Hola hermosa comunidad Hive Diy, deseo que estén maravillosamente bien, yo también me encuentro súper bien, llena de mucha emoción por la llegada de la navidad...🎄 🙏🏻
Soy una súper entusiasta de la navidad me encantan todas los adornos, luces, guirnaldas y este año me animé a realizar mis propias decoraciones Navideñas es como mi pequeño proyecto y me tiene súper emocionada 🎄 Hace unos días atrás les mostré como realice unos Arbolitos con carton, estambre rojo y foami (me tienen enamorada) y ahora les quiero mostrar cómo realice estás hermosas coronas navideñas que me tienen aún más enamoradas utilizando los mismos materiales para así seguir la misma línea en cuanto a la decoración.
MATERIALES: ✂️
✂️ Cartón
✂️ Estambre (rojo y verde)
✂️ Foami
✂️Silicón Frío
✂️ Lápiz y Tijeras
PASO A PASO:
✂️ Realizamos nuestro aro de cartón el mío tiene aproximadamente 9 cm de diámetro, con ayuda de un lápiz vamos a marcar los segmentos para enrollando el estambre en partes iguales. Yo hice 6 segmentos (para 3 verdes y 3 rojos)
✂️ Vamos a recortar el estambre que se va a utilizar para cada segmento, luego tomamos el aro y por la parte de atrás se coloca un punto de silicón para pegar un extremo del estambre, esperamos unos minutos a qué seque y procedemos a enrollarlo poco a poco, tratando que quede lo más ajustado posible, al llegar al final del estambre se coloca de nuevo un punto de silicón para pegarlo (siempre tratando de que la pega quedé por la parte de atrás del aro).
✂️ Así vamos a ir haciendo hasta finalizar todo el aro, intercalando los colores rojo verde. ❤️💚
✂️ Con el Estambre haremos las cuerditas que utilizaremos para guindarlas en el arbolito, las realizamos del tamaño que más nos funcione y luego la pegamos por la parte de atrás del aro. también yo le agregué un toque extra con unas estrellitas que conseguí guardadas aquí en la casa, puedes colocarle unas mostacillas o unas perlitas o simplemente dejarlas así...
✂️ Ahora realizaremos el lazo, este tal vez pueda ser el paso un poquito más complicado (para mí lo fue ya que era mi primera vez realizando este tipo de lazo) pero una vez que haces el primero los demás son súper fácil y rápidos de hacer..
✂️ Para el lazo necesitamos un cuadrado de foami de 7cm x 7cm (yo hice un molde, para no estar midiendo a cada rato). Luego lo doblaremos formando un triángulo, presionamos bien para marcar la línea ( se hace de ambos lados) luego recortaremos por esas marcas de líneas dejando unos centímetros sin recortar (se hace con los 4 lados).
✂️ Ahora colocaremos silicón en dos de las puntas del rectángulo por la parte de atrás y esas dos punticas no las traemos hacia el centro del cuadrado ahí formaremos uno de los lados del lazo (esperamos unos minutos a qué seque) y repetimos la misma operación del lado contrario aquí inmediatamente se notará el lazo formado.
Nos quedan dos lados un lado cortaremos en el centro en forma de triángulo, esto nos dará la forma de la cinta que va por detrás, el otro lado que nos queda será para hacer la cinta del medio, para esto recortaremos ambos lados dejando un rectángulo del ancho que deseas. Ahora procedemos a pegar, el lado de las dos cintas lo volteamos hacia el lado escarchado y pegamos, la cinta la usamos para envolver al lazo, ajustamos todo y esperamos a que seque. Tal cual como lo muestro en las imágenes...
✂️ Así queda listo el lazo de foami, se produce a pegar en las coronas y terminamos. Quedan super bellas 🤩 a mi me tienen enamoradas. No puedo esperar a colocarlas en el arbolito de Navidad 🎄
Amigos de Hive DIY espero que les guste este paso a paso, lo realice con mucho cariño para ustedes. deseando que se animen a realizarlas en casa, son super sencillas y quedan hermosas, lo que puede ser un poquito más complejo son los lazos pero eso también los puedes cambiar por lazos de cintas e igual quedan preciosos, también si desean pueden hacer las coronas en un solo color ya eso es su gusto ... ❤️💚
Gracias por Leer ☺️
Besos y Feliz Día 💋
Portada: editada con Canva
Fotografía: tomadas con mi teléfono Redmi 10
Traductor: DeepL
ENGLISH VERSION 🎄
Hello beautiful Hive Diy community, I hope you are doing wonderfully well, I am also super well, full of excitement for the arrival of Christmas...🎄 🙏🏻
I am a super enthusiastic about Christmas I love all the ornaments, lights, garlands and this year I decided to make my own Christmas decorations is like my little project and I'm super excited 🎄 A few days ago I showed you how I made some Christmas trees with cardboard, red yarn and foami (I'm in love) and now I want to show you how I made these beautiful Christmas wreaths that have me even more in love using the same materials to follow the same line in terms of decoration.
MATERIALS: ✂️
✂️ Cardboard
✂️ yarn (red and green)
✂️ Foami
✂️Silicón Cold
✂️ Pencil and Scissors
STEP BY STEP:
✂️ We make our cardboard ring, mine is approximately 9 cm in diameter, with the help of a pencil we are going to mark the segments to roll the yarn in equal parts. I made 6 segments (for 3 green and 3 red).
✂️ We are going to cut the yarn to be used for each segment, then we take the hoop and place a silicone dot on the back to glue one end of the yarn, we wait a few minutes for it to dry and proceed to roll it up little by little, trying to make it as tight as possible, when we reach the end of the yarn we place again a silicone dot to glue it (always trying to keep the glue on the back of the hoop).
✂️ This is how we are going to do it until we finish the whole hoop, alternating the red and green colors. ❤️💚
✂️ With the yarn we will make the strings that we will use to hang them on the tree, we make them in the size that works best for us and then we glue them on the back of the hoop. I also added an extra touch with some little stars that I got saved here at home, you can put some beads or pearls or just leave them like that...
✂️ Now we will make the bow, this might be the most complicated step (for me it was since it was my first time making this kind of bow) but once you do the first one the others are super easy and quick to do...
✂️ For the bow we need a square of foami of 7cm x 7cm (I made a mold, so as not to be measuring all the time). Then we will fold it forming a triangle, press well to mark the line (it is done on both sides) then we will cut along those line marks leaving a few centimeters without cutting (it is done with the 4 sides).
✂️ Now we will place silicone on two of the ends of the rectangle on the back side and those two points we do not bring them to the center of the square there we will form one of the sides of the loop (wait a few minutes to dry) and repeat the same operation on the opposite side here you will immediately notice the loop formed.
We have two sides left, one side we will cut in the center in the shape of a triangle, this will give us the shape of the ribbon that goes behind, the other side we have left will be to make the middle ribbon, for this we will cut both sides leaving a rectangle of the width you want. Now we proceed to glue, the side of the two ribbons we turn it to the frosted side and glue, we use the ribbon to wrap the bow, we adjust everything and wait for it to dry. Just as I show in the pictures...
✂️ This way the foami ribbon is ready, we glue it on the wreaths and we are done. They are super beautiful 🤩 I'm in love with them. I can't wait to put them on the Christmas tree 🎄.
Friends of Hive DIY I hope you like this step by step, I made it with love for you. wishing you are encouraged to make them at home, they are super simple and are beautiful, what can be a little more complex are the bows but you can also change them for ribbons and they are just as beautiful, also if you want you can make the wreaths in one color and that's your taste ... ❤️💚
Thanks for reading ☺️
Kisses and Happy Day 💋
Cover: edited with Canva.
Photo: taken with my Redmi 10 phone
Translator: DeepL