Para mí es un placer estar nuevamente por aqui compartiendo con todos ustedes.
En el dia de hoy les traigo una hermosa pulsera con piedras blancas que me gustó mucho como se ve.
Desde hace dias queria hacer una pulsera, pero no cualquiera. La quería tada de color blanco pero no contaba con todo el material, es decir me hacía falta el hilo. Así que el dia de ayer fui y compre el hilo que necesitaba para realizarla. Estaba tan feliz, que ese mismo día la quería hacer, pero no me dio chance, por lo que en la noche cuando ya todos dormían, me senté a hacerla hasta terminarla.
Esta pulsera de color blanco se mira muy bonita y elegante. Para serles honesta, así era como la quería, ya que la puedo usar para cualquier salida u ocasión especial. Aunque no soy amante a usar estos accesorios, les cuento que desde que empecé a trabajar y relacionarme con el mundo de las piedras, collares y pulseras, me he animado a usarlas y cuando voy a llevar a los niños al colegio, me la coloco y se mira muy bien.
Los materiales que usé para crear esta pulsera fueron los siguientes:
🌸 Hilo chino blanco
🌸 Piedras
🌸 Tijera
🌸 Medidor (cinta métrica)
🌸 Encendedor
Lo primero que hice fue tomar dos hebras de hilo de 80 centímetros cada uno. Luego medir 20 centímetros más y ahí mismo marcar haciendo un nudo.
Tomamos las dos puntas y quemamos para que la punta nos quede más finita y podamos introducir el hilo. Una vez lista, empezamos a introducir nuestras primera piedra pasamos una punta y la otra punta la metemos del lado contrario y helamos con mucho cuidado las dos puntas para que no se enrede.
A partir de allí usaremos dos piedras. Primero por un lado insertamos las dos piedras y luego tomamos la otra punta y la metemos por el lado opuesto y vamos halando poco a poco.
Este mismo paso lo vamos hacer hasta donde tengamos nuestra medida en mi caso lo deje hasta aquí y le realicé un nudo.
Una vez lista nuestra primera parte, seguimos con la otra. Donde habíamos marcada con el nudo, lo soltamos y a partir de allí empezaremos con la otra parte. Mismo procedimiento, pero antes colocamos en el centro alguna piedra que queramos que resalte nuestra pulsera. En mi caso, usé esta que desconozco su nombre, pero me gustó el modelo que posee y el color combinaba con las piedras blancas asi que me decidi por esta piedra.
Para esta parte, usamos el mismo procedimiento anterior hasta terminarla. Para darle un último retoque y que no me quedara tan sencilla, le hice un nudo corredizo y le agregué un piedra en cada nudo para que se notara mas preciosa.
Estos fueron los resultados que obtuve de esta increíble pulsera. Me encantó como se ve con todas las piedras unidas uniformemente con su color blanco que se mira tan elegante. Esta es la segunda pulsera que realizo y honestamente esta me gustó mas, aunque la otra también tiene su encanto.
Espero seguir compartiendo con ustedes.
Saludos.
For me it is a pleasure to be here again sharing with all of you.
Today I bring you a beautiful bracelet with white stones that I really liked how it looks.
For days I wanted to make a bracelet, but not just any bracelet. I wanted it in white but I didn't have all the material, that is to say I needed the thread. So yesterday I went and bought the yarn I needed to make it. I was so happy, that I wanted to make it that same day, but I didn't have the chance, so at night when everyone was asleep, I sat down to make it until I finished it.
This white bracelet looks very pretty and elegant. To be honest, this is how I wanted it, since I can wear it for any outing or special occasion. Although I am not a lover of wearing these accessories, I tell you that since I started to work and relate to the world of stones, necklaces and bracelets, I have been encouraged to use them and when I go to take the kids to school, I put it on and it looks great.
The materials I used to create this bracelet were as follows:
🌸 White Chinese thread.
🌸 Stones
🌸 Scissors
🌸 Measurer (tape measure).
🌸 Lighter
The first thing I did was to take two strands of yarn of 80 centimeters each. Then measure 20 more centimeters and right there mark by tying a knot.
We took the two ends and burned them so that the end would be thinner and we could introduce the thread. Once ready, we begin to introduce our first stone we pass one end and the other end we put it on the opposite side and we freeze very carefully the two ends so that it does not tangle.
From there we will use two stones. First on one side we insert the two stones and then we take the other end and insert it on the opposite side and pull it little by little.
This same step we are going to do until we have our measure in my case I left it up to here and I made a knot.
Once our first part is ready, we continue with the other part. Where we had marked with the knot, we release it and from there we will start with the other part. Same procedure, but before we place in the center a stone that we want to highlight our bracelet. In my case, I used this one that I do not know its name, but I liked the model that has and the color combined with the white stones so I decided for this stone.
For this part, we used the same procedure as before to finish it. To give it a final touch and to make it not so simple, I made a sliding knot and added a stone in each knot to make it more precious.
These were the results I got from this amazing bracelet. I loved the way it looks with all the stones evenly joined together with its white color that looks so elegant. This is the second bracelet I made and honestly I liked this one better, although the other one also has its charm.
I hope to continue sharing with you.
Greetings.