Un saludo mis queridos amigos de esta hermosa comunidad y a los hivers que siempre estás activos en la plataforma. Andaba un poco ausente por cuestiones personales, pero ya estoy de vuelta en @Hive, una vez más incursionando en este mundo maravilloso de las joyas y su creación, me ha llenado de mucha alegría ir aprendiendo de todo aquí en esta familia y demostrando cada día más mis habilidades que muchas veces no sabemos que tenemos hasta que nos ponemos a intentarlo. Quiero darles las gracias por el apoyo y por su hermosos mensajes.
En esta oportunidad me inspire en las argollas, cabe destacar que nunca había elaborado unas y dije porque no intentarlo Y aquí les traigo mi resultado.
Ahora les muestro los materiales que utilice en la elaboración de las argollas.
MATERIALES:
- Aretes moldeado color verde.
- Alambre de cobre reciclado.
- Alambre número 28.
- Piedras de Sharosky verdes y amarillas.
- Piedras de cristales.
- Pinza.
PASO A PASO:
PASO 1:
Empecé cortando el alambre de cobre en dos partes para formar una argolla, bueno dos argollas. Y con la ayuda de un marcador le di forma de circulo. Se me hizo un poco complicado porque el alambre de cobre no era tan moldeable pero era el que tenía a la mano y como se trata de darle uso a lo que ya no se esta usando lo tome para hacer la argolla.
PASO 2:
Tomamos alambre número 28 o el más fino que tengan y le hacemos un doblaje para que se quede en forma torcida, Aproximadamente un metro y medio.
PASO 3:
Ahora enrollamos el alambre fino trenzado al alambre de cobre hasta que tapemos por completo el aro y quede por completo forrado con el alambre.
PASO 4:
Cuando tengamos el 95% del aro forrado le colocamos otro medio metro de alambre fino este para ir insertando las piedras, este quedará tapado con el alambre tejido para que no se suelte al momento de insertar las piedras.
PASO 5:
Terminamos con el enrollado y vamos insertando las piedras, Una del color de su preferencia damos una vuelta al alambre alrededor y luego por encima otra para ajustarlas. Este procedimiento lo haremos hasta que se terminen las piedras,yo utilice 16 piedras en una de las argollas,cada Argolla se llevó 8 de color amarillo y 8 de color verde.
PASO 6:
Una vez listas le vamos a colocar los cristales en la parte de abajo para que cuelguen y le den un toque más elegantes a nuestras bellas argollas.
PASO 7:
Finalmente procedemos a colocar los aretes y así tenemos unas hermosas Argollas de Sharosky en Alambrismo, recuerden que pueden usar los colores de su preferencia.
Hasta la próxima 🤗, Gracias por leerme.
¡Saludos!
CREDITS
Las imagenes me pertenecen, fueron tomadas de mi teléfono Redmi Note 11.
Las Fotos fueron Editadas por programa editor de fotos Polish.
traductor: Deepl Traslator.
Greetings my dear friends of this beautiful community and to the hivers who are always active on the platform. I was a little absent for personal reasons, but I'm back in @Hive, once again dabbling in this wonderful world of jewelry and its creation, it has filled me with great joy to be learning everything here in this family and demonstrating every day more my skills that often do not know we have until we get to try. I want to thank you for your support and for your beautiful messages.
This time I was inspired by the rings, it should be noted that I had never made one and I said why not try and here I bring you my result.
Now I show you the materials I used in the elaboration of the rings.
MATERIALS:
- Molded green earrings.
- Recycled copper wire.
- Wire number 28.
- Green and yellow Sharosky stones.
- Stones of crystals.
- Clamp.
STEP BY STEP:
STEP 1:
I started by cutting the copper wire in two parts to form a ring, well two rings. And with the help of a marker I shaped it into a circle. It was a little complicated because the copper wire was not so moldable but it was what I had on hand and as it is about giving use to what is no longer being used I took it to make the ring.
STEP 2:
We take wire number 28 or the thinnest they have and we make a bend so that it stays in a twisted form, approximately one and a half meters.
STEP 3:
Now we wind the fine wire twisted to the copper wire until we completely cover the hoop and it is completely covered with the wire.
STEP 4:
When we have 95% of the hoop lined we place another half meter of fine wire to insert the stones, this will be covered with the woven wire so that it does not come loose when inserting the stones.
STEP 5:
We finish with the winding and we are inserting the stones, one of the color of your preference we give a turn to the wire around and then above another to adjust them. This procedure we will do until the stones are finished, I used 16 stones in one of the rings, each ring took 8 yellow and 8 green.
STEP 6:
Once ready we will place the crystals at the bottom to hang and give a more elegant touch to our beautiful rings.
STEP 7:
Finally we proceed to place the earrings and thus we have beautiful Sharosky's earrings in Alambrismo, remember that you can use the colors of your preference.
Until next time 🤗, Thanks for reading me.
Greetings!
CREDITS
The images belong to me, they were taken from my Redmi Note 11 phone.
Photos were edited by Polish photo editor program.
translator: Deepl Traslator.