Hello dear community of Architecture + Design contact with nature is something I love, so creating outdoor spaces to enjoy them is something I am passionate about. VIDA VERDE is in the middle of nature in the HOGAR VERDE we have a beautiful view and many outdoor spaces to condition.
The construction of the HOGAR VERDE is quite an adventure, it is the first time I make furniture and I am really happy to do it.
I love manual activities and for me it is really satisfying to be able to decorate the garden with this self-made furniture.
These last months I bought several carpentry and blacksmith tools for the construction of the GREEN HOME. So it occurred to me to venture first with the manufacture of this outdoor table with capacity for up to 8 people, this is 2 meters long, by 90 centimeters wide and along with it we also made a bench for 3 people.
Design Planning:
The most important thing for the execution of a project is the design, having clear ideas for what we want to build is essential. To plan the design the first thing we thought about was to make use of the wood we already have.
I wanted a rustic style outdoor table with exposed wood and then I thought of a simple industrial style table that matches perfectly with the architecture of the container. After seeing what we had and what we needed we went to do some shopping for materials to get the job started.
We already had the woods, but we needed sealer, varnish and some stain, the first thing I chose was the color I love reddish wood colors, but not so dark so I decided on the color Saman.
For the legs we decided to buy a matte black spray, the hardware store recommended it for wood.
Among all the selection of products we bought ready to use sealer and marine varnish, since this table will be in contact with outside moisture both translucent. We bought a gallon thinking also the one for the Deck we will be building.
The design is super simple industrial type, but instead of being built with wood and iron will be all wood with black painted legs simulate the classic structure of the fusion of iron and wood industrial style.
Materials
- Caribbean pine 15cm x 2.2cm
- Caribbean Pine 14cm x 4.5 cm
- Wood sealer
- Marine Varnish
- Ink (if you want to give color)
Wood screws 12x 3" x 3" * Drywall screws 10x 2" x 2cm - Drywall Screws 10x 2 1/2 in.
- Wood Bits
- White Carpentry Glue
- Black Paint
- Sandpaper 80|120
- Sanding disc for emery board 80|120
Tools
- Tape measure
- Tape measure
- Pencil
- Saw or jigsaw
- Grinder
- Sander
- Drill
- Bits
- Protective lenses
Construction of a Garden Table.
We start the construction of the table by making the measurements on the boards to make the cuts, the wood we use is Caribbean pine wood.
Top of the table.
I wanted an outdoor table long and wide enough to enjoy comfortably with family and friends the nature that surrounds us in VIDA VERDE, the table we currently use where we live is 80cm wide and is a little tight, so we wanted a little wider so we placed it at 90cm wide x 2 mt long. For the top we used 6 boards of 15cm x 2.5 cm that we cut to 2 meters.
We made 6 2 meter wide cuts to the 15 x 2 cm wooden planks this gives us a table comfortable enough for 8 people.
The legs
For me the size of the table is very important, normally we talk about selecting a standard size for everyone's comfort which is 75 cm. But I'm 1.50 mt but Ivan is 1.89 mt, so it can't be so high that I'm uncomfortable or so low that his legs can't fit. After doing several comfort tests, we cut the legs at 73 cm.
Preparing the wood
After making the cuts in the wood, I went through the sander to prepare it to be sealed.
First I used 80 grit sandpaper and finally 150 grit sandpaper, the sealer we bought is really wonderful and after applying the two coats and waiting for the drying time between each one.
| I was a little late with this process, I am used to wireless tools and the sander I bought is not, for me it was really annoying to have to be aware of the cable and extension cord when moving to sand, but I achieved the goal I guess I'll get used to it. |
|---|
Assembling the table
We started with the top of the table, assembling the 6 boards with 15 cm wide, which we cut to 2 mt, building a frame at the bottom that makes the top of the table look more robust, apart from the frame we decided to also place a slat in the center that will give greater support and stability to the table. The screws we had for the frame were longer so when we finished them we cut them with the grinder.
Then we went on to manufacture the legs, these were made according to the industrial design we chose, square in shape with wood 14 cm wide x 4.5 cm thick. Before making the wire we made sure that all the parts were of the same size and sanded them with an emery board.
The entire table was assembled with 3/16 long and 1/2 long flat rods and 12x 3 inch wood screws and 10x 2 1/2 inch drywall screws.
When we put the spray that was recommended at the hardware store for the legs, but this did not have good results when it dried stained to the touch, we thought that maybe it was because of the sealant but then placing a coat of sealant on it did not work. So we did not continue spray painting the pieces. At the end of the process we painted the legs with black enamel paint.
The final assembly of the table
When the legs are ready we finish adjusting with screws the top of the table to the frame and cover the screws with sawdust and white glue to dry, we made a final sanding of some improving some imperfections and then we put the marine varnish, this is ideal for outdoor use.
VIDA VERDE is in a rural area of tropical forest where there are very cloudy days, where there is a lot of fog, rainy days and constant humidity so I hope that this marine varnish has the best results over time. In the end I decided to leave the wood natural without applying any stain.
The Bench
I built the bench with the leftover materials from the cuts we made for the table, with 2 boards of 15 cm wide x 2.5 cm thick and 1.66 cm long, to this I placed 6 slats vertically to give support at the beginning I thought to place only two legs, but to assemble these two legs to the bench I noticed that it was not enough, so I placed a third leg these were also built with the remaining material of the table legs with wood of 14.5 cm wide x 4.5 thick.
I am happy with the result without a doubt it gives me a great satifaction to see the final result, now we are going to build a deck on pallet where we will place the table and the bench along with 3 gray metal Tolix chairs with wooden seat to strengthen even more that industrial and rustic touch that we are looking for.
Diseño y Construcción de una Mesa de Jardín ESP
Hola querida comunidad de la Arquitectura + Diseño el contacto con la naturaleza es algo que amo, por eso crear espacios exteriores para disfrutar de ellos es algo que me apasiona. VIDA VERDE esta en medio de la naturaleza en el HOGAR VERDE tenemos una hermosa vista y muchos espacios exteriores que acondicionar.
La construcción del HOGAR VERDE es toda una aventura, es la primera vez que fabrico muebles y realmente estoy encantada de hacerlo.
Las actividades manuales me encatan y para mi es realmente satifactorio poder decorar el jardín con estos muebles hechos por nosotros mismos.
Estos últimos meses compre varias herramientas tanto de carpintería como de herrería para la construcción del HOGAR VERDE. Así que se me ocurrió aventurarnos primero con la fabricación de esta mesa de exterior con capacidad para hasta 8 personas, esta tiene 2 metros de largo, por 90 centimetros de ancho y junto a ella también fabricamos un banco para 3 personas.
Planificación del Diseño:
Lo mas importante para la ejecución de un proyecto es el diseño, tener las ideas claras para lo que queremos construir es esencial. Para planificar el diseño lo primero que pensamos fue en darle uso a las maderas que ya tenemos.
Yo quería una mesa de exterior de estilo rústico con madera a la vista y entonces pensé en una mesa sencilla estilo industrial hace juego perfecto con la arquitectura de container. Luego de ver lo que teniamos y lo que necesitabamos nos fuimos a hacer algunas compras de materiales para dar inicial el trabajo .
Ya teníamos las maderas, pero necesitábamos sellador, barniz y alguna tinta, lo primero que elegí fue el color me encantan los colores de madera rojiza, pero no tan oscura así que me decidí por el color Saman.
Para las patas decidimos comprar un spray color negro mate, en la ferretería nos lo recomendaron para madera.
Entre toda la selección de productos compramos sellador listo para usar y barniz marino, ya que esta mesa estará en contacto con la humedad exterior ambos translúcidos. Compramos un galón pensando también el del Deck que construiremos.
El diseño es super sencillo tipo industrial, pero en vez de ser construido con madera y hierro será todo de madera con las patas pintadas de negro simularan la estructura clasica de la fusión de hierro y madera del estilo industrial.
Materiales
- Pino Caribe 15cm x 2.2cm
- Pino Caribe 14cm x 4.5 cm
- Sellador para madera
- Barniz Marino
- Tinta (si deseas dar color)
- Tornillos de madera 12x 3 pulgas
- Tornillos de Drywall 10x 2 1/2 pulgas
- Mechas de madera
- Pega Blanca de Carpinteria
- Pintura Negra
- Lijas 80|120
- Disco de lijar para esmeril 80|120
Herramientas
- Cinta métrica
- Escudra
- Lapiz
- Sierra o caladora
- Esmeril
- Lijadora
- Taladro
- Mechas
- Lentes protectores
Construcción de una Mesa de Jardín
Empezamos la fabricación de la mesa haciendo las medidas en las tablas para realizar los cortes, la madera que usamos es madera de pino caribe.
Parte superior de la mesa
Quería una mesa para exterior lo suficientemente larga y ancha para disfrutar comodamente con familiares y amigos la naturaleza que nos rodea en VIDA VERDE, la mesa que usamos actualmente donde vivimos es de 80cm de ancho y queda algo apretada, por lo que queríamos una un poco más ancha así por eso la colocamos a 90cm de ancho x 2 mt de largo .Para la parte superior usamos 6 tablas de 15cm x 2,5 cm que cortamos a 2 metros .
Hicimos 6 cortes de 2 metros de ancho a las tablas de maderas de 15 x 2 cm esto nos da una mesa lo suficientemente cómoda para 8 personas.
Las patas:
Para mi es muy importante el tamaño de la mesa, normalmente se habla de seleccionamos un tamaño estándar para la comodidad de todos que es a 75 cm. Pero yo mido 1.50 mt pero Ivan mide 1.89 mt, así que no puede ser ni tan alto, que yo esté incomoda ni tan bajo que no entren sus piernas. Después de hacer varias pruebas de comodidad los cortes de las patas los realizamos a 73 cm.
Preparando la madera
Luego de realizar los cortes de la Madera pase la lijadora preparandola para ser sellada, para lijar
primero use lija de 80 y por último 150, el sellador que compramos es realmente una maravilla y luego de colocar las dos manos y esperar el tiempo de secado entre cada una.
| Con este proceso tarde un poco , ya estoy acostumbrada a las herramientas inalambricas y la lijadora que compre no lo es , para mi fue realmente molesto tener que estar pendiente del cable y la extension al desplazarme para lijar, pero logre el objetivo supongo que ya me acostumbrare. |
|---|
Armando la mesa
Iniciamos por la parte superior de la mesa, ensambrando las 6 tablas con 15 cm de ancho, que cortamos a 2 mt, construyendo un marco en la parte inferior que hace ver la parte superior de la mesa mas robusta, aparte del marco decidimos colocar también un listón en el centro que dará mayor soporte y estabilidad a la mesa. Los tornillos que teniamos para el marco eran mas largos así que al terminarlos cortamos con el esmeril.
Luego pasamos a fabricar las patas estas las hicimos según el diseño industrial que elegimos , de forma cuadrada con la madera de 14 cm de ancho x 4,5 cm de grosos. Antes de hacer el ensambre nos aseguramos que todas las partes fueran de la misma medida y lijamos con el esmeril.
Toda la mesa la armamos con mechas larga 3/16 y plana de 1/2 larga y Tornillos de madera 12x 3 pulgadas y Tornillos de Drywall 10x 2 1/2 pulgadas .
Al colocar el Spray que nos recomendaron en la ferreteria para las patas, pero este no tuvo buenos resultados al secarse manchaba al tacto , pensamos que tal vez era por el sellador pero ni colocando luego una mano se sellador sobre ella funciono. Así que no no seguimos pintando las piezas con spray. Al final del proceso pintamos las patas con pintura de esmalte negra.
El ensamble final de la mesa
Al estar lista las patas terminamos de ajustar con tornillos la parte superior de la mesa al marco y cubrimos los tornillos con aserrín y pega blanca al secar, realizamos un ultimo lijado de algunas mejorando algunas imperfecciones y pasamos a colocar el barniz marino, este e ideal para el exterior.
VIDA VERDE esta en una zona rural de bosque tropical donde hay días muy nublado, donde hay mucha neblina, días de lluvia y constante humedad así que espero que este Barniz Marino tenga de el mejor resultado con el tiempo. Al final decidi dejar la madera al natural sin colocarle tinta.
El Banco
El banco lo arme con los materiales sobrantes de los cortes que realizamos para la mesa, con 2 tablas de 15 cm de ancho x 2,5 cm de grosos de 1,66 cm de largo, a este le coloque 6 listones a lo vertical para dar soporte al inicio pensé colocar solo dos patas, pero al armar estas dos patas al banco note que no era suficiente, así que coloque una tercera pata estas también se construyeron con el material restante de las patas dela mesa con madera de 14,5 cm de ancho x 4,5 de grosor.
Estoy feliz con el resultado sin duda me da una gran satifacción ver el resultado final, ahora vamos por la construcción de un deck sobre pallet donde colocaremos la mesa y el banco junto a 3 Sillas de Metal Tolix grises con asiento de madera para afianzar aun mas ese toque industrial y rústico que buscamos.