🔸Sin más que añadir, a continuación los dejo con el paso a paso:
Good afternoon, holozing friends! As always, I'm happy to stop by again to share a cute magnet decoration idea inspired by Chirple and his radiant evolution. I hadn't made a creature with one of his evolutions together before, so I thought it would be nice to make them into magnets, and in this case, it's a normal Chirple flying with his radiant evolution waving, haha. I thought it was a cute and a little funny idea, so I thought I'd create it and share it with you.
🔸Without more to add, then I leave you with the step by step:
♥️ESPERO QUE TE GUSTE,
¡Empecemos!
♥️I HOPE YOU LIKE IT,
Let's start!
✂️ MATERIALES | ✂️ MATERIALS
- Foami escarchado verde y azul.
- Foami verde, amarillo, rojo, naranja, azul y crema.
- Pinturas y marcadores.
- Hoja blanca.
- Pegamento.
- Regla.
- Tijeras.
- Lápiz.
- Green and blue frosted foam.
- Green, yellow, red, orange, blue, and cream foam.
- Paints and markers.
- White paper.
- Glue.
- Ruler.
- Scissors.
- Pencil.
PROCEDIMIENTO | PROCESS
- ✨ PASO 1:
Lo primero que hice fue el diseño de cada uno, así que como dije al inicio, a Chirple normal volando y con su evolución radiante saludando, además los hice con picos diferentes, según lo que estaban haciendo. Al tener las ideas listas de cada uno en la hoja blanca, transferí cada una de las piezas a los colores correspondientes de foami, como explico a continuación:
✂️Para Chirple normal:
✨Cabeza de 3 cm y alas de 2 cm en foami verde.
✨Alas de 1.2 cm en foami escarchado verde.
✨Pico de 2 cm en foami amarillo.
✨Cresta de 1 cm en foami naranja.
✨Cuerpo de 2.5 cm en foami crema.
✨Cola de 1.5 cm en foami naranja y parte interior en foami rojo.
✂️Para Chirple radiante:
✨Cabeza de 3 cm y ala de 2 cm en foami azul.
✨Ala de 1.2 cm en foami escarchado azul.
✨Pico de 1.5 cm en foami amarillo.
✨Cresta de 1 cm en foami amarillo.
✨Cuerpo de 3 cm en foami crema.
✨Cola de 1.5 cm en foami amarillo.
- ✨ STEP 1:
The first thing I did was the design for each one, so as I said at the beginning, a normal Chirple flying with his radiant evolution waving. I also made them with different beaks, depending on what they were doing. Once I had everyone's ideas ready on the white sheet, I transferred each of the pieces to the corresponding colors of foam, as explained below:
✂️For regular Chirple:
✨3 cm head and 2 cm wings in green foam.
✨1.2 cm wings in green frosted foam.
✨2 cm beak in yellow foam.
✨1 cm crest in orange foam.
✨2.5 cm body in cream foam.
✨1.5 cm tail in orange foam and inner part in red foam.
✂️For radiant Chirple:
✨3 cm head and 2 cm wings in blue foam.
✨1.2 cm wings in blue frosted foam.
✨1.5 cm beak in yellow foam.
✨1 cm crest in yellow foam.
✨3 cm body in cream foam.
✨1.5 cm tail in yellow foam.
- ✨ PASO 2:
Al tener todas las piezas listas, es momento de dar color a los bordes con ayuda de pinturas o marcadores y difuminamos suavemente con ayuda de un pañito. Al estar seco, damos más detalles con las mismas pinturas o marcadores para las sombras o degradados a la cabeza y pico. Por otra parte, di más detalles al pico y cuerpo con marcador negro. Pinté el ojo con blanco, dejé secar y pinté el centro con marcador negro.
- ✨ STEP 2:
Once all the pieces are ready, it's time to color the edges with paints or markers and gently blend them with a cloth. Once dry, I added more details with the same paints or markers for the shading or gradients on the head and beak. I also added more details to the beak and body with a black marker. I colored the eye with white, let it dry, and then colored the center with a black marker.
- ✨ PASO 3:
Al estar totalmente secas todas las piezas, es momento de pegar, hasta formar a cada uno, comenzando por la cabeza, cuerpo y, por último, las alas y colas.
- ✨ STEP 3:
Once all the pieces are completely dry, it's time to glue them together, starting with the head, body, and finally the wings and tails.
- ✨ PASO 4:
Para finalizar, tomé el imán, lo corté en dos partes porque era muy grande y los pegué en la parte trasera de cada una de las criaturas.
- ✨ STEP 4:
To finish, I took the magnet, cut it into two pieces because it was too large, and glued them to the back of each creature.
❤️ Hasta la próxima publicación.
❤️ Until the next post.
Todas las fotografías son de mi propiedad.
Separador y Fotos editadas en Canva
All photographs are my property.
Photos edited in Canva