Hello everyone 😃 Happy and Blessed day 🤗, I wish you are super good shining, full of good health and positive energies to continue growing, innovating and exceeding yourself! On this beautiful day I have made a step-by-step tutorial, explained how I always do it through a sequence of images, and to help you understand better I will leave you a video that will help you in the process, it is a small, very simple tendril basic of
manufacturer, which looks super original 😄🙏
Materiales: Hilo Soutache o trenza de Rayon, 2 Apliques cuadrados de 1 centimetro de diámetro, Silicon Liquido, Tela POP o tela de bata de cirujanos, Cuero o tela gruesa, encendedor, tijera, pinza punta fina, base de Zarcillo plana de 0,4 milímetros, 12 apliques redondos de 0,3 milímetros de diámetro.
Materials: Soutache thread or Rayon braid, 2 Square Appliques of 1 centimeter in diameter, Liquid Silicon, POP cloth or surgeons gown cloth, Leather or thick cloth, lighter, scissors, fine point tweezers, 0 flat tendril base, 4 millimeters, 12 round wall lights 0.3 millimeters in diameter.
Step 1: Fill your life with encouragement and positive energy. It is time to start, take a piece of pop cloth and in the center place a little liquid silicone, with care and patience we will paste the Apply Square setting of 1 centimeter in diameter, place a little more Liquid Silicon around the square applique and cut 4 strands of Soutache or Rayon braid of approximately 12 centimeters long each, now with the help of the fine point tweezers we will glue 2 covering the stone as you can see in the photographs 😝
Step 2: In this step we are going to use the round appliques of 0.3 millimeters in diameter, in the upper part where the threads rise you are going to place a little Liquid silicone just where the end of the Point of the square appliqué as I show you in the photo, with the help of the tweezers, place the round appliqué, and turn the thread as wrapping the appliqué, mark where the excess thread is and cut the excess thread with the scissors, which the ends with the lighter At the end of this part, you are going to lift the piece a little and with the help of the tweezers, insert the ends that you just burned from below, you are going to repeat this process on the other side.
Step 3: At this stage we place more liquid silicon around the piece and we will glue the third thread performing the same Process as the previous step, at the end repeat the same process with a fourth thread carefully not to dirty the piece on top for a better presentation 💞
Step 4: When you finish the previous step, carefully cut the excess fabric, when you finish cutting it, pass the lighter flame throughout the piece to seal the threads, then on the back place a little Liquid silicone and paste the base of Zarcillo, let it dry until it is fixed, take a piece of leather or thick cloth, spread liquid silicone on the back of the Zarcillo and stick it on the leather, insert the tip of the base of Zarcillo that pierce the leather, when finished cut the rest and in this way we have finished I hope it is to your total liking you can guide you with the photos and with the video that I leave you here below. Thank you in advance 😊
Autoría del texto y todas las imágenes: @Marleyn , La edición de las imágenes las realicé yo misma, Por favor no Utilices mis fotos sin mi autorización, edites ni re-publiques mi material ¿Deseas ponerte en contacto conmigo? Escríbeme:
Correo electronico: Marleynl123@gmail.con
Discord #Marleyn#7821
Twitter:
Imstagran: @MarleynSoutache
YouTube: https://youtube.com/c/marleynlealramos
Facebook:
Authorship of the text and all the images: @Marleyn, I did the editing of the images myself, Please do not use my photos without my authorization, edit or republish my material Do you want to contact me? Write me:
Email: Marleynl123@gmail.con
Discord #Marleyn#7821
Twitter:
Imstagran: @MarleynSoutache
YouTube: https://youtube.com/c/marleynlealramos
Facebook:
To all my readers I am very grateful, because you are the one who reads me and supports me, you are your reader friend who gives life and impulse to my creative mind, I feel grateful to you.
