Buenas noches queridos amigos de Hive, espero se encuentren bien y que hayan tenido un buen inicio de semana. Hoy quiero compartir con ustedes un hermoso anillo hecho con cristales de color azul, negro y en el centro una perla negra que tengo de una pulsera que se rompió hace años y reciclo todas los materiales, está pulsera en especial me la regaló mi tía, pero no la pude volver a hacer porque se me cayó estando en la calle y se perdieron algunas perlas, pero logré encontrar algunas que las estoy usando para hacer nuevas prendas.
Este anillo es muy sencillo de hacer, pero tengo que admitir que cuando lo empecé a hacer no veía como podría quedar el resultado final, pero al llegar al final quedé conforme con el resultado, me recordó mucho a una noche oscura pero llena de estrellas, además solo me tarde 20 minutos en hacerlo. Espero les guste.
Los materiales que vamos a necesitar son:
⚫ 14 cristales de 3mm de color negro.
⚫6 cristales de 3mm de color azul oscuro.
⚫ Mostacilla trasparente
⚫1 Perla Negra n° 4
⚫1,5 mt. de nylon trasparente 0, 4
Procedimiento:
Para empezar vamos a introducir tres mostacillas trasparentes, un cristal azul oscuro y cruzamos por un cristal de color negro. Luego por el nylon derecho agregamos tres mostacillas y cruzamos por un nuevo cristal de color negro, pasamos el nylon izquierdo por el cristal de color azul y cruzamos los dos nylon con tres nuevas mostacillas.
Luego insertamos por el nylon de adentro dos un cristal azul oscuro y cruzamos por un cristal de color negro, por el nylon nylon de afuera añadimos tres balines y cruzamos en un nuevo cristal de color negro, pasamos el nylon de adentro por el cristal de color azul oscuro del inicio de este paso y cruzamos en tres nuevas mostacillas.
Repetimos el paso anterior 5 veces más, pero en la quinta vez no cruzamos por 3 nuevas mostacillas, cruzamos por las 3 mostacillas del paso 1, formando así un círculo de cristales, donde los cristales de color azul oscuro estarán en la parte central y los de color negro en la parte exterior del círculo.
Ahora, por el nylon que quedó hacia el interior del círculo introducimos la perla negra y pasamos a las mostacillas del frente, el nylon que quedó hacia la parte exterior lo pasamos por las mostacillas exteriores del círculo y quedamos ubicados en 3 mostacillas para realizar la cadena de mostacillas del anillo.
Por cada lado vamos a insertar dos mostacillas y cruzamos por una nueva mostacilla.
Luego vamos a agregar una mostacilla por cada nylon y cruzamos por una nueva mostacilla. Hacemos esto hasta conseguir un largo que se ajuste a nuestro dedo anular.
Para terminar vamos a insertar dos mostacillas en cada nylon y uno de ellos lo vamos a pasar por las 3 mostacillas opuestas a donde empezamos a hacer la cadena del anillo para luego anudar. Y listo, un anillo nuevo en pocos minutos.
Gracias por ver esta publicación
Que Dios los Bendiga 🙏
- Fotos de mi autoría y fueron tomadas con un celular Samsung Galaxy J6
- Traductor usado: DeepL
- Edición de fotos a través de la app Editor de fotos Polish
- Separadores hechos con la app Editor de fotos Canva.
Good evening dear friends of Hive, I hope you are well and that you have had a good start of the week. Today I want to share with you a beautiful ring made with blue and black crystals and in the center a black pearl that I have from a bracelet that broke years ago and I recycle all the materials, this special bracelet was given to me by my aunt, but I could not make it again because I dropped it in the street and some pearls were lost, but I managed to find some that I am using to make new garments.
This ring is very simple to make, but I have to admit that when I started to make it I did not see how the final result could be, but when I got to the end I was happy with the result, it reminded me a lot of a dark night but full of stars, plus it only took me 20 minutes to do it. I hope you like it.
The materials we will need are:
⚫ 14 crystals of 3mm black color.
⚫ 6 crystals of 3mm of dark blue color.
⚫ Transparent clay.
⚫1 Black Pearl n° 4
⚫1,5 mt. Of transparent nylon 0, 4
Procedure:
To start we are going to introduce three transparent beads, a dark blue crystal and cross through a black crystal. Then through the right nylon we add three beads and cross through a new black crystal, we pass the left nylon through the blue crystal and cross the two nylons with three new beads.
Then we insert through the inside nylon two a dark blue crystal and cross on a black color crystal, through the outside nylon we add three pellets and cross on a new black color crystal, we pass the inside nylon through the dark blue color crystal from the beginning of this step and cross on three new beads.
We repeat the previous step 5 more times, but in the fifth time we do not cross over 3 new beads, we cross over the 3 beads of step 1, thus forming a circle of crystals, where the dark blue crystals will be in the central part and the black ones in the outer part of the circle.
Now, through the nylon that was left towards the inside of the circle we introduce the black pearl and pass to the front beads, the nylon that was left towards the outside we pass it through the outer beads of the circle and we are located in 3 beads to make the chain of beads of the ring.
On each side we will insert two beads and cross through a new bead.
Then we are going to add one bead for each nylon and cross through a new bead. We do this until we get a length that fits our ring finger.
To finish we are going to insert two beads in each nylon and one of them we are going to pass it through the 3 beads opposite to where we started to make the chain of the ring to then knot. And ready, a new ring in a few minutes.
Thank you for watching this publication
God Bless you 🙏
- Photos of my authorship and were taken with a Samsung Galaxy J6 cell phone.
- Translator used: DeepL
- Photo editing using the Polish Photo Editor app.
- Separators made with the Canva Photo Editor app.