Hola a todos✨❤️
Hello everyone✨💔
I hope you are very well in this nice afternoon, a very special greeting to all the Jewelry community.💎 I really like this community and how each person has a different style when creating any piece, it's quite nice.❤️✨
A few posts back I have been mentioning that I have at my disposal quite a few pieces of copper wire which I took with a lot of effort from the inside of a cable; little by little I have been using it for different things.♻️💡 I have two wires of different thickness but being recycled I can't specify much, the first one is a bit hard and I find it a bit difficult to shape with this one. The other wire is a little thinner and more malleable.👍🏻
The fact is that it occurred to me to craft a choker in the shape of a broken heart just with wire and I have taken quite a while to do it just thinking about the way of crafting.😅💡 I like to have different things and I think it matches very well with my style.💗💖✨
Espero te guste este pequeño tutorial ✨
I hope you like this little tutorial ✨
| Materiales que necesitas | Materials you need |
|---|---|
| • Alambre | • Wire |
| • Esmalte de uñas | • Nail polish |
| • Silicón | • Silicone |
| • Pegamento | • Glue |
| • Brillantina | • Glitter |
| • Foami | • Foam |
Empecemos💔✨
Let's start 💔✨
1- First I drew the broken heart shape on a little piece of cardboard,💔📦 then I took the wire and started to shape it with the tweezers little by little until I had a shape similar to the one in the drawing.👍🏻
2- I put the wire around my neck and marked the place where I would start shaping the other half of the heart.✨ I then did it little by little.
3- I cut with the pliers the excess wire and only left a little bit of wire. ✂️ With the thinner wire I adjusted both sides so that both parts of the heart would not come apart.
4- I took the nail polish and applied the red color on both parts of the heart 💔. 🖤 The rest of the wire I painted it black and let it dry.
5- I placed the foami under the wire and with a needle I marked the shape of both parts of the heart, then I cut it ✂️ very carefully so that they were almost the exact shape of these 💔.
6- I glued the foami parts very carefully on the inside with cold silicone and then applied two coats of enamel and let it dry for about an hour.⏳
7- Finally, using glue and a brush, I applied black glitter around the edges of the heart and finished by applying a coat of clear varnish.✨
Resultado final💔✨
Final result💔✨
I hope you liked this little tutorial, remember that you can make things just as nice and even better than this with a lot of love and dedication.❤️ ♻️Recycling is one thing I always try to do in my tutorials, just to show that you can make very nice things with recycled material.
My mother often jokingly says that I keep junk, but it's just that I try to throw away as little as possible some things that I find useful.✨💡 I have used this cable for many things and I am very happy with the results I have gotten.❤️✨💔
