left side:
Now I draw the vertical lines on the left side following the same pattern but with the curve outwards on the right side.
Now it's time for the horizontal lines, and to do so, I start at the top of both the left and right sides. Again, I curve the line upwards, using the outer and center lines as a guide.
Now come the lower horizontal lines, which, like the ones above, are drawn curved but downwards, looking like this:
The next step is just to highlight the lines made in pencil with a fine-tipped black color:
Now comes the fun part: coloring the drawing. This time I decided to use only four colors, but you can use more. I used dark colors for the outside and light colors for the heart, hoping for a contrast that I'm not sure I achieved.
The first shade I used was red because it represents passion and since it's a heart, this color couldn't be missing.
Next, I used a dark green and took advantage of the opportunity to draw two vertical lines in the center of the heart, which I thought were missing. Now it's time to color the inside of the heart.
For the interior, I used the lightest green I had and a pink. This part was a bit confusing because the idea was to alternate the colors, meaning where the green ended, the pink would begin.
But since I made a mistake at the beginning and didn't want to redo the whole drawing, I decided to leave it as is and color it all in. To finish it, I just added a little shading to the heart cubes, so everything looks like this:
𝐅𝐢𝐧𝐚𝐥 𝐑𝐞𝐬𝐮𝐥𝐭
As you can see, I used a dark green shade and drew a sort of L on each green cube. I did the same with the pink one, using a darker shade and drawing an L on each one.
What did you think of the result? Did you like it? Can you see the relief effect I was looking for? Let me know in the comments what you think; I'll be reading them. I hope you like it. See you in my next post! 💚
Español
Saludos gente linda de #HiveDIY. Hoy retomo nuevamente mi arte de 💜 Corazones 💜. En esta ocasión quise hacer uno con efecto tridimensional pero no me salió como esperaba. La inspiración la obtuve de un video de Pinterest, donde el efecto de que el corazón sobresale se ve mejor. Claro allí también usaron colores y marcadores claros u oscuros que no tengo a la mano y me vi obligada a improvisar.
𝐏𝐚𝐬𝐨 𝐚 𝐏𝐚𝐬𝐨
Lo primero que hice fue dibujar un corazón grande a mano alzada lo más simétrico posible. Es decir, que tanto la parte central superior como la parte central inferior quedaran en la misma línea.
Luego o resalté en negro y borré las líneas hechas a lápiz.
Ahora hice un pequeño marco alrededor para resaltar el borde del dibujo con uno de mis colores favoritos que no puede faltar en ninguno de mis dibujos: el negro.
Ya con el marco del corazón resaltado en negro, empiezo a trazar líneas con 2 cuadrículas de espacio entre cada una. Primero de manera vertical, luego horizontal. Cabe destacar, que al trazar estas líneas, me salto el interior del corazón.
| Horizontal | Vertical |
|---|---|
Ahora toca hacer las líneas en el interior del corazón, y empiezo trazando una cruz en todo el medio. Tomando en cuenta el centro vertical y el centro horizontal:
Ahora trazo líneas curvas con un lápiz tomando de guía los puntos donde terminaron las líneas exteriores. Empiezo primero del lado izquierdo de manera vertical:
Ahora trazo las líneas verticales del lado izquierdo siguiendo el mismo patrón pero con la curva hacia afuera del lado derecho.
Ahora tocan las líneas horizontales y para ello empiezo en la parte superior tanto de la izquierda como de la derecha. De nuevo curveando la línea hacia arriba y tomando de guía las líneas exteriores y del centro.
Ahora vienen las líneas inferiores horizontales, que al igual que las de arriba, se dibujan curveadas pero hacia abajo, quedando de la siguiente manera:
El siguiente paso sólo es resaltar las líneas hechas a lápiz con color negro punta fina:
Ahora viene lo divertido, que es colorear el dibujo. En esta ocasión decidí usar 4 colores nada más, pero ustedes pueden usar más. Yo usé colores oscuros para afuera y colores claros para el corazón, queriendo obtener un contraste que no sé si logré.
El primer tono que usé fue el rojo porque representa la pasión y como es un corazón, este color no podía faltar.
Luego usé un verde oscuro y aproveché de dibujar 2 líneas verticales en el centro del corazón que a mi parecer le hacían falta. Ahora toca colorear el interior del corazón.
Para el interior usé el color verde más claro que tenía y un rosa. Esta parte fue algo confusa porque la idea era intercalar los colores, es decir, donde terminaba el verde, debía empezar el rosado.
Pero como me equivoqué al empezar y para no hacer todo el dibujo de nuevo, decidí dejarlo así y colorearlo todo. Ya para terminarlo, sólo agregué un poco de sombra en los cubos del corazón, quedando todo de la siguiente manera:
𝐑𝐞𝐬𝐮𝐥𝐭𝐚𝐝𝐨 𝐅𝐢𝐧𝐚𝐥
Como pueden observar usé un tono verde oscuro y dibujé una especie de L en cada cubo verde. Lo mismo hice con el rosado, usé un tono más oscuro y tracé una L en cada uno de ellos.
A ustedes ¿qué les pareció el resultado? ¿Les gustó? ¿Logran ver el efecto relieve que buscaba darle? Déjenme saber en los comentarios su opinión, los estaré leyendo. Espero que les haya gustado ¡Hasta mi siguiente post! 💚
| 𝐄𝐥𝐞𝐦𝐞𝐧𝐭𝐨𝐬 (𝐄𝐥𝐞𝐦𝐞𝐧𝐭𝐬) | 𝐇𝐞𝐫𝐫𝐚𝐦𝐢𝐞𝐧𝐭𝐚𝐬 (𝐓𝐨𝐨𝐥𝐬) |
|---|---|
| Las Fotos Utilizadas a lo largo del Post son de mi galería (Photos used throughout the post are from my gallery) | Cámara del Teléfono Redmi Note 9A (Redmi Note 9A Phone Camera) |
| Contenido y Texto Original de mi Autoría (Content and Original Text of my Authorship) | Google Translator |
| CANVA |