The main grid on which masking elements are applied, I recently learned to make. I have already made my first base mesh, on which the masking elements have already been applied. We were taught to weave fishermen's nets. They showed the principle and the best knot that does not ride on the thread and tightens well, which makes the net strong and even.
Основна сітка на яку, наносяться маскувальні елементи нещодавно навчився робити. Я вже зробив свою першу сітку основу, на яку вже почали наносити елементи маскування. Навчили нас плести сітки рибаки. Вони показали принцип та найкращий вузол, який не їздить по нитці й гарно затягується, що робить сітку міцною та рівномірною.
Anyone can learn to weave a net, but attention and monotonous mechanical work can get boring quickly. It is also difficult to weave the net physically, because the load is heavy on the hands of both hands and fingers. It is also important to be focused and attentive, because a mistake can have a bad effect on the quality of the net and you will have to unbraid and then re-braid, which is a very difficult job.
Навчитися плести сітку може кожен, але уважність та механічна робота одноманітна може набриднути швидко. Також важко плести сітку фізично, бо навантаження велике йде на кисті обох рук та пальці.Важливо й бути зосередженим та уважним, адже помилка може погано вплинути на якість сітки та доведеться розплітати, а потім знову заплітати, що дуже є складною роботою.
In order to weave a net, you need a shuttlecock and kapron thread.
A shuttle is a metal device on which threads are wound and then knots are woven with it.
You also need a wooden or plastic board that has the appropriate size of the cell in the grid. The size of the cell woven in the mesh corresponds to the size of the board on which the mesh is woven.
Для того, щоб сплести сітку потрібні челнок та нитка капронова.
Челнок - це металевий пристрій на який накручують нитки та потім ним плетуть вузли.
Також потрібна дощечка дерев'яна чи пластмасова, яка має відповідний розмір клітинки у сітці. Розмір клітини сплетеної у сітці відповідає розміру дощечки на, яку заплітається сітка.
A certain number of required grid cells are woven onto the board, then they are released from the board and new ones are woven, combining them with the ones you have already woven.
На дошку заплітається певна кількість потрібних клітинок сітки, потім вони розпускаються з дощечки та плетуться нові поєднуючи їх з тими, що ви вже заплели.
It is important to tighten the knots tightly, because then it will be difficult to understand which knot has unraveled during the work, and it will take a lot of time to solve the problem, not the weaving itself. Tightening the knot should be sharp and strong, so that the knot even sounds like a small shot.
It is important to weave the net so that the weaving process itself is in tension. If knots are braided in the tension, then the size will be the same in all cells, and the mesh will be uniform and beautiful.
Важливо міцно затягувати вузли, адже потім важко буде зрозуміти який вузол розплівся у процесі роботи, й часу піде багато на розв'язання проблеми, а не саме плетіння. Затягування вузла має бути різким та сильним, щоб вузол аж прозвучав маленьким пострілом.
Важливо, заплітати сітку так, щоб в натяжку був сам процес плетіння. Якщо в натяжку відбувається заплітання вузлів, то розмір буде однаковим у всіх клітинах, а сітка буде рівномірна й гарна.
The size of the grid is calculated by the width and length, as well as the size of the cells in it. Meshes can then be stitched or tied with knots for a large size.
Розмір сітки вираховується шириною та довжиною, а також розміром клітинок у ній. Сітки потім для великого розміру можна зшивати, чи звязати вузлами.