Hola! saludos, primero que nada espero estén todos muy bien; hoy quiero mostrarles como hacer un porta lápiz animado.
Hello! Greetings, first of all I hope you are all very well; today I want to show you how to make an animated pencil holder.
Para empezar quiero comentarles que trabaje con material reciclable; Tales como:
To begin with, I want to tell you that I work with recyclable material; Such as:


• Disco.
• Hoja de papel blanco.
• Cartulina rosada.
• Tijera.
• Silicon caliente.
• Goma eva negra y naranja.
• Recorte de tela blanca.
• Tubos de papel higiénico.
• Lápiz.
• Regla, en mi caso usé una escuadra.
- Disc.
- Sheet of white paper.
- Pink cardboard.
- Scissor.
- Hot silicon.
- Black and orange eva rubber.
- White cloth cutout.
- Toilet paper tubes.
- Pencil.
- Ruler, in my case I used a square.
• Paso 1: Marqué con el lápiz y recorte la tela alrededor de el disco a distancia de 1cm.
• Step 1: Dial with the pencil and cut the cloth around the distance from 1cm.

• Paso 2: Pegué la tela a un lado de el disco y con las orillas restantes hice cortes en lineas y las pegué en la otra cara de el disco para que así se sostenga la tela y tenga un mejor acabado.
• Step 2: I paste the fabric to one side of the disc and with the remaining edges I made cuts in line and I peeked them on the other side of the disc so that the fabric is held and have a better finish.


• Paso 3: Marqué en la hoja de papel la forma de el disco y así hasta sacar 2 circulos para cada cara de el disco.
• Step 3: Dry on the paper sheet The shape of the disc and thus until 2 circles for each side of the disc.

• Paso 4: Pegué de ambos lados de el disco los circulos que hice con la hoja de papel.
• Step 4: I peeked on both sides of the album the circles I did with the sheet of paper.

• Paso 5: De la cartulina saque dos retazos rectangulares, ambos de 10cm e hice la forma de las orejitas de un conejo.
• Step 5: From the cardboard take two rectangular pragts, both from 10cm and made the shape of a rabbit's orejitas.




• Paso 6: Luego de cortar las orejitas en la cartulina, las coloque sobre los rectángulos de 12cm que hice en la hoja de papel y las recorte de la misma manera dejando 1cm de diferencia.
• Step 6: After cutting the orejitas into the cardboard, place them on the 12cm rectangles that I did on the sheet of paper and cut it in the same way leaving 1 cm apart.


• Paso 7: Hice dos recortes en la tela de 15cm de largo por 14cm de ancho, para luego forrar los tubos de papel higiénico.
• Step 7: I made two cuts on the fabric of 15cm long by 14cm wide, then linking the toilet paper tubes.


• Paso 8: Una vez forrados los tubos de papel higiénico, los pegue de la siguiente manera y luego los adheri al disco forrado ya antes mencionado.
• Step 8: Once the toilet paper tubes are lined, stick them as follows and then adhere them to the lined disk already mentioned above.


• Paso 9: Luego hice la forma de los ojos, nariz, bigotes y tres círculos en la goma eva naranja.
• Step 9: Then I did the shape of the eyes, nose, whiskers and three circles in the orange Eva gum.

• Paso 10: Coloque silicón a uno de los círculos naranjas de goma eva y lo peque sobre el disco y sobre este coloque la nariz de el conejito.
• Step 10: Place silicone on one of the orange eva rubber circles and paste it on the disk and on this place the nose of the bunny.

• Paso 11: Luego pegué cada ojo sobre los 2 círculos naranja restante y sobre estos las pupilas.
• Step 11: Then I glued each eye on the 2 remaining orange circles and on these the pupils.

• Paso 12: Para finalizar pegué las orejitas y bigotes e hice los dientitos de el conejo.
• Step 12: To finish, I glued the ears and whiskers and made the rabbit's teeth.

Y entre tanto pegar y pegar finalmente culmine mi divertido porta lápiz de conejo, lo hice con amor para ustedes; Gracias por su atención, que Dios los bendigas enormemente.😚
Rabbit pencil, I did it with love for you; Thank you for your attention, may God bless you enormously.😚