Dear Hivers

How to make a mini vacuum cleaner seems to be one of the results of technological developments that are in great demand. A vacuum cleaner can be used to clean various furniture, carpets or house floors so that they are free from dust.

Dust is a very common problem at home and is difficult to clean because the particles are very small. Now a vacuum cleaner made from scrap materials has been created and is easy to make independently.

The way to make it is not difficult but can work effectively like a vacuum cleaner that is bought and sold.

How to make a practical mini vacuum cleaner.

Having used items at home that are getting dirty can actually be used as a mini vacuum cleaner. Curious? Here is a more detailed explanation of how to make a vacuum cleaner from used goods:

The tools and materials needed to make a mini vacuum cleaner include:

• Motorcycle battery that is still on
• Glue
• Just enough thin cloth for the filter
• Used cans
• Mini dynamo that is still alive
• Bottle used mineral water knife
• Scissor
• Nail
• Vacuum hose
• Hook wire

Step by Step guide.

After preparing all the tools and materials above, the steps for making a mini vacuum cleaner are as follows:

• How to make your own vacuum cleaner begins by cutting a medium sized bottle of mineral water into two pieces. The bottom part of the mineral water bottle was made several holes with nails. Set aside.

• Then cut the can with special scissors to form a circle with a diameter or diameter equal to the diameter of the used mineral water bottle.

• After that, make a propeller with the circle of the tin that has been made. Making a propeller is done by cutting the circle of the tin with scissors or a special cutter for cans made of a fairly hard material.

• Attach the propeller from the used can to the dynamo by making a small hole then place it into the used mineral water bottle that has been made a hole at the bottom.

• Put on a thin cloth that has been prepared which can work as a filter or filter for dust and dirt that the tool sucks up later. Installation is done with special glue that has been provided.

• Also glue the suction hose that is connected through the top of the bottle of mineral water. This hose will later be used for the passage of dust or small dirt that sticks to the carpet or furniture being cleaned.

• Also attach the cable to connect the dynamo to the battery as a power source.

• Make one more bottom mineral bottle with the upper part of the used mineral water bottle with a wire as a hook.

• Attach a handle or handle that can be made from another used bottle.

• Add accessories such as ribbons or cloth attachments as decorations to make the mini vacuum cleaner look more attractive. A mini vacuum cleaner or vacuum cleaner is ready to use.

• The way this vacuum cleaner works is the same as a vacuum cleaner in general. It's just that the suction power is smaller. However, the size of the vacuum cleaner can be adjusted by adjusting the strength or voltage of the battery used.

If you can clean dust and fine dirt at home with simple homemade tools why spend a lot of money to buy a vacuum cleaner? Take a few steps how to make a practical and efficient mini vacuum cleaner above! If you like my DIY project write in a comment.

Image Credit : 1 2