✨🌵¡Hola amigos amantes de la creatividad! Espero que hayan pasado un muy buen comienzo de semana.🌵✨
Espero que estén bien, amigos y que su semana siga de la mejor manera.
Este día les comparto el paso a paso para elaborar unos imanes de cactus para el refrigerador. Para los que ya conozcan mi blog, sabrán que cada cierto tiempo les comparto ideas de imanes para su refrigerador, pues al pasar un tiempo con las mismas decoraciones me aburro y los quiero cambiar, supongo que a algunos les pasa lo mismo. También es una buena idea para vender estas decoraciones, ya que son sencillas y se requiere de pocos materiales. En esta ocasión quise elaborar un dúo de cactus con formas diferentes, pero siguiendo el mismo estilo, aun así te muestro como elaborar ambas decoraciones.
🔸Sin más que añadir, a continuación los dejo con el paso a paso:
✨🌵¡Hello friends who love creativity! I hope you had a very good start to the week.🌵✨
I hope you are well, friends and that your week continues in the best way.
This day I share the step by step to make some cactus magnets for the refrigerator. For those who already know my blog, you will know that from time to time I share ideas of magnets for your refrigerator, because when I spend time with the same decorations I get bored and I want to change them, I suppose that the same thing happens to some. It is also a good idea to sell these decorations, since they are simple and require few materials. This time I wanted to make a cactus duo with different shapes, but following the same style, even so I show you how to make both decorations.
🔸Without more to add, then I leave you with the step by step:
♥️ESPERO QUE TE GUSTE,
¡Empecemos!
♥️I HOPE YOU LIKE IT,
Let's start!
🌱 MATERIALES | 🌱 MATERIALS
- Cartulina escolar negra.
- Foami verde oscuro.
- Foami verde claro.
- Foami escarchado dorado.
- Foami escarchado rojo.
- Foami blanco.
- Foami marrón.
- Marcadores.
- Imán delgado
- Perlas plásticas doradas.
- Tijera.
- Papel.
- Pega.
- Regla.
- Lápiz.
- Black school cardboard.
- Dark green foam.
- Light green foam.
- Golden frosted foami.
- Red frosty foami.
- white foam.
- brown foam.
- Markers.
- thin magnet
- Golden plastic pearls.
- Scissors.
- Paper.
- Job.
- Ruler.
- Pencil.
🌵 PROCEDIMIENTO | 🌵 PROCESS
- PASO 1:
Lo primero que debemos hacer son los patrones de los cactus con la forma deseada. En mi saco, quise hacer un cactus grande con varios cactus y otro más pequeño pero ovalado, guiándome por el mismo tamaño de maceta para ambos. Luego de esto, trazar los patrones en el color correspondiente de foami, en mi caso, un cactus en foami verde oscuro, de 6 cm de largo, un cactus en foami verde claro, de 4 cm de largo y dos macetas en foami marrón, de 4 cm x 3 cm.
- STEP 1:
The first thing we must do is the patterns of the cacti with the desired shape. In my case, I wanted to make a large cactus, with several cacti and another smaller but oval one, following the same pot size for both. After this, trace the patterns in the corresponding color of foami, in my case, a 6 cm long dark green foam cactus, a 4 cm long light green foam cactus and two 4 cm x 3 cm brown foam pots.
- PASO 2:
Una vez listas las piezas, comencé con el cactus más grande. Con un marcador negro o verde, detalla el borde del cactus, unas líneas para darle forma en la parte central, divide cada sección y haz lo mismo con la maceta utilizando un marcador negro o marrón. También da algunos detalles extra en las macetas. Una vez listo, une las piezas con pegamento.
- STEP 2:
Once the pieces were ready, I started with the largest cactus. With a black or green marker, detail the edge of the cactus, some lines to give it shape in the central part, divide each section and do the same with the pot using a black or brown marker. It also gives some extra details on the pots. Once ready, join the pieces with glue.
- PASO 3:
Luego, en foami blanco, hacer dos flores con el diseño deseado y pegar en el cactus como más te guste y para el centro de la flor un pequeño círculo en foami dorado. Por otra parte, recortar dos corazones pequeños en foami escarchado rojo y pegar, uno en el centro de la maceta y el otro en la parte superior. Por último, pegar todas perlas doradas por todo el cactus, para simular las espinas.
📌Dejamos a un lado unos minutos y comenzamos con el otro cactus.
- STEP 3:
Then, in white foami, make two flowers with the desired design and stick on the cactus as you like and for the center of the flower a small circle in gold foami. On the other hand, cut out two small hearts in red frosted foam and glue, one in the center of the pot and the other at the top. Finally, glue all the golden pearls all over the cactus, to simulate the thorns.
📌We set aside a few minutes and started with the other cactus.
- PASO 4:
Para el cactus ovalado, dar detalles con un marcador verde o negro alrededor del borde del cactus y hacer pequeñas líneas que dividan las partes del cactus, para dar contraste. Para la maceta, haz el mismo diseño que antes y luego pega las piezas.
- STEP 4:
For the oval cactus, detail with a green or black marker around the edge of the cactus and make small lines dividing the parts of the cactus, for contrast. For the flower pot, make the same design as before and then glue the pieces together.
- PASO 5:
Dibuja la misma flor en foami blanco, pero esta vez córtala por la mitad, dale forma de óvalo abajo, pégala encima del cactus y el círculo dorado que va en el medio de la flor. Recorta dos corazones pequeños nuevamente, pega uno en el centro de la maceta y el otro en un lado de la flor. Finalmente, pega las perlas doradas en el orden deseado.
- STEP 5:
Draw the same flower on white foam, but this time cut it in half, shape it into an oval at the bottom, glue it on top of the cactus and the golden circle that goes in the middle of the flower. Cut out two small hearts again, glue one in the center of the pot and the other on one side of the flower. Finally, glue the gold pearls in the desired order.
- PASO 6:
Una vez que ambos cactus estén listos, para que la parte de atrás se vea más prolija, pega ambos cactus en cartulina escolar negra y corta el exceso. Corta un trozo delgado de imán y pégalo en la parte de atrás, justo en el centro.
- STEP 6:
Once both cacti are ready, to make the back look neater, paste both cacti on black school cardboard and cut the excess. Cut a thin piece of magnet and glue to the back, right in the middle.
✨🌵¡Y listo!🌵✨ Es así como de una manera bastante sencilla y rápida, puedes realizar una hermosa decoración para tu nevera. Recuerda que puedes hacer la figura que quieras y que solo te doy una idea para inspirarte. Espero que les haya gustado el paso a paso y se animen a elaborarlo
❤️Hasta la próxima publicación.
✨🌵¡And ready!🌵✨ This is how in a fairly simple and fast way, you can make a beautiful decoration for your fridge. Remember that you can make the figure you want and that I only give you an idea to inspire you. I hope you liked the step by step and are encouraged to elaborate it
❤️Until the next post.
✨RESULTADO: | ✨RESULT:
!TE DESEO UN GRAN DÏA¡
Todas las fotografías son de mi propiedad.
Separador y Fotos editadas en Canva
!I WISH YOU A GOOD DAY
All photographs are my property.
Photos edited in Canva