A wonderful day to you hive & holozing 😍, I'm 
My process always starts by uploading all the images on canva .com, it is pretty useful for persons like me who dont have technical skills on professional software like photoshop.
💖 For this design i try different design with the holozing letters where half of it is in front of Wrackoo while the upper half letters are on the back. I also added the Zing logo at the back and while doing that i added the Grass Raccoon letters at the bottom
💖 My creative side burns some brain cells 😆 and tried to be as meticulous as i can be.
💖 Voila the final design
💖 Design w/o background
🔧 Some Process with the Heat Press (Note : the process is the same as my last post for the heat press)
💖Now i start on the heat press process. 🎨 For this process i prepared the heat press machine first and set the temperature at 210 and set the timer for 35 seconds. I made sure the plug is stable so it does not delay my work. I prepared the printed Holozing shirt design and an old cotton spandex, shirt subli prints works best or better with high polyester fabrics.
💖I just waited for the heatpress to reach at least 195 temp so that i could start the process. Do not ever forget to pre-heat the fabric you will be printing the design so that it will not deform the design make sure that is very clean and ready for transfer. Right after that place the printed subli paper , printing it should be mirrored because that is how you place the paper right facing the fabric so it is placed like a mirror. Made sure you place it plenty-stable.
💖Place a teflon sheet over that fabric and over the paper. I forgot to buy a heat resistant paper so the paper will not move, i hope i remember to purchase it online later. Then we are ready to pull the lever and press our holozing design print.
💖 Another outfit Check with my nephews!
