On this occasion we will discuss a little about the process of making wooden ships, one of the obstacles is the lack of wood raw materials, the shipbuilding industry or shipbuilding has become quiet.
In shipbuilding there are several systems including block systems, section blocks and sections. However, in traditional wooden shipbuilding, the system still applies on a traditional scale, where the stages in the manufacturing process are based on traditions that have been passed down from generation to generation.
Planning drawings in wooden shipbuilding is generally based on custom.
Preparation of traditional Wooden Shipbuilding.
In carrying out the work, the preparation and planning that is prepared must be properly provided. Because so that the manufacturing process can run well and in accordance with expectations.
The preparations are as follows:
Location or place of manufacture.
Materials and types of wood
Equipment used.
Labor
Manufacture of the main components of wooden ships
There are several main components that must be prepared before shipbuilding. This main component will determine the stability and standards in shipbuilding.
This Wooden Ship Assembly process is a process of merging one component with another.
Machining system installation
As a ship propulsion, the use of the engine must also be considered properly. There are several criteria in the installation of engines for wooden boats. Among them
- the use of machinery for fishing that requires speed or power.
- The use of the engine to pull the ship's load.
Installation of the fuel system and piping.
The fuel system consists of tanks, such as main fuel oil tanks, daily fuel tanks, oil tanks.
Finishing
Finishing is the final process in the manufacture of shipbuilding. For better results, the process carried out is:
Implementing and concluding.
hatch installation
Cleaning of the whole ship.
Entire ship fixing.
Launching and sea trial
This launching is done when the ship is ready to be built, for the best results, a sea trial is carried out.
