A recycled ice cream container is the basis of this project, to make a Product Organizer, as it is so firm it allows to move from one side to another several beauty products easily and at the same time beautifies the space.
Un envase de helado reciclado es la base de este proyecto, para realizar un Organizador de Productos, ya que al ser tan firme permite movilizar de un lado a otro varios productos de belleza de forma fácil y al mismo tiempo embellece el espacio.
My daughters use the social bathroom that is in a hallway of our house, and they like to have in their rooms, their beauty products for facial cleansing, when they go to perform their nightly routines they take the products they are going to use in their hands. So, today I thought of making it easier for them to move the products with this Organizer, which is also personalized with the colors that one of them likes, I will make another one like it but with other colors.
I show you through this Tutorial how I made it with very few materials... join me!
Mis hijas utilizan el baño social que queda en un pasillo de nuestra casa, y a ellas les gusta tener en sus habitaciones, sus productos de belleza para realizar limpieza del rostro, cuando van a realizarse sus rutinas nocturnas se llevan los productos que van a utilizar en sus manos. Entonces, hoy pensé en facilitarles ese traslado de productos con este Organizador, que además está personalizado con los colores que le gusta a una de ellas, ya me tocará realizar otro igual pero con otros colores.
Te enseño a través de este Tutorial como lo hice con muy pocos materiales... acompáñame
- A strip of 63cms by 5cms of sky canvas
- One 63 cm by 20 cm strip of fabric
- Two rectangles of recycled cardboard
- A recycled plastic container
- Hot silicone gun
- Scissors
- Una tira de 63cms por 5cms de loneta sky
- Una tira de tela de 63cms por 20cms
- Dos rectángulo de cartón reciclado
- Un envase de plástico reciclado
- Pistola de silicón caliente
- Tijera
I start by placing the canvas tape on the edge of the plastic container using hot silicone. Preferably I start on one side.
Empiezo colocando la cinta de loneta en el borde del envase plástico utilizando para ello el silicón caliente. Preferiblemente empiezo por un costado.
I continue gluing the strip around the container, until I reach its beginning where I glue a little bit on top and then trim the excess.
Continúo pegando la tira alrededor del envase, hasta llegar a su inicio donde pego un poco encima y luego recorto el exceso.
As follows:
Quedando de la siguiente forma:
Now I am going to glue the piece of fabric that I cut with the same length, and as width I considered to fit in the container.
Ahora voy a pegar la pieza de tela que corté con el mismo largo, y como ancho consideré que entrara en el envase.
I place the fabric right to right with the strip already glued, and apply the hot silicone on the edge of the latter, so that they are joined internally and no gaps will be noticeable. I do it all around, until I reach the beginning again.
Coloco derecho con derecho de la tela con la tira ya pegada, y aplico el silicón caliente sobre el borde de ésta última, de manera que queden unidas internamente y no se vaya a notar ningún vacío. Lo hago a todo su alrededor, hasta llegar a su inicio nuevamente.
At the beginning I will glue both ends of the fabric with hot silicone, so that it is well closed, it is as if the fabrics were sewn but instead of with needle and thread, it is done with hot silicone.
Al llegar al inicio voy a pegar ambos extremos de la tela con el silicón caliente, de manera que quede bien cerrado, es como si se cosieran las telas pero en lugar de con aguja e hilo, se realiza con silicón caliente.
In the following collage you can see how I place the hot silicone on one end and then simply glue them to the end.
En el siguiente collage se aprecia cómo coloco el silicón caliente en un extremo y luego simplemente las pego hasta el final.
The result is as follows:
Quedando de esta forma:
Now I pull up the fabric so that its right side is exposed on the outside of the container, and you can see that the seams look neat.
Ahora subo hacia arriba la tela, de manera que quede expuesto su derecho en la parte externa del envase, y se aprecia ver que las uniones se ven prolijas.
When I get to spread the fabric all the way up, now I put it in the container, and of course the whole right side of the fabric is exposed. I place the fabric at the bottom of the container.
Al llegar a extender toda la tela hacia arriba, ahora la meto en el envase, y por supuesto que queda todo el derecho de la tela expuesto. Acomodo en el fondo del envase la tela.
I prepare the two pieces of recycled cardboard, for this I consider the shape of the container, I can do by placing the cardboard in the container and cutting out its shape with a scissors, rounding the tips or corners.
Preparo las dos piezas de cartón reciclado, para ello considero la forma del envase, puedo hacer colocando el cartón en el envase y recortando su forma con una tijera, redondeando las puntas o esquinas.
I line both pieces of cardboard with the fabric, using hot silicone. I glue the rounded edges well, and lining only one side of each cardboard is enough.
Ambas piezas de cartón las forro con la tela, utilizando el silicón caliente. Pego bien los bordes redondeados, y con forrar una sola cara de cada cartón es suficiente.
This is what the lined cartons look like.
Se ven así los cartones forrados.
I put one of the cartons into the container and it was exactly right, it was not even necessary to apply hot silicone, it was just right.
Uno de los cartones lo introduzco en el envase y quedó bien exacto, ni siquiera fue necesario aplicar silicón caliente, quedó justo.
I glue the other cardboard to the outside bottom of the container, so that it looks good. Remember that the products or crafts we make must look good on all sides.
El otro cartón a forrado lo pego en el fondo externo del envase, para que se vea bien. Recuerden que los productos o manualidades que realizamos deben verse bien por todos su lados.
This is how this project is ready, the container is ideal for transporting the products that my daughter uses in her skin care routine and other little things.
Así queda listo este proyecto, queda bien firme el envase es ideal para transportar los productos que mi hija utiliza en su rutina de skin care y otras cositas.
I also really liked the color scheme, and she liked it a lot too, it's in tune with everything in her room.
Además me gustó mucha la combinación de los colores, y a ella también le gustó mucho, tiene sintonía con todas las cosas de su cuarto.
And the products remain stable, you will no longer have to juggle to move your products to the bathroom and then to the bedroom, it was perfect for what you need.
Y los productos quedan estables, ya no va a tener que hacer malabares para trasladar sus productos al baño y luego a la habitación, quedó perfecto para lo que se necesita.
I hope you liked this project, now every recycled container can have a new and beautiful new purpose, you have to think about its possibilities and take advantage of them.
Thank you for reading my tutorial and I cordially invite you to my next publication.
Deseo que les haya gustado este proyecto, ahora cada envase reciclado puede tener un nuevo y bonito nuevo propósito, hay que pensar en sus posibilidades y aprovecharlas.
Te agradezco por haber leído mi tutorial y te invito cordialmente a mi próxima publicación.
---------- ❤️❤️❤️❤️ ----------
I took the photos with my Redmi Note 8 phone
Apps I used:
Canva for the Cover
Inshot for the Collage
I used Deepl Translate
My social networks:
Discord: YennysYaneth#0189
Twitter:
Instagram:
---------- ❤️❤️❤️❤️ ----------
Las fotos las tomé con mi teléfono Redmi Note 8
Apps que utilicé:
Canva para la Portada
Inshot para los Collage
Utilicé el Traductor Deepl
Mi redes sociales:
Discord: YennysYaneth#0189
Twitter:
Instagram: