Holis gente bonita|Hello beautiful people🥰
El día de hoy quiero compartir mi experiencia haciendo este Topper de Maverick la película de Tom Cruise y es que hace poco fue el cumpleaños de mi cuñado y como es fan de estás películas quise hacerle un Topper con esa temática.
Today I want to share my experience making this topper inspired by the Tom Cruise movie Maverick. My brother-in-law recently had a birthday, and since he’s a fan of these movies, I wanted to make him a topper with that theme.
Fue todo un desafío para mí este Topper primero porque lo hice a última hora porque no tenía todos los materiales y soy bastante mala trabajando bajo presión, además de eso el día que por fin tuve los materiales completos tenía otro compromiso ineludible y tuve que rendir para ambas cosas, además de eso tengo dos semanas mal con dolores de cabeza 🤕 por la cervical y las manualidades y la cervical al parecer son enemigas. 🥴
This topper was quite a challenge for me, first of all because I made it at the last minute—I didn’t have all the materials, and I’m pretty bad at working under pressure. On top of that, the day I finally had all the materials, I had another unavoidable commitment, so I had to juggle both. Plus, I’ve been having a rough couple of weeks with headaches 🤕 due to my neck—it seems like crafts and my neck are natural enemies. 🥴
A pesar del poco tiempo y el malestar siento que me quedo hermoso, intenté capturar, lo más que pude, la esencia de esta película añadiendo al Topper no solo los colores azul blanco y rojo y simulando el logotipo de la película sino que también añadí elementos como el avión y las estrellas y como intentó hacer en todos los regalos que hago lo personalice poniendo el nombre de mi cuñado, pero ya sin más preámbulo los invito a ver la lista de materiales y el paso a paso.
Despite the limited time and feeling under the weather, I think it turned out beautifully. I tried to capture, as best I could, the essence of this movie by adding not only the blue, white, and red colors to the topper and mimicking the movie’s logo, but also by including elements like the airplane and the stars. And, as I try to do with all the gifts I make, I personalized it by adding my brother-in-law’s name. But without further ado, I invite you to check out the materials list and the step-by-step instructions.
🌹Materiales|Materials🌹
- Foami escarchado azul.
- Foami escarchado rojo.
- Foami escarchado blanco.
- Hoja.
- Lápiz.
- Bolígrafo.
- Tijeras.
- Silicón frío.
- Palillos de altura.
- Blue frosted foam.
- Red frosted foam.
- White frosted foam.
- Sheet of paper.
- Pencil.
- Ballpoint pen.
- Scissors.
- Cold silicone.
- Long toothpicks.
🌹Paso a paso|Step-by-step🌹
Primero elaboré los moldes de las letras la estrella y el avión o creo que eso es una avioneta, no estoy segura, la verdad no he visto la película 🤭 intenté como siempre hacer las letras lo más parecidas posible a veces las calco, pero está vez las dibuje porque la verdad es un tipo de letra bastante sencilla. Luego hice el LineArt con mi bolígrafo roler y las recorte.
First, I made the stencils for the letters, the star, and the airplane—or I think it’s a small plane; I’m not sure, to be honest, I haven’t seen the movie 🤭. As always, I tried to make the letters look as similar as possible; sometimes I trace them, but this time I drew them because, honestly, it’s a pretty simple font. Then I did the line art with my rollerball pen and cut them out.
Luego transferí los moldes de las letras y el avión al foami azúl escarchado y los recorte.
Then I transferred the letter and airplane templates onto the frosted blue foam and cut them out.
En esta parte comencé a ubicar cada pieza encima de la base que es el foami escarchado blanco, al principio no sabía muy bien como iba a ubicar cada elemento, así que sin añadirle el silicón comencé a acomodar las piezas para ver de que forma quedaban mejor.
In this step, I started placing each piece on top of the white frosted foam base. At first, I wasn’t quite sure how I was going to arrange each element, so without using any silicone, I began arranging the pieces to see which layout looked best.
Luego de decidir cómo quería ubicar cada pieza las pegué con silicón frío, es muy importante este paso, el de pegar las letras y cada pieza, hacerlo con silicón frío ya que este tipo de silicón nos permite mover las piezas y acomodarlas bien al foami ya que no se seca tan rápido, una vez intenté hacerlo con silicón caliente y fue un desastre.
After deciding how I wanted to arrange each piece, I glued them down with cold silicone. This step—gluing the letters and each piece—is very important. It’s essential to use cold silicone because this type allows you to move the pieces around and position them properly on the foam; it doesn’t dry as quickly. I once tried using hot silicone, and it was a disaster.
Como pueden ver en la imagen justo en el nombre quise simular el logotipo de la película, así que recorte unas tiras en foami azúl escarchado y rojo de medio centímetro de ancho y las coloqué a los lados del nombre. Luego de que estuvo todo bien pegado al Foami escarchado blanco recorte dejando un pequeño borde a los lados.
As you can see in the picture, I wanted to mimic the movie’s logo right in the title, so I cut out some strips of frosted blue and red foam board, each half a centimeter wide, and placed them on either side of the title. Once everything was securely glued to the frosted white foam board, I trimmed it, leaving a small border on the sides.
Por último con silicón caliente puse el palillo de altura por la parte de atrás y quedó listo el Topper de Maverick, también recorte varias estrellas de foami que combinan con la temática de la película y listo, creo que es primera vez que hago varios Topper de una misma temática, siempre hago un solo Topper que dice feliz cumpleaños con el nombre de la persona y ya, pero está vez quise hacer algo un poco diferente. 🥰❤️😘
Finally, using hot glue, I attached the tall stick to the back, and Maverick’s cake topper was done. I also cut out several foam stars that match the movie’s theme, and that’s it! I think this is the first time I’ve made multiple cake toppers with the same theme—I usually just make a single topper that says “Happy Birthday” with the person’s name, but this time I wanted to do something a little different. 🥰❤️😘
Y esto es todo por hoy, sí les gusto no olviden darle amorshito a mi post dejando un lindo comentario o dando click en el corazoncito. 💜😉😊🤭🥰
Nos vemos en un próximo post, que estén bien y Dios los bendiga, bye.🥰😘💜🌹🪷
And that's all for today, if you like me don't forget to give love to my post by leaving a nice comment or clicking on the little heart. 💜😉😊🤭🥰
See you in a next post, be well and God bless you, bye.🥰😘💜🌹🪷
Fotografías propias, tomadas con mi Tecno Spark 10 Pro editadas en incollage/ portada creada en Canva. Traducción al inglés con DeepL.
Own photos, taken with my Tecno Spark 10 Pro edited in incollage/ cover created in Canva. Translation to English with DeepL.