Hi all Home automation enthuiasts... You're probably using Home Assistant if you are into Home automation.
I just started witha Rasp Pi 4.0 rev B. And flashed the OS as per instructions withing the LAN cable to a router.
But after setting up for awhile, I wanted to add Wifi support, I can seem to find where to configure. Many of the help online pointed to using a PC or Mac and SD card reader , to set a file in the SD card image... upon boot up, the wifi settings will take effect.
However, I do not have a SD card reader handy now.. and I wanted to setup the wifi....
I have finally found a easy way to do it... in headless mode..
the PC can SSH into the Rasp Pi (
Once you can SSH into the Rasp Pi... using a simple command
nmtui
and you will get this app running
This is nice and Sweet !