Greetings to all friends of HIVE especially this nice community #hivediy is a pleasure for me to be again bringing a new creation for all of you made with my little hands and this time I made it with waste material and thus contribute to keeping the environment clean and so simple that I made it with a beer bottle of those that are not returnable and I brought about 5 to continue making other creations and then give away or sell.
Se trata de una botella vestido de Santa como ya estamos desde muy temprano celebrando las entrada de Navidad por ejemplo yo ya empecé a decorar mi casa sacando los adornos navideños y este que le voy hacer el paso a paso lo voy a utilizar para seguir adornando un espacio en mi hogar, es muy bonito hacerlo así que los invito a acompañarme.
This is a bottle dressed as Santa as we are already very early celebrating the entrance of Christmas for example I have already started to decorate my house taking out the Christmas decorations and this I will do the step by step I will use it to continue decorating a space in my home, it is very nice to do so I invite you to join me.
MATERIALES A UTILIZAR:
MATERIALES A UTILIZAR:
MATERIALS TO BE USED:
- Botella de vidrio
- Foami amarillo, negro
- Tela de fieltro rojo
- Silicón líquido
- Pistola de silicón y barra
- Un centímetro
- Tijera
- Cordón dorado
- Regla
- Lápiz
- Perlitas.
- Glass bottle
- Foami yellow, black
- Red felt fabric
- Liquid silicone
- Silicone gun and stick
- One centimeter
- Scissors
- Gold cord
- Ruler
- Pencil
- Beads.
PROCEDIMIENTO:
PROCEDIMIENTO:
PROCEDURE:
PASO 1
PASO 1
STEP 1
Lo primero que hice fué tomar las medidas a la botella de vidrio alrededor con mi centímetro y mi lápiz para marcar en la tela de fieltro fue a la mitad de la botella que fueron 19 cms alrededor y 10 1/2 de altura marco y paso raya para luego cortar.
The first thing I did was to take the measurements of the glass bottle all around with my centimeter and pencil to mark on the felt fabric was to the middle of the bottle which was 19 cms around and 10 1/2 cm high frame and step line and then cut.
PASO 2
PASO 2
STEP 2
Luego tomo el foami amarillo escarchado e igualmente tomo medidas para sacar acá el cuadrado de la hebilla de la correa fueron 4 1/2 X 4 1/2 y luego medí 1 cms alrededor del cuadrado y recorté y el centro quedó descubierto.
Then I take the frosted yellow foami and also take measurements to get the square of the strap buckle here it was 4 1/2 X 4 1/2 and then I measured 1 cms around the square and cut out and the center was left uncovered.
PASO 3
PASO 3
STEP 3
Después acá tengo listo mi correa para Santa este lo recorte con las siguientes medidas 19 cms alrededor y de altura 3 cms y lista ya la correa con la hebilla.
Then here I have ready my strap for Santa, I cut it with the following measures: 19 cms around and 3 cms height and ready the strap with the buckle.
PASO 4
PASO 4
STEP 4
Después tomo la botella de vidrio pero ya previamente lavada y secada muy bien y ya tenía cortada la tela de fieltro para colocarsela alrededor para empezar a vestir a Santa se la pusé bien para empezar a pegar con silicón caliente todo alrededor poco a poco, te sobra un poco de excedente en la parte de abajo pero le recorta con la tijera y empareja.
Then I took the glass bottle but previously washed and dried very well and had already cut the felt fabric to place it around to start dressing Santa I put it well to start gluing with hot silicone all around little by little, you have a little left over at the bottom but cut it with the scissors and even it out.
PASO 5
PASO 5
STEP 5
Luego con la pistola de silicón caliente en el pico de la botella empieza agregarle pega y colocas el cordón poco a poco y le agregas pega así va haciendole hasta donde te llega el vestido rojo de santa.
Then with the hot silicone gun on the top of the bottle start adding glue and place the cord little by little and add glue and so on until you get the red santa dress.
PASO 6
PASO 6
STEP 6
Observa aquí como va quedando pegado y ya estoy finalizando hasta donde me indica el color rojo.
Observe here how it is being glued and I am already finishing up to where the red color indicates me.
PASO 7
PASO 7
STEP 7
Aquí ya tengo listo todo para empezar a ensamblar parte del cuerpo de Santa.
Here I have everything ready to start assembling part of Santa's body.
PASO 8
PASO 8
STEP 8
Comienzo a colocarle parte de la correa agregando un poco de pega líquida y se la pego alrededor de la botella.
I start to attach part of the strap by adding some liquid glue and glue it around the bottle.
PASO 9
PASO 9
STEP 9
Y así termino de decorar mi linda botella de Santa y me encanta el resultado se ve hermosa.
And so I finish decorating my cute Santa bottle and I love the result it looks beautiful.
Gracias por su grata visita y sus comentarios, espero le haya gustado el paso a paso de esta hermosa creación hecha con materiales de reciclaje simplemente con una botella de cerveza puedes lograr este hermoso resultado que te va a embellecer un espacio en tu hogar o simplemente para regalar en estas navidades.
Thank you for your visit and your comments, I hope you liked the step by step of this beautiful creation made with recycled materials simply with a beer bottle you can achieve this beautiful result that will beautify a space in your home or just to give away this Christmas.
Todas mis imágenes son tomadas con mi celular Logicl55b y la primera foto editada con la aplicación inshot collage,
Traducido con deepl translate.
All my images are taken with my Logicl55b cell phone and the first photo edited with the inshot collage application,
Translated with deepl translate.
BENDICIONES PARA TODOS.
BLESSINGS TO ALL.