So these first three images show me creating a custom hollow tube of any color by starting with a 10mm blow tube, with the end flared out and then I take solid rods of premade color (not pictured here gotta find better example pictures or take them) and place both the blow tube and the rod of color into the torch at the same time, constantly spinning them in my fingers to allow for even heating. My torch runs almost 6000° I burn propane and oxygen together, I'm waiting on a new torch in the mail currently and I'm super excited for the upgrade!
But while both items are spinning I start laying the rod around the flare to achieve what's known as a coil pot, or the beginning of a tube. Depending on the shape and size you are going for you may need many rods of color, using a clear glass rod attached to the bottom as a handle to keep your fingers out of the fire 🔥! One rod gets a tube of average thickness 3-4 inches maybe, and you want to give yourself excess room to work if possible.

![]
(
)

You can see my skill increase over time, this art takes a ton of practice and skill. This blank below is probably the cleanest wall weight I've created yet. Could've been longer for sure though sometimes I'm just experimenting (most times)
![]
(
)
This is one of my first completed two piece pipes





A lot of the rest of the process is difficult to catch verbally and without video. Once this tube is created I use heat and gravity to shape the pipe head by blowing a bubble, then once that is evenly heated and formed I pop a hole using a tight sharp flame and more breath, then soften the flame and heat around the hole to use a bowl push to create the indentation, and then sharpen the flame again to pop the carb hole on the preferred side. After that an artist can apply dots or accents, thicken or shape the tube body, and eventually heat the connection to the blow tube to pull it back cut the glass open and use a reamer to even out the mouth piece. This step requires sure hands and grace to make them perfect and consistent, definitely one of my learning curves!
I hope this tutorial was a little better and more detailed than my last, everyone let me know how I could present it better in your opinion down below! Thanks for the read
My Referrals...
SPLINTERLANDS < --- *** This game is the bees knees, and my favorite p2e right now****
PYME token airdrop/quests < --- This is a very simple airdrop to join, just a lot of Discord joining and Twitter Sharing - tons of free NFTs and tokens to be had here ****
Earn extra Paypal cash for Sharing your link, one click here to begin earning <--- This one is a little more spam-like, but theres no account required, just get visitors and get pennies. cashout at $25.
If you've been thinking about joining ListNerds <-- Haven't gotten very far here myself, but I plan on it
If you haven't signed up for Coinbase <-- Free $10 for both of us if you sign up and deposit $100 within 30 days
ZETALABS AIRDROP - 5,000 ZP + 1,000/day
It's easy to buy and sell on Mercari. Get up to $30 when you get started. Use code NDUSNK when you sign up with my link: [https://merc.li/F4njqE7sb](https://merc.li/F4njqE7sb