Feliz inicio de semana gente! Seguimos en modo creativo por aquí y les quiero compartir el paso a paso de unos zarcillos bastante lindos que elaboré hace unos días para combinar con algunas de mis últimas creaciones por el día del amor y la amistad, en este caso para combinar con los accesorios que tienen los coralitos, que la verdad es que a mi me gustan muchísimo, así que decidí hacer unos aretes que hagan juego.
Happy start to the week, everyone! We're still in creative mode here, and I want to share with you the step-by-step process of making some really cute earrings that I made a few days ago to go with some of my latest creations for Valentine's Day. In this case, they go with the accessories that have coral beads, which I really like, so I decided to make some matching earrings.
En este caso usé nuevamente un diseño tanto sencillo como fácil de hacer con coralitos combinados con unas cuentas rectangulares y cadena, dando como resultado unos zarcillos muy lindos y delicados porque la verdad no me gustan mucho los accesorios voluminosos, de hecho, mientras más discretos mejor.
Y ahora sí, nos vamos con los materiales y el paso a paso.
In this case, I once again used a simple and easy-to-make design with coral beads combined with rectangular beads and chain, resulting in very pretty and delicate earrings because, to be honest, I don't really like bulky accessories; in fact, the more discreet, the better.
And now, let's get started with the materials and step-by-step instructions.
Materiales
2 ganchos para aretes
Corales pequeños
Cuentas rectangulares doradas
Cadena decorativa dorada
Alfileres de ojo
Pinza plana
Tenaza
Pinza de punta redonda
Materials
2 earring hooks
Small corals
Rectangular gold beads
Decorative gold chain
Eye pins
Flat pliers
Needle-nose pliers
Round-nose pliers
Paso a paso/Step by step
Como les dije es un diseño bastante sencillo, y para cada arete vamos a necesitar dos piezas. Una va a estar formada por dos corales y una cuenta rectangular y la otra por una pieza de cadena.
As I mentioned, it's a fairly simple design, and we'll need two pieces for each earring. One will consist of two corals and a rectangular bead, and the other will consist of a piece of chain.
Para iniciar con el trabajo, vamos a cortar una pieza de la cadena, que como pueden ver es un diseño bien lindo con piezas de 1.5 cm unidas entre sí, y lo que hice fue cortarla para obtener dos piezas, una para cada zarcillo.
To begin the work, we are going to cut a piece of the chain, which, as you can see, has a very pretty design with 1.5 cm pieces linked together. What I did was cut it to obtain two pieces, one for each earring.
Seguidamente vamos con la otra pieza de nuestros aretes que será la de los corales, y para ello vamos a tomar un alfiler de ojo por el cual haremos pasar 2 corales y, finalmente, la pieza rectangular dorada.
Next, we move on to the other piece of our earrings, which will be the coral ones. To do this, we will take an eye pin through which we will thread two corals and, finally, the rectangular gold piece.
Lo siguiente es cortar el excedente de nuestro alfiler de ojo, y dejaremos un pedacito pequeño que doblaremos hacia adentro sobre sí mismo con ayuda de la pinza redonda y finalmente cerramos con la pinza plana, y como puedan ver no queda un aro u "ojo" como en el otro extremo del alfiler, ya que no lo necesitamos, así que solo cerramos tratando de que quede lo más prolijo y bonito posible.
The next step is to cut off the excess from our eye pin, leaving a small piece that we will fold inward on itself with the help of the round pliers and finally close with the flat pliers. As you can see, there is no loop or "eye" like at the other end of the pin, since we don't need it, so we just close it, trying to make it as neat and pretty as possible.
Con las dos piezas que van a formar nuestro arete ya listas lo siguiente es tomar el gancho que será la base que sujetará nuestras piezas, y para ello abriremos el "ojito" con ayuda de la pinza redonda y haremos pasar tanto los corales como la pieza de cadena y cerramos con la pinza plana, y de esta forma, tendremos listo nuestro primer arete.
With the two pieces that will form our earring ready, the next step is to take the hook that will be the base that will hold our pieces in place. To do this, we will open the "eye" with the help of the round pliers and pass both the corals and the piece of chain through it, then close it with the flat pliers. And just like that, our first earring is ready.
Lo siguiente, por supuesto, es repetir el procedimiento para obtener nuestro segundo arete, y de esta forma bastante sencilla, está listo mi par de zarcillos que puedo combinar con varios de mis accesorios.
The next step, of course, is to repeat the process to make our second earring, and in this very simple way, my pair of earrings is ready to be combined with several of my accessories.
Como ven es un trabajo muy sencillo, pero bastante bonito, y sobre todo a mi gusto, ya ustedes lo pueden elaborar con los materiales y colores de su elección, yo solo les dejo la idea y ustedes dejan volar su imaginación.
As you can see, it's a very simple project, but quite beautiful, and above all, to my taste. You can make it with the materials and colors of your choice. I'll just give you the idea, and you can let your imagination run wild.
📷Photography by|Fotografía por:,🔅 Cover created in/Portada creada en Canva, Separator and banner/separador y banner, 🇺🇸Translated with www.DeepL.com/Translator (free version)