Hello everyone today is another great day,hope you are all doing well.
Today I bring to you the continuation of how to build an inverter, previously I told you that I would be bringing more of this work so here I am,If you want to understand better about this inverter building you can check in the stage one.
Today we started building the stage two and in building this stage two we need some components which are : Integrated circuit (IC), capacitors,resistors.
Firstly we start by connecting our integrated circuit(IC) which is the black rectangular item in the picture, to our motherboard and we must make sure it is facing our regulator after that we sold the IC to the motherboard.
Secondly we connect our variable resistor which is the blue-white coloured in the pics below,to the motherboard taking sides with the IC and then we solder its legs to the motherboard and also in the same procedure we take our ceramic capacitor which looks green in colour and sold it also to the motherboard siding with the variable resistor.
Then by the right hand side is where we connect our fixed resistor and solder it with our motherboard as well.
After that we are to connect our stage 1 together with the stage 2, we connect the positive output from the stage 1 with our positive output in stage 2 and vice versa for the left output connection.
This is the end of the stage 2 and we continue later with the next stage which is stage 3.