Holaaaaa! Artistas Creativos de esta prestigiosa comunidad de la joyería, un saludos para todos cargado de muchas energías positivas y buenas vibras; les cuento que las tormentas siguen en su punto todos los días las lluvias son más fuertes y las señales y el internet caóticos, pero bueno ni hay mal que dure cien años ni cuerpo que lo resista, así que a seguir haciendo joyas para complacer a mi exquisita clientela, Tony quedó muy a gusto con su pulsera y dispuesto a esperar turno para hacer otro encargo.
Mi manualidad de hoy la realice con la técnica del alambrismo, y consiste en una sencilla pero muy bonita Pulsera y unos zarcillos haciendo juego; aquí les dejo el paso a paso de su elaboración; sigan leyendo para que vean como lo hice:
Hellooooo! Creative Artists of this prestigious jewelry community, greetings to all full of positive energy and good vibes; I tell you that the storms are still at their point every day the rains are stronger and the signals and the internet are chaotic, but well there is no evil that lasts a hundred years or a body that resists it, so keep making jewelry to please me exquisite clientele, Tony was very pleased with his bracelet and willing to wait his turn to make another order.
My craft today is done with the wire technique, and it consists of a simple but very pretty bracelet and some matching earrings; here he left you the step by step of its elaboration; Read on to see how I did it:
LOS MATERIALES QUÉ USE EN SU ELABORACIÓN FUERON LOS SIGUIENTES:
- Alambre color naranja.
- Seis cubitos acrílicos color
negro. - Azuelos para aretes
plateados. - Pinza redonda.
- Pinza de corte.
- Pinza cuadrada.
THE MATERIALS USED IN ITS ELABORATION WERE THE FOLLOWING:
- Orange wire.
- Six colored acrylic cubes
black. - Hooks for earrings
silvery. - Round clamp.
- Cutting clamp.
- Square clamp.
Este collar y aretes los elaboré con un alambre de color naranja que extraje de un cable de televisión y me pareció muy decorativo y propicio para hacer este juego de bisutería.
Así que usando estos pocos y sencillos pasos comenzaré a elaborarlos.
I made this necklace and earrings with an orange wire that I took from a television cable and I found it very decorative and conducive to making this jewelry set.
So using these few easy steps I'll start crafting them.
PRIMER PASO: comienzo tomando una cinta metrica, y mido diez centímetros en el alambre color naranja, usando la pinza de corte, ahora tomando como medida la parte trasera de un pincel para que me queden todas iguales enrrollo haciendo un espiral saco mi resorte y usando de nuevo la pinza de corte como se ve en fotos corto varios aritos y formo las argollas para realizar mi manualidad.
FIRST STEP: I start by taking a tape measure, and I measure ten centimeters on the orange wire, using the cutting pliers, now taking the back of a paintbrush as a measure so that they are all the same, I wind up making a spiral I take out my spring and using again the cutting clamp as seen in photos I cut several rings and form the rings to make my craft.
SEGUNDO PASO: en este paso voy a elaborar uno de los .módulos para formar mi pulsera para ello corto un trozo del alambre naranja de diez centímetros, con la pinza redonda voy hacer una argolla en la punta,luego introduzco una de los cubitos acrílicos negros y de nuevo usando la pinza redonda realizó otra argolla; con la pinza de corte quitó el excedente del alambre y así queda uno de los módulos para realizar la pulsera.
SECOND STEP: in this step I am going to make one of the modules to form my bracelet. For this I cut a ten centimeter piece of orange wire, with the round pliers I am going to make a ring at the end, then I insert one of the black acrylic cubes and again using the round clamp made another ring; With the cutting pliers he removed the excess of the wire and thus one of the modules remains to make the bracelet.
PASO TRES: en este paso voy a formar el segundo modulo para la elaboración de la manualidad: corto diez centímetros del alambre naranja y como en el módulo anterior realizó una argolla en el extremo del alambre, mido centímetro y medio de separación y realizó otra argolla, luego sin cortar el alambre voy enrrollando hasta la primera argolla y allí corto el excedente del alambre, remato con la pinza plana para dejar prolijo mi trabajo y este será mi segundo modulo que usaré como separador. (ver las fotos)
STEP THREE: in this step I am going to form the second module for the elaboration of the craft: I cut ten centimeters of the orange wire and as in the previous module I made a ring at the end of the wire, I measure a centimeter and a half apart and made another ring , then without cutting the wire I wind up to the first ring and there I cut the excess wire, I finish with the flat pliers to make my work neat and this will be my second module that I will use as a separator. (see the photos)
Así quedaron elaboradas las piezas con las que voy armar mi pulsera y aretes.
This is how the pieces with which I am going to assemble my bracelet and earrings were made.
PASO CUATRO: ahora comienzo la elaboración de la pulsera: tomo un módulo y coloco una argolla, como se ve en las fotos, en la misma argolla pongo un separador y así voy colocando una argolla un módulo un separador hasta colocar cuatro módulos y cinco separadores que es el largo deseado para mi pulsera.
STEP FOUR: now I begin the elaboration of the bracelet: I take a module and place a ring, as seen in the photos, in the same ring I put a separator and in this way I place a ring one module one separator until I place four modules and five separators which is the desired length for my bracelet.
PASO CINCO: ahora realizo la tranca, como se ve en la fotos y la coloco en un extremo de la pulsera usando la pinza redonda, usamos la argolla del separador del otro extremo para introducirlo cómo cierre y así queda terminada la pulsera.
STEP FIVE: now I make the lock, as seen in the photos and place it on one end of the bracelet using the round clamp, we use the ring of the spacer on the other end to insert it as a closure and thus the bracelet is finished.
PASO SEIS: En este paso realizó los aretes: tomo un módulo una argolla y un separador y los uno entre si como en las fotos, luego usando una argolla más pequeña coloco el anzuelo en la argolla del separador y así quedan.
STEP SIX: In this step, he made the earrings: I take a module, a ring and a spacer and join them together as in the photos, then using a smaller ring I place the hook in the ring of the spacer and they remain that way.
Artesanos creativos de jewerly, este es el resultado final de mi manualidad de este día, espero como siempre sus valiosos comentarios y apoyo a esta publicación, que tengan un feliz día y nos vemos en la próxima manualidad.
Creative jewerly craftsmen, this is the final result of my craft for today, as always I hope your valuable comments and support for this publication, have a happy day and see you in the next craft.
Las imágenes y redacción de este tutorial son de mi propiedad las fotos fueron tomadas con mi celular Motorola E6 y las edite con una aplicación gratis del mismo.
Para traducir texto usé geogle traduuctor.
The images and writing of this tutorial are my property, the photos were taken with my Motorola E6 cell phone and I edited them with a free application of the same.
To translate text I used geogle translator.