Hi hivers,
As you all know that from my introductory post that am a building engineer by profession with a Polytechnics and university certificate.
This is just a little work done by my workers today for a client who happens to be my uncle.
The walls has been erected before and plastering and rendering is meant to be done.
Let me take you round my wall wall plastering procedure:
- Firstly, plaster sand and cement was transported to the site.
- The plaster sand was sieved with a sieve to get a fine grain and it was later mixed cement by batch using ratio 1:5.
- The wall was first springle with water so as to enable mortal to stick to the wall.
- Mortal was applied as plaster sand to the wall and was left for sometimes,
- Then a small range was used to smooth it to even level.
- A form was dipped into the water and springle on the plaster then a jointing board was used to smoothing it.
- Another mortal was now used to deplaster it but this time, pure cement was much in it, so it was now smooth.
- And finally an industrial Brush was dipped into the water and was used on the smooth plastered wall given it the most finest finishing.
This small guy was the one serving them mortal, they brought due to no school because of coronavirus pandemic and i was surprised to see what he his doing at his age. But he really tried today
I know by now, you should be able to plaster your wall your self.
