Hello, I hope everyone is well, this is a great month to celebrate, and look good on the date. That's why I'm pleased to come show you a very nice and simple step-by-step guide on how to make a set of accessories inspired by skulls, which could very well make us look great for tonight. Use the wire and jewelry technique for them. I hope you like it and enjoy.//
Hola, espero todos se encuentren bien, este es un gran mes para celebrar, y lucir al toque de la fecha. Por eso me complace, venir a mostrarles un muy bonito y sencillo, paso a paso de cómo hacer un juego de accesorios Inspirado en calaveras, que bien nos podría hacer lucir estupendas para esta noche. Use para ellos la técnica de alambrismo y bisutería. Espero sea de su agrado y disfruten.
Materials/Materiales.
. Wire n 0.5
. Jewelry pin.
. Hook for Earrings.
. Black and white beads.
. Small staples.
. Jewelry tweezers.//
. Alambre n 0.5
. Pasador de bisutería.
. Anzuelo para Aretes.
. Chaquiras de color negro y blanco.
. Grapas pequeñas.
. Pinzas de bisutería.
Step/Pasos.
1.) I cut, with the tweezers, 50cm of wire, I fold it in equal parts and in the cut, of the wires, with the round tip tweezers, I twist both parts of the wire and like this, I will make a small ring, I insert between both tips, the staple and I adjust with the tweezers, flat.
1.) Corto, con la pinza 50cm de alambre, doblo en partes iguales y en el corte, de los alambres, con la pinza punta redonda, doy giro a ambas parte de el alambre y asi, haré un pequeño arito, Introduzco entre ambas puntas, la grapa y doy ajuste con la pinza, plana.
2.) I place five black beads on each side of the wires and take them to the bottom, on the right side I insert five white beads, I take them to the end and the wire on the left side, I insert the wire , adjusted and ordered the beads.
2.) Coloco en cada lado de los alambres, cinco, chaquiras de color negro y llevo hasta el fondo, en el lado derecho Introduzco cinco chaquiras, de color blanco, llevo hasta el final y el alambre de el lado izquierdo, introduzco el alambre, ajusto y ordenó las chaquiras.
3.) In the next pass, I place seven white beads and continue interweaving the other side of the wire, the next pass, two white, one black, two white, one black, two white, and I intertwine the wire again passing the beads. For the next one, I introduce three beads, one black and three white. Continuous, with five white beads, then four black beads and finally three white beads. Thus, the Skull of beads is formed. I will hide the residual wire, inside the holes from the previous pass, passed through, alone from side to side and cutting the residue. In this way, I make the following skull.
3.) En la siguiente pasada, coloco siete chaquiras de color blanca y sigo entrelazando el otro lado de el alambre, la siguiente pasada, dos blancas una negra, dos blancas una negra, dos blancas, y entrelazó nuevamente el alambre traspasando las chaquiras. Para la siguiente, Introduzco tres chaquiras, una de color negro y tres de color blanca. Continuo, con cinco, chaquiras de color blanca, luego cuatro de color negro y para finalizar tres de color blanco. Quedando así formada la Calavera de chaquiras. El alambre residual lo esconderé,por dentro de los orificios de la pasada anterior,traspasado, solos de lado a lado y cortando el residuo. De esta manera,hago la siguiente calavera.
4.) I open the earring hook with the tweezers and place the skull and close it, thus leaving the earrings ready.
4.) Abro con la pinza el arito, originario de el anzuelo para aretes y coloco la calavera y cierro, quedando así listo los aretes.
5.) For the Bracelet, I put together a third skull, just like the first two, except that at the other end or lower part of the skull, I make another hoop, I cut two pieces of wire, on one side, I place a first , piece of wire I make several turns between them and start on one side to place, five black beads, good white, a group of black and separated by a white one. In this way, I make six groups of black beads and At the end, with the residual wire, he formed a small ring with the tweezers. On the next side, three groups of five, beads separated by a black bead. And at the end, I insert the pin and with the clamp I make a small ring involving the pin.
5.) Para la Pulsera, Armó una tercera calavera, tan como las dos primeras, a diferencia, que en el otro extremo o parte inferior de la calavera, hago otro arito, corto dos trozos de alambre, en un lado, coloco un primer,trozo de alambre doy varios giros entre ellos y comienzo en un lado a colocar, cinco chaquiras de color negro,buena blanca, un grupo de color negro y separada por una blanca.de esta manera, hago seis grupos de chaquiras de color negro y en el extremo, con el alambre residual formó un pequeño arito con las pinzas. En el siguiente lado, tres grupos de cinco, chaquiras separadas por una chaquira de color negra. Y en el extremo, Introduzco el pasador y con la pinza hago un pequeño arito involucrando al pasador.
In this way, I have concluded.// De esta manera, he concluido.
All photos are my property, taken with my property, taken with my smartphone.
. Use InShot
. Use Google Translate.
Grateful for your visit to my blog, you will always be welcome. Until next opportunity.//
. Todas las fotos son de mí propiedad, tomadas con mí propiedad, tomadas con mí teléfono inteligente.
. Use InShot
. Use traductor Google.
Agradecida por su visita a mí blog, siempre serán, bienvenidos. Hasta una próxima oportunidad.