HEN FENCING
Hello friends, how are you? Today I come to introduce you to a very common technique used in my country to keep birds in a delimited area such as a fence. Here I will show you the process that I carried out to obtain this goal. Without further ado, let's get started.
USED MATERIALS
TOOLS
- OPEN HOLES OR PALIN.
- HAMMER.
- SIZE OR TWIST WIRE.
- SHOVEL.
We use in this work:
- Wire 70 meters.
- 6 stakes or sticks
- Wire mesh 8 meters long x 1 meter high.
PLACEMENT OF STICKS OR STAKES
Esté Cercado was made by my father-in-law and my person Alvaro.After having well delimited the space where the fence or division was made, gaps began to be opened
chords for the placement of the stakes. Subsequently placed, these were affirmed on the ground by means of stones and sand until a rigid condition was obtained.
WIRE AND STAPLES DISTRIBUTION
Previously placed and affirmed the stakes, all the wire lines were placed, leaving an approximate separation of 15 cm between each line, this in such a way that the birds could not leave in an aerial way, in this wire pinching technique it should be noted that it is a delicate operation and dangerous made with the size that allows it to be firm with precision. In turn, tensioned, the wire is secured with staples and a hammer against the pole, so it goes from end to end, securing with staples. This process is carried out depending on how many lines are going to be placed in our case we place 8 lines in total.
DISTRIBUTION OF METALLIC FABRIC
The fabric was distributed evenly and was placed from the middle to the bottom holding the wire, while it was being placed it was stretched so that it was uniform. At the end of the process, our hen fence, also applied in Agriculture, was ready.
