Buenas noches, Un grato saludo a todos mis amigos hivers y en esta oportunidad a esta hermosa comunidad de @Jewelry . Primera vez que me animo a realizar alguna joya y me animé hacerlo porque mientras nos esforcemos lograremos lo que querramos.
En esta primera oportunidad elabore un hermoso Anillo de mostacillas blancas y negras con una piedra de sharosky de color cristal lo cual le da un toque de delicadeza. Es un anillo muy fácil de elaborar así que van a quedar realizarlo.
A continuación les dejo los materiales que utilice:
MATERIALES:
- Mostacillas de color blanco y negros.
- 1 piedra de sharosky de cristal.
- Alambre número 16 (Fino).
- Marcador.
- Pinza.
PASO A PASO:
PASO 1:
Tomamos la medida del tamaño que deseamos el anillo con el alambre.(Para este paso podemos utilizar el marcador).
PASO 2:
Vamos colocando las mostacillas de color negro y en medio colocamos la piedra de cristal y seguidamente las otras mostacillas negras hasta tener completo el circulo del anillo.
PASO 3:
Vamos midiendo el tamaño del anillo, recuerden que pueden medirse con el dedo directamente.(Yo lo hago con el marcador para q no se me muevan las mostacillas).ya que se le hace más fácil de esta manera, pero ustedes pueden hacerlo como más cómodas se sientan.
PASO 4:
Colocamos el anillo en el molde y le damos una vuelta más, esto para seguidamente colocar las mostacillas blancas y negras. En el orden de una blanca una negra. Así repetimos el paso hasta llegar al tamaño de la medida que tenemos.
PASO 5:
Ahora hacemos un cruce del alambre para armar el otro extremo del anillo con el mismo procedimiento, una mostacilla blanca y una negra hasta llegar a la misma medida.
Ya va tomando forma nuestro hermoso anillo y se ve tan delicado y hermoso.
PASO 6:
Una vez terminado todo el procedimiento. Damos vueltas del excente del alambre para que se vea más delicado.Cabe destacar que no tengo tanta experiencia en la elaboración de anillos pero me divertí muchísimo,ya que para mí es una experiencia maravillosa poder compartir esta etapa en mi vida. Y me hace muy feliz que contamos con estas hermosas comunidades que nos permiten estar conectados con muchas personas maravillosas que nos incentivan a crecer y creer cada dia en nuestras capacidades. Porque somos capaces de hacer lo que nunca hemos tratado de hacer por miedo.
Y así nos queda nuestro hermoso anillo delicado rápido y súper fácil para su elaboración, Con muy pocos materiales y sin que nos afecte tanto lo monetario y nos regalamos algo hermoso hecho por nuestra hermosas manos.
Espero les halla gustado y disfruten haciendo ustedes sus propios anillos 😉.nunca es tarde para aprender y realizar nuestras propias joyas.
Hasta la próxima que Dios me los llene de bendiciones. Y espero le guste mi elaboración,con mucho cariño amor y dedicación. Esperando mejorar mis técnicas y ejecutar otras joyas para ustedes.
Gracias por leerme.
¡Saludos!
CRÉDITOS
Las imagenes me pertenecen, fueron tomadas de mi teléfono Redmi Note 11.
traductor: Deepl Traslator.
Foto editada en editor polis.
Good evening, A warm greeting to all my friends hivers and this time to this beautiful community of @Jewelry. First time that I encourage me to make some jewelry and I encouraged me to do it because as long as we strive we will achieve what we want.
In this first opportunity I made a beautiful ring of black and white beads with a crystal sharosky stone which gives a touch of delicacy. It is a very easy ring to make so you will be able to make it.
Here are the materials I used:
MATERIALS:
- White and black beads.
- 1 crystal sharosky stone.
- Number 16 wire (fine).
- Marker.
- Tweezers.
STEP BY STEP:
STEP 1:
We take the measure of the size that we want the ring with the wire (For this step we can use the marker).
STEP 2:
We place the black beads and in the middle we place the crystal stone and then the other black beads until we have completed the circle of the ring.
STEP 3:
Let's measure the size of the ring, remember that you can measure it with your finger directly (I do it with the marker so that the beads don't move), since it is easier this way, but you can do it as you feel more comfortable.
STEP 4:
Place the ring in the mold and give it one more turn, then place the white and black beads. In the order of one white and one black. Repeat this step until we reach the size of the size we have.
STEP 5:
Now we make a crossing of the wire to assemble the other end of the ring with the same procedure, one white and one black bead until we reach the same size.
Our beautiful ring is already taking shape and it looks so delicate and beautiful.
STEP 6:
Once the whole procedure is finished. It should be noted that I do not have much experience in the development of rings but I had a lot of fun, because for me it is a wonderful experience to share this stage in my life. And it makes me very happy that we have these beautiful communities that allow us to be connected with many wonderful people who encourage us to grow and believe every day in our abilities. Because we are capable of doing what we have never tried to do out of fear.
And so we have our beautiful delicate ring, quick and super easy to make, with very few materials and without affecting us so much money and we give us something beautiful made by our beautiful hands.
I hope you liked it and enjoy making your own rings 😉.it is never too late to learn and make our own jewelry.
Until next time may God fill me with blessings. And I hope you like my elaboration, with much love, affection and dedication. I hope to improve my techniques and make other jewels for you.
Thank you for reading me.
Greetings!
CREDITS
The images belong to me, they were taken from my Redmi Note 11 phone.
translator: Deepl Traslator.
-Photo edited in editor polis.