Hola y bienvenidos todos a este mi espacio preferido.
Como ya se acerca el fin de año escolar, les voy a compartir un paso a paso donde les mostraré como hacer un lindo cotillón, organizador que puedes obsequiar a ese pequeño que se esforzó y estudió mucho para ser promovido a otro grado.
Así que te invito a disfrutar de este lindo y útil tutorial, acompáñame y hagámoslo
Vamos a utilizar los siguientes materiales:
| Cartulina corrugada | Cartulina escolar |
|---|---|
| Cilindro de cartón reciclado | Foami goma eva |
| Tijera | Cinta métrica |
| Regla | Pinturas |
| Pinceles | Lápiz |
| Dibujo de graduando |
Empecemos con el Procedimiento:
- Tomar las medidas del cilindro de cartón, ancho y alto.
- Marcar las medidas tomadas en la cartulina corrugada y recortar.
- Aplicar silicón en el contorno del cilindro y pegar la cartulina, forrándolo todo.
- Remarcar el dibujo y luego transferirlo al foami o goma eva, frotando el papel con las orejas de la tijera cada pieza en el color correspondiente.
- Recortar todas las piezas, sombrear con pintura, mojando el pincel en la punta y luego delinear con un pincel fino, todos los rasgos de las piezas.
- Mojar en pintura marrón, la parte trasera del pincel y presionar suavemente sobre el foami para pintar los ojos y dejar secar.
- Repetir el procedimiento con pintura negra pero con un pincel más pequeño.
- Con la pintura aún húmeda pintar las pestañas con un pincel 00 o un liner y dejar secar.
- Mojar un palillo en pintura blanca y marcar puntos de luz en cada ojo.
- Pintadas todas las piezas, aplicaremos silicón a cada una y empezar a armar la figura de la graduando haciendo un poco de presión a cada pieza para que pegue bien.
- Ahora aplicar silicón a toda la figura y pegarla sobre cartulina blanca.
- Dejar secar y recortar la figura, dejando una orilla de dos o tres (2 ó 3)milímetros.
- Meter un palillo en la parte de abajo de la figura.
- Recortar dos (2) tiras de cartulina fucsia y blanco, del ancho del cilindro.
- Pegar la tira fucsia en el borde superior (parte de afuera).
- Meter la figura y pegar en la orilla.
- Luego pegar en la parte de adentro la tira blanca en el borde.
- Por último hacer un lazo y pegar al frente del cotillón.
Y así quedó de hermoso este Cotillón!
Para esta publicación utilicé etiquetas de HTLM, el texto traducido con DeepL, las fotos tomadas por mí teléfono Blu G5 y editadas con Pic Collage.
Ahora me despido deseando que haya sido de tu agrado este paso a paso.
Gracias por tu visita!
Espero tu comentario y si tienes alguna duda estoy a la orden.
Saludos!.
English
Hello and welcome everyone to this my favorite space.
As the end of the school year is approaching, I am going to share with you a step by step where I will show you how to make a nice cotillion, organizer that you can give as a gift to that little one that worked hard and studied hard to be promoted to another grade.
So I invite you to enjoy this nice and useful tutorial, come on, join me and let's do it.
We are going to use the following materials:.
| Corrugated cardboard | School cardboard |
|---|---|
| Recycled cardboard cylinder | Foami eva gum |
| Scissors | Tape measure |
| Ruler | Paints |
| Brushes | Pencil |
| Drawing of graduating class |
Let's start with the Procedure:
- Take the measurements of the cardboard cylinder, width and height.
- Mark the measurements on the corrugated cardboard and cut out.
- Apply silicone on the outline of the cylinder and glue the cardboard, lining it all over.
- Outline the drawing and then transfer it to the foami or eva rubber, rubbing the paper with the ears of the scissors on each piece in the corresponding color.
- Cut out all the pieces, shade with paint, wetting the brush on the tip and then outline with a fine brush, all the features of the pieces.
- Dip the back of the brush in brown paint and press gently on the foami to paint the eyes and let dry.
- Repeat the procedure with black paint but with a smaller brush.
- With the paint still wet, paint the eyelashes with a 00 brush or a liner and let dry.
- Dip a toothpick in white paint and mark light spots on each eye.
- Once all the pieces are painted, apply silicone to each one and begin to assemble the figure of the graduating by applying a little pressure to each piece so that it sticks well.
- Now apply silicone to the whole figure and glue it on white cardboard.
- Let it dry and cut out the figure, leaving a border of two or three (2 or 3) millimeters.
- Stick a toothpick in the bottom of the figure.
- Cut out two (2) strips of fuchsia and white cardboard, the width of the cylinder.
- Glue the fuchsia strip on the top edge (outside).
- Tuck the figure in and glue on the edge.
- Then glue the white strip on the inside edge.
- Finally make a bow and glue to the front of the cotillion.
And this is how beautiful this Cotillion turned out!
For this post I used HTLM tags, the text translated with DeepL, the photos taken by my Blu G5 phone and edited with Pic Collage.
For this post I used HTLM tags, the text translated with DeepL, the photos taken by my Blu G5 phone and edited with Pic Collage.
Now I say goodbye wishing you enjoyed this step by step.
Thanks for your visit!
I look forward to your comment and if you have any questions I am at your service.
Greetings!