Para el día de hoy quiero compartir con ustedes la elaboración de un brazalete bastante sencillo, nada pretencioso, compuesto de cuentas marrones y perlas, ambas de tamaño mediano, y como cada accesorio que he realizado es bastante sencillo, la verdad no tiene nada de complicación ni tampoco mucho trabajo, así que es una pieza que les va a encantar sobre todo si están comenzando a trabajar con la bisutería o quieren iniciar.
Today, I’d like to share with you how to make a fairly simple, unpretentious bracelet made of medium-sized brown beads and pearls. Just like every piece of jewelry I’ve made, this one is quite simple—it’s really not complicated at all and doesn’t take much effort—so it’s a piece you’re going to love, especially if you’re just starting out with jewelry making or want to give it a try.
Este brazalete tiene cuentas circulares en un tono marrón con unos destellos súper lindos que no sé si pueden apreciar bien en las fotos, pero tienen un toque muy bonito y están acompañados por perlas medianas y balines mini, y para mí es un accesorio para el día a día, ya que como ven es bastante sencillo, pero no deja de ser muy bonito, y por aquí les dejo los materiales y el paso a paso.
This bracelet features round brown beads with some really cute sparkles—I’m not sure if you can see them clearly in the photos, but they add a lovely touch—paired with medium-sized pearls and tiny beads. For me, it’s the perfect everyday accessory: as you can see, it’s quite simple, but still very pretty. Here are the materials and step-by-step instructions.
Materiales
Cuentas marrones en tamaño mediano
Perlas medianas
Balines dorados en tamaño mínimo
Balines medianos
Alfileres de ojo
Argolla pequeña
Cerrador de broche
Tenaza
Pinza de punta plana
Pinza de punta redonda
Materials
Medium-sized brown beads
Medium-sized pearls
Small gold seed beads
Medium-sized seed beads
Eye pins
Small jump ring
Clasp
Pliers
Flat-nose pliers
Round-nose pliers
Paso a paso/Step by step
Para este brazalete vamos a utilizar 3 piezas diferentes, una de ellas va a estar compuesta por balines mini y una perla, otra será una cuenta marrón en solitario y la siguiente un balín mediano en solitario también, que por supuesto, vamos a conectar entre sí para crear nuestro diseño.
Y para comenzar con la primera pieza, que va a ser la perla, vamos a utilizar un alfiler de ojo, por el cual haremos pasar un balín mini, seguido de la perla y finalmente otro balín, y como siempre cortamos el excedente del alfiler de ojo, dejando un centímetro aproximadamente, y con ayuda de la pinza redonda, creamos nuestro ojito que es el que nos va a servir para conectar las piezas entre sí.
For this bracelet, we’re going to use three different pieces: one will consist of mini beads and a pearl, another will be a single brown bead, and the third will be a single medium bead. Of course, we’ll connect them together to create our design.
To start with the first piece—the pearl—we’ll use an eye pin. We’ll thread a mini bead onto it, followed by the pearl, and finally another bead. As always, we’ll cut off the excess eye pin, leaving about one centimeter, and using the round-nose pliers, we’ll create the eye, which we’ll use to connect the pieces together.
La segunda pieza es solo la cuenta marrón, y lo que necesitaremos será un alfiler de ojo y, por supuesto, nuestra cuenta, y lo que haremos será pasar por el alfiler de ojo la cuenta marrón, cortamos el alfiler dejando un centímetro y procedemos a crear nuestro arito con ayuda de la pinza redonda para que ambos extremos tengan de donde conectar piezas.
The second piece is just the brown bead. We’ll need an eye pin and, of course, the bead itself. First, thread the brown bead onto the eye pin, then cut the pin, leaving about an inch of wire. Next, use the round-nose pliers to form a loop so that both ends have a place to attach other pieces.
La última pieza que vamos a necesitar es un balín, y el procedimiento es exactamente el mismo que realizamos anteriormente, y con esto ya tendremos listo todo lo necesario para armar el brazalete.
Por supuesto de cada pieza van a elaborar la cantidad necesaria para obtener el largo deseado para su pulsera.
The last piece we’ll need is a bead, and the process is exactly the same as before. With that, we’ll have everything we need to assemble the bracelet.
Of course, you’ll need to make as many of each piece as necessary to achieve the desired length for your bracelet.
En este punto comenzaremos a conectar las piezas, y en este caso ustedes deciden el patrón que van a seguir, en mi caso yo decidí colocar una perla, seguida de un balín dorado y, finalmente, la cuenta marrón, y este procedimiento lo repetí hasta completar el largo de mi brazalete.
Ahora bien, para conectar las piezas entre sí, vamos a necesitar la pinza redonda y la pinza plana, y lo que hacemos es abrir un poco uno de los extremos de nuestra pieza, y conectamos a ella la siguiente según nuestro diseño.
Finalmente cerramos con ayuda de la pinza plana, asegurándonos que queden bien cerradas para que nuestra pulsera no se desarme.
At this point, we’ll start connecting the pieces, and in this case, you decide which pattern to follow. In my case, I decided to place a pearl, followed by a gold bead, and finally a brown bead, and I repeated this process until I reached the desired length of my bracelet.
Now, to connect the pieces together, we’ll need the round-nose pliers and the flat-nose pliers. What we do is open one end of our piece slightly and connect the next piece to it according to our design.
Finally, we close it using the flat-nose pliers, making sure it’s securely closed so our bracelet doesn’t come apart.
Y ya para finalizar nuestro brazalete, lo que haremos será conectar las piezas que nos sirven para cerrar nuestro accesorio y en este caso utilizamos una argolla pequeña y un cerrador de broche, y para incorporarlo a nuestro brazalete simplemente abrimos un poco el "ojo" de la última pieza y conectamos en un extremo la argolla y en el otro extremo el cerrador y de esta forma tenemos listo nuestro accesorio.
And to finish off our bracelet, we’ll connect the pieces used to fasten it—in this case, a small ring and a clasp. To attach them to the bracelet, simply open the "eye" of the last piece slightly, then attach the ring to one end and the clasp to the other. And just like that, our bracelet is ready.
Como ven es un trabajo muy sencillo, y con estos mismos materiales se pueden crear brazaletes con diferentes estilos y diseños, ya que todo depende de su creatividad e imaginación.
As you can see, it’s a very simple project, and using these same materials, you can create bracelets in different styles and designs—it all depends on your creativity and imagination.
📷Photography by|Fotografía por:,🔅 Cover created in/Portada creada en Canva, Separator and banner/separador y banner, 🇺🇸Translated with www.DeepL.com/Translator (free version)