DIY Shorts: Solera and End Block [ASMR]

---

Hello there, 3speakers!

The second step during the assembly of the instrument is to get the combination of sound board and neck on the solera mould. When we do, we add the wooden squares around the perimeter of the sound board. We also fix the whole thing to the mould using some wooden jigs. The next step is to prepare the end block. We need to cut it and smooth both sides. Then, we give it a bevel on each end on the side that will go towards the inner part of the instrument.

Finally, we glue it in place!

Step	Name
1	Some Assembly Required
2	Sound Board in Progress
3	Half-baked Sound board
4	Shape of a Sound Board
5	A Neck Begins
6	Head Stock Glue Up
7	Base of the Heel
8	Shape of the Heel
9	Ears on the headstock
10	Veneer and Holes
11	Back in 3 parts
12	Joint Reinforcement
13	Bars of Back
14	Assemble this First

• _{Photos and Video 📹 📷: Redmi Note 13}

• _{Thumbnail 🖼️: Canva.}

• _{Editing 🎬: Adobe Audition CS6, Capcut.}

Follow me on Instagram for enquires and commission.

If you'd like to help the workshop grow, you can make a donation here.

You can find me at discord as bertrayo#1763

---

▶️ 3Speak