Mi versión español.
¡Bienvenido a mi blog!
Hola a toda mi gente de esta comunidad, , doy por participar mi entrada en el concurso de los accesorios de los botones, gracias a mi amiga
que me hizo la invitación y me anime a participar en el concurso, pero ya tenía la idea de participar había comprado en fin de semana unos botones solo que no tenía tiempo de hacer la bisutería, pero hoy me anime gracias a mi amiga que me invito.
Esta ocasión invito a mi amiga
para que se anime y participe en el concurso.
Esta oportunidad le diseñe un hermoso collar con aretes de botones y con piedras de cristales, los materiales que utilice para este juego de collar fue botones de color negro con plateado, piedra de cristales de color plateada y de color azul, hilo naylo, e hilo chino encerado de color negro. Diseñe un par de aretes con hilo naylo con botones de color negro con plateado y piedra de cristales plateada, color azul tipo larguito como a mí me gusta y elabores un collar con hilo chino encerado con un dije de flor con 5 pétalo de botones en el medio le puse un botón con una piedra de cristal de color azul que lo hace ver más elegante y muy juvenil lo puede usar en cualquier ocasión y combinarlo con tu atuendo.
- Empecemos a mostrarle los materiales y el paso a paso de este lindo accesorios.
Materiales.
- 12 botones de color negro con plateado pequeño.
- 1 metro de hilo chino encerado de color negro.
- 30 centímetro de hilo naylo.
- 2 piedra cristales plateado.
- 3 piedra cristales azul.
- 2 sujetadores pequeño para los zarcillos.
- 2 anzuelo de zarcillos.
- 2 broche.
- 2 sujetadores mediano para el collar.
- 1 aro.
- 2 pinza.
- 1 tijera.
- 1 pedazo de foami 4 centímetro de ancho y largo.
- 1 silicón liquido.
Paso.
Primero comienzo elaborando los zarcillos, tomo un pedazo de naylo de 15 centímetro lo recortamos.
Tomamos la punta del naylo lo introducimos en el orificio del botón llevándolo en el medio del naylo, luego introduzco la piedra de cristal de color plateado y la llevamos al lado del botón. Vea cómo se va formando.
Seguidamente introduzco la piedra cristal de color azul, luego tomo el sujetador introducimos el naylo apretamos bien con la pinza para que no se desasga.
Después tomo el anzuelo del zarcillo y lo introducimos en el orificio del sujetador apretamos con la pinza, ya tengo mi primer arete listo. Vea como quedo muy lindo.
Ahora vamos a diseñar el siguiente arete, tomo los 15 centímetro de naylo lo doblamos que quede ambas punta iguales, introducimos el botón lo llevamos en el medio del naylo, introducimos la piedra cristal plateada y luego la piedra de cristal de color azul.
Hacemos los mismos procedimientos del primer arete, tomo el sujetador introducimos en naylo y lo apretamos con la pinza, después introduzco el anzuelo del zarcillo en el orificio del sujetador lo apretamos y tengo listo el segundo arete. Vea como quedo muy lindo.
Ya tengo listo mi par de arete quedaron muy hermoso y delicado.
Procedemos a realizar el dije para collar, tomo un botón y la argolla con la ayuda de la pinza abrimos la argolla introducimos el botón por el orificio y cerramos la argolla con la ayuda de la pinza.
Ahora tomo el pedacito de foami y pegamos con silicón el botón que tiene la argolla en la parte de arriba del foami vamos a formar una flor, le agrego silicón al segundo botón lo pegamos al lado derecho del foami.
Luego pegamos el tercer botón lo pegamos de forma circular hasta ir formando una flor de 5 pétalos que son los 5 botones.
Por últimos pegamos el botón del medio le pegamos una piedra de cristal del color azul para darle un toque más elegante al dije. Le recortamos por las orillas para darle una forma al foami de flor. Vea como quedo muy elegante y hermoso.
Comienzo a elaborar el collar, tomo un pedazo de hilo chino encerado y recortamos 30 centímetro, introducimos la punta del hilo chino, por la argolla del dije y lo llevamos al medio del collar.
Para hacer el cierre del collar, tomamos los sujetadores y lo introducimos en la punta del hilo chino lo apretamos con la ayuda de la pinza.
Después introducimos el broche en el orificio del sujetador de ambos lado de la punta del hilo lo apretamos con la pinza. Tengo listo mi collar.
- Vea lo hermoso y elegante que quedo lo puede usar para cualquier atuendo a mí el particular me encanta lo usare para en cualquier ocasión que se me presente.
Tenga un feliz días y bendecidos para todos muchas gracias por leer mi post.
Las fotos son mías, tomadas con teléfono alcatel , editadas con incollage y traducidas con Deepl.
Mi versión ingles.
¡Bienvenido a mi blog!
Hello to all my people of this community, , I give for participating my entry in the contest of the accessories of the buttons, thanks to my friend
who made me the invitation and I was encouraged to participate in the contest, but I already had the idea to participate I had bought on weekend some buttons only I did not have time to make the costume jewelry, but today I was encouraged thanks to my friend who invited me.
This time I invite my friend
to participate in the contest.
This time I designed a beautiful necklace with button earrings and crystal stones, the materials I used for this necklace set were black and silver buttons, silver and blue crystal stones, naylo thread, and black waxed Chinese thread. I designed a pair of earrings with naylo thread with black buttons with silver plated and silver crystal stone, blue color long type as I like and I made a necklace with waxed Chinese thread with a flower charm with 5 petal buttons in the middle I put a button with a blue crystal stone that makes it look more elegant and very youthful you can use it in any occasion and combine it with your outfit.
- Let's start showing you the materials and step by step of this cute accessory.
Materials.
- 12 black buttons with small silver plated.
- 1 meter of waxed Chinese thread of black color.
- 30 centimeter of naylo thread.
- 2 silver crystals stone.
- 3 blue crystals stone.
- 2 small fasteners for the tendrils.
- 2 hooks for tendrils.
- 2 brooch.
- 2 medium fasteners for necklace.
- 1 hoop.
- 2 tweezers.
- 1 scissors.
- 1 piece of foami 4 centimeters wide and long.
- 1 liquid silicone.
Step.
First I start by making the tendrils, I take a 15 centimeter piece of naylo and cut it out.
We take the tip of the naylo we introduce it in the hole of the button taking it in the middle of the naylo, then I introduce the silver colored crystal stone and we take it to the side of the button. See how it is being formed.
Next I introduce the blue crystal stone, then I take the fastener, we introduce the naylo, we tighten it well with the clamp so that it does not come unfastened.
Then I take the hook of the tendril and we introduce it in the hole of the fastener, we tighten it with the clamp, I have my first earring ready. See how nice it looks.
Now we are going to design the next earring, we take the 15 centimeters of naylo, we fold it so that both ends are equal, we introduce the button, we put it in the middle of the naylo, we introduce the silver crystal stone and then the blue crystal stone.
We do the same procedures of the first earring, we take the fastener, we introduce it in the naylo and we tighten it with the clamp, then we introduce the hook of the tendril in the hole of the fastener, we tighten it and I have ready the second earring. See how nice it looks.
I have my pair of earrings ready, they were very beautiful and delicate.
We proceed to make the pendant for necklace, I take a button and the ring with the help of the pliers we open the ring we insert the button through the hole and close the ring with the help of the pliers.
Now take the piece of foami and glue with silicone the button that has the ring on the top of the foami we are going to form a flower, add silicone to the second button and glue it to the right side of the foami.
Then we glue the third button, we glue it in a circular shape until we form a flower with 5 petals which are the 5 buttons.
Finally, we glue a blue crystal stone to the middle button to give a more elegant touch to the charm. We cut the edges to give a shape to the flower foami. See how elegant and beautiful it is.
I begin to elaborate the necklace, I take a piece of waxed Chinese thread and we cut 30 centimeters, we introduce the tip of the Chinese thread, through the ring of the pendant and we take it to the middle of the necklace.
To make the clasp of the necklace, we take the fasteners and we introduce it in the tip of the Chinese thread and we tighten it with the help of the pliers.
Then we insert the clasp in the hole of the fastener on both sides of the end of the thread and tighten it with the pliers. My necklace is ready.
- See how beautiful and elegant it looked you can wear it for any outfit to me the particular one I love it I will wear it for any occasion that comes my way.
Have a happy day and blessed to all thank you very much for reading my post.
The photos are mine, taken with alcatel phone , edited with incollage and translated with Deepl.