✨¡Hola amigos amantes de la creatividad! Espero que estén todos bien.✨
¡Buenas tardes, amigos! Espero estén pasando una excelente semana. Por mi parte, contenta de pasar por acá a compartir una linda idea con ustedes. En esta ocasión les comparto el paso a paso para elaborar unos lindos imanes con temática navideña. Estoy muy contenta de compartirles esta idea; me parece una linda decoración para dar vida a las neveras, jaja, es que todo tiene que estar decorado, hasta el más mínimo detalle cuenta. Luego de reponer algunos materiales, me decidí por crear un tren decorado y el conductor del mismo.
🔸Sin más que añadir, a continuación los dejo con el paso a paso:
✨¡Hello friends who love creativity! I hope you are all well.✨
Good afternoon, friends! I hope you're having a wonderful week. I'm happy to stop by and share a lovely idea with you. This time, I'm sharing the step-by-step instructions for making some cute Christmas-themed magnets. I'm so excited to share this idea; I think it's a great way to brighten up refrigerators, haha, everything has to be decorated, even the smallest detail counts. After replenishing some supplies, I decided to create a decorated train and its conductor.
🔸Without more to add, then I leave you with the step by step:
♥️ESPERO QUE TE GUSTE,
¡Empecemos!
♥️I HOPE YOU LIKE IT,
Let's start!
✂️ MATERIALES | ✂️ MATERIALS
- Foami escarchado dorado.
- Foami verde, rojo, amarillo.
- crema, gris, negro.
- Pinturas y marcadores.
- Pegamento.
- Tijeras.
- Regla.
- Hoja blanca.
- Lápiz.
- Gold glitter foam.
- Green, red, and yellow foam.
- Cream, gray, and black foam.
- Paints and markers.
- Glue.
- Scissors.
- Ruler.
- White paper.
- Pencil.
🌟 PROCEDIMIENTO | 🌟 PROCESS
✨PASO 1:
Lo primero, como siempre, es tomar una hoja blanca y dibujar la idea que tenemos en mente; en mi caso, como dije al inicio, tenía pensado ya en un tren, pero claro, tenía que pensar qué decoraciones navideñas y dónde colocarlas, así que pensé en una corona navideña y unas hojas de acebo, tanto para el tren como para el conductor, que en este caso solo quería elaborar la cara para que no se viera tan grande. Al tener listas las ideas, es momento de transferir a los colores correspondientes de foami, como explico a continuación:
✨Parte trasera del tren: 6 cm x 3.5 cm en foami rojo.
✨Parte delantera del tren: 3.8 cm x 3.5 cm en foami verde.
✨Techo: 4.5 cm x 1 cm en foami verde.
✨Faro: 1.5 cm x 1 cm en foami amarillo.
✨Chimenea: 2.5 cm x 1 cm en foami gris y 1.5 cm en foami escarchado dorado.
✨Parachispas: 2 cm x 1.5 cm en foami rojo.
✨Ruedas: 2 cm de circunferencia y 2.5 cm de circunferencia en foami negro.
✨Centro y mecanismo de ruedas: 1 cm de circunferencia en foami amarillo y 3 cm en foami escarchado dorado.
✨Corona: 4 cm de circunferencia en foami verde.
✨Lazo: 2 cm en foami rojo.
✨Hojas de acebo: 2.5 cm y 1.5 cm en foami verde.
✨Frutos: 1 cm y 0.5 mm de circunferencia y foami rojo.
✨Cabeza: 4.5 cm x 3 cm en foami crema.
✨Sombrero: 4 cm x 2 cm en foami negro.
✨Bigote: 3 cm en foami amarillo.
✨STEP 1:
The first thing, as always, is to take a white sheet of paper and draw the idea you have in mind; In my case, as I mentioned at the beginning, I already had a train in mind, but of course, I had to decide on Christmas decorations and where to place them. So I thought of a Christmas wreath and some holly leaves, both for the train and for the driver, whose face I only wanted to make so it wouldn't look too big. Once I had the ideas ready, it was time to transfer them to the corresponding colors of foam, as I explain below:
✨Back of the train: 6 cm x 3.5 cm in red foam.
✨Front of the train: 3.8 cm x 3.5 cm in green foam.
✨Roof: 4.5 cm x 1 cm in green foam.
✨Headlight: 1.5 cm x 1 cm in yellow foam.
✨Chimney: 2.5 cm x 1 cm in gray foam and 1.5 cm in gold glitter foam.
✨Spark guard: 2 cm x 1.5 cm in red foam.
✨Wheels: 2 cm and 2.5 cm in circumference, made of black foam.
✨Center and wheel mechanism: 1 cm in circumference, made of yellow foam and 3 cm in circumference, made of gold glitter foam.
✨Crown: 4 cm in circumference, made of green foam.
✨Bow: 2 cm in circumference, made of red foam.
✨Holly leaves: 2.5 cm and 1.5 cm in circumference, made of green foam.
✨Bruises: 1 cm and 0.5 mm in circumference, made of red foam.
✨Head: 4.5 cm x 3 cm in circumference, made of cream foam.
✨Hat: 4 cm x 2 cm in circumference, made of black foam.
✨Mustache: 3 cm in circumference, made of yellow foam.
✨PASO 2:
Al estar listas todas las piezas, es momento de dar color a los bordes de cada una, con pinturas o marcadores, y con ayuda de un pañito difuminamos. Recuerden utilizar colores que hagan contraste o un tono más oscuro que el de cada pieza. En mi caso, en la mayoría de las piezas del tren, utilicé un color negro y, para las decoraciones, un color más oscuro. Al estar secas las piezas, es el momento de dar detalles más específicos, como definir al tren, más algunas decoraciones extras y al gusto, como también dibujar el rostro del conductor.
✨STEP 2:
Once all the pieces are ready, it's time to color the edges of each one with paints or markers, and blend them with a cloth. Remember to use contrasting colors or a shade darker than the color of each piece. In my case, I used black for most of the train pieces and a darker color for the decorations. Once the pieces were dry, it was time to add more specific details, such as defining the train, adding extra decorations as desired, and drawing the conductor's face.
✨PASO 3:
Ahora es momento de pegar las piezas; en este caso, comencé por el tren, pues tenía demasiadas piezas, grandes y pequeñas, así que empecé de abajo para arriba, pegando primero la parte trasera, delantera, seguido del faro, la chimenea, el parachispas, seguido las ruedas, su mecanismo y, por último, las decoraciones.
✨STEP 3:
Now it's time to glue the pieces together. In this case, I started with the train because I had so many pieces, both large and small, so I began from the bottom up, gluing the back, then the front, followed by the headlight, the chimney, the spark arrestor, then the wheels, their mechanism, and finally the decorations.
✨PASO 4:
Luego, pegue las piezas del conductor, comenzando por cabeza, sombrero y, por último, los pequeños detalles que son las hojas de acebo y el bigote. Además, di puntos de luz con pintura blanca a ambas piezas y pegué los imanes en la parte trasera de las decoraciones.
✨STEP 4:
Next, I glued on the conductor's pieces, starting with the head, hat, and finally the small details: the holly leaves and the mustache. I also added highlights with white paint to both pieces and glued the magnets to the back of the decorations.
✨Así es como pueden elaborar esta linda decoración para la nevera. Espero que les haya gustado; me esforcé en que quedara realmente lindo, jaja, pues al tener tantas piezas pequeñas, pensé que no lo iba a lograr, jaja, pero ya saben que me encanta elaborar estas mini decoraciones. Espero que les haya gustado la decoración y se animen a elaborarla.
❤️Hasta la próxima publicación.
✨That's how you can make this cute refrigerator decoration. I hope you liked it! I really tried my best to make it look cute, haha, because with so many small pieces, I thought I wouldn't be able to do it, haha, but you know how much I love making these mini decorations. I hope you liked the decoration and are inspired to make it yourselves.
❤️Until the next post.
✨RESULTADO: | ✨RESULT:
!TE DESEO UN GRAN DÏA¡
Todas las fotografías son de mi propiedad.
Separador y Fotos editadas en Canva
!I WISH YOU A GOOD DAY
All photographs are my property.
Photos edited in Canva