Making a homemade Super Massager
Haciendo un Súper Masajeador casero
Greetings to all my dear readers, after disappearing for two days thanks to a problem with the internet services server, I am here again with you to share a super useful manual that will help any sore neck to overcome its ills. I will be presenting a Super Electric Massager, which in my case had a cost of 0 $.
Saludos a todos mis queridos lectores, luego de desaparecer por dos días gracias a un problema con el servidor de servicios de internet, me encuentro nuevamente acá con ustedes para compartir una manualidad súper útil, que ayudara a cualquier cuello adolorido a superar sus males. Les estaré presentado un Súper Masajeador eléctrico, que en mi caso tuvo un costo de 0 $.
After stressing a little because of the internet problem, I came up with something that would help relieve the tension in my sore neck, that's when I came up with the idea of using something that can go through my skin without generating friction and at the same time "vibrate" enough to relax me.
Luego de estresarme un poco por el problema del internet, se me ocurrió realizar algo que fuera de ayuda para aliviar la tensión de mi adolorido cuello, es entonces cuando se me ocurre la idea de utilizar algo que pueda pasar por mi piel sin que genere fricción y al mismo tiempo “Vibre” lo suficiente para relajarme.
Finally after searching and searching among materials I got the package of a roll-on deodorant and a small printing engine the base materials for this relaxing massager.
Finalmente luego de buscar y buscar entre materiales conseguí el envase de un desodorante roll-on y un pequeño motor impresora los materiales bases para este relajante masajeador.
The materials and tools I used were:
- Roll-on container
- Printer engine
- Something that works as a counterweight (in my case I used an internal part of an outlet, which had a screw in it)
- 5V current transformer (from an old cell phone)
- Silicone
- Tin
- tweezers
- cutter
- Caution
- Much love!!
Los materiales y herramientas que use fueron:
- Envase de roll-on
- Motor de impresora
- Algo que funcione como contrapeso (en mi caso use una pieza interna de un tomacorriente, que tenía tornillo)
- Transformador de corriente de 5V (de un celular viejo)
- Silicona
- Estaño
- pinzas
- cúter
- Cautín
- Mucho cariño!!
This has been the post of the day! I hope it is to everyone's liking and that this manual is useful and can serve you in your day-to-day life. I recommend it because it is very powerful and does not harm the skin. See you in the next post wants you
Este ha sido el post del día! Espero que sea del agrado de todos y sea de provecho esta manualidad y pueda servirles en su día a día, se los recomiendo ya que es muy potente y no maltrata la piel. Nos vemos en el próximo post los quiere
The photographs are my own and were taken by me with a sony cybershot DSC-S2000 and were edited in powerpoint.
Las fotografías son de mi autoría y fueron tomadas por mí con una camara sony cybershot DSC-S2000 y se editaron en powerpoint.
The Step by Step Gif was made by me in AdobePhotoshop CC2014.
El Gif de Paso a Paso fue realizado por mi en AdobePhotoshop CC2014.
The image of HIVE used on the cover (initial image) was taken from here:
La imagen de HIVE usada en la portada (imagen inicial) fue tomada de acá: